2.5113 | Rear Sway Bar-Endlink Bushings - 19 mm | Wrangler JK

  • 2.5113 360image 1
  • 2.5113 Rear Sway Bar and Endlink Bushings- 19mm (0.74 inch)
  • 2.5113 Rear Sway Bar and Endlink Bushings- 19mm (0.74 inch)
  • 2.5113 Rear Sway Bar and Endlink Bushings- 19mm (0.74 inch)
  • 2.5113 Rear Sway Bar and Endlink Bushings- 19mm (0.74 inch)
  • 2.5113 Rear Sway Bar and Endlink Bushings- 19mm (0.74 inch)
  • 2.5113 360image large 1

Rear Sway Bar and Endlink Bushings- 19mm (0.74 inch)

Manufacturer: Energy Suspension
Part Number: 2.5113

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $36.92

check_box In Stock check_box Ships Immediately


  • 2 of Sway Bar Bushings - 5931
  • 2 of Metal Sleeves - 15.10.564.39 (.750 X .480 X 1.500 inch)
  • 2 of End Link Bushings - 8376
  • 2 of Metal Washers - 15.03.57.39 (1.250 X .500 X .080 inch)
  • Installation Instructions - 17073
Suggested part for 2.5113: dll120
dll120 Front Sway Bar Lateral Locks - 19-20mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.

Suggested part for 2.5113: kll120
kll120 Sway Bar Lateral Locks - 19-20mm
Whiteline Gold Color Plated - 3 Year Warranty

Suggested part for 2.5113: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
3 - 5ML High Performance Grease by Energy

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 2.5113 to spf1138-22k
SuperPro spf1138-22k
Polyurethane.
Price: $36.99
Warranty: Lifetime

FitmentRear Sway Bar and Endlink Bushings- 19mm (0.74 inch) 2.5113 fits these vehicles:
Details

2.5113 | Rear Sway Bar-Endlink Bushings - 19 mm | Wrangler JK

Only Fits 19mm Bar

Energy Suspension Sway Bar Bushings

Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Energy Sway Bar Bushing
Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Be sure to use Formula 5

The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif

compare_arrows Compare with Similar Parts


This Part
2.5113 compare
$36.92
  • star_borderstar_borderstar_borderstar_borderstar_border
  • This part
  • Bushing Material: Polyurethane
SuperPro
SuperPro compare
$36.99
($0.07) more expensive
  • star_borderstar_borderstar_borderstar_borderstar_border
  • Bushing Material: Polyurethane