unarchive In The Box of 11.5103 keyboard_arrow_down
- 2 - 5099 - Rear Sway Bar Bushings
- 4 - 8062 - End link Bushing
- 4 - 15.10.202.39 - .625ODx .393IDx .940L Center Sleeves
- 1 - 9.11102 - 10 Gram Tube of Formula 5 Prelube
- 1 - 17086 Instruction sheet
add_shopping_cart Suggested Parts 1keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
Polyurethane.
Price: $12.80
Warranty: Lifetime Warranty
These sway bar bushings were designed to work with your OE hardware to save you money. Once installed, tighten them on using the OE bracket and bolts to get a cost-effective upgrade!
Energy Suspension 11.5103
OE Rubber Issues
Has your Mazda Miata lost some of its handlings recently? It's also started swaying more than usual after taking a corner I'll bet. These are two of the symptoms for failed sway bar bushings. The OE sway bar bushings installed on your Miata are made of a soft rubber that is prone to stretching. After stretching and relaxing over and over it begins to crack and rot away, leaving your sway bar loose. This results in the sway bar swinging around pointlessly, worse, it can bang into other chassis parts, potentially causing even more damage. Before this happens to you, check out what DST has to offer!
HyperFlex Polyurethane Upgrade!
This is Energy Suspension's 11.5103, a set of 12.5mm rear sway bar bushings. Crafted using Energy Suspension's HyperFlex polyurethane these bushings can withstand any stress your suspension can put on them. Sway bar bushings are made to grip the sway bar and hold it firmly to the frame. Energy Suspension's Hyperflex sway bar bushings not only accomplish that but thanks to Energy's design they also make your sway bar perform like an even larger bar!
Easy and Cost-Effective Install!
These sway bar bushings were designed to work with your OE hardware to save you money. Once installed, tighten them on using the OE bracket and bolts to get a cost-effective upgrade! The 11.5103 also comes with a set of new end-link bushings in case you need little added security for your sway bar. Here at DST, we make sure to let everyone know it is crucial that you measure your sway bar before you purchase bushings for it. That way you can be sure you got the correct size. For more information on measuring your sway bar check out our How-To Video on our universal sway bar bushings page!
Product Reviews for 11.5103 | Sway Bar and Endlink Bushings 12.5 mm | Miata 90-97
- 5 Star (2)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 11.5103
starstarstarstarstar" Great Kit! Great Price! "
Great kit, Great price, Fast delivery too. Tried pressing out the old end link bushings but resorted to a hole saw that just ripped through the old bushings and left a small amount to scrape away. Pressed the new bushings in with a bench vise!
verified_user Verified Buyer - David A Garner - . Energy Suspension 11.5103 - 5 out of 5starstarstarstarstar" Outstanding "
I have used Energy Suspension parts before on my Datsun 240Z Race Car...and they perform flawlessly. I see no reason to expect any less from the parts I've installed on my Mazda Miata. An inexpensive and easy upgrade that I highly recommend.
verified_user Verified Buyer - David R. Morreale - . Energy Suspension 11.5103 - 5 out of 5
