Motor Mount Inserts - Nissan Sentra - Prothane 14501

  • 14501 360image 1
  • 14501 Motor Mount Inserts - Driver or Rear
  • 14501 Motor Mount Inserts - Driver or Rear
  • 14501 Motor Mount Inserts - Driver or Rear
  • 14501 Motor Mount Inserts - Driver or Rear
  • 14501 360image large 1

Motor Mount Inserts - Driver or Rear

Manufacturer: Prothane
Part Number: 14501

:(?)
Black
Red
Price: $21.00

check_box In Stock check_box Ships Immediately


  • 1 of Metal Sleeves - 60872 (3/4 X .406 ID X 2.350 inches)
  • 1 of Engine Mount Insert - 69126
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
FitmentMotor Mount Inserts - Driver or Rear 14501 fits these vehicles:

Motor Mount Inserts - Nissan Sentra - Prothane 14501

Prothane Motor Mount Inserts

Prothane's motor mount inserts are crafted out of polyurethane, a material much more durable than rubber that can handle intense weight, heat, and pressure. Designed to fill the voids built into your OE motor mounts, these inserts will drastically increase the power transfer efficiency from your engine to the wheels. Since the voids were initially put there to reduce NVH, it stands to reason that filling in those voids will have the opposite effect. Installing Prothane's motor mount inserts may increase your NVH, but the increase to overall performance is worth it to some drivers. To top it all off, Prothane's motor mount inserts are covered by a lifetime warranty handled in-house here at DST.

Prothane Motor Mount Inserts Box
Prothane Motor Mount Inserts

OE Motor Mounts

OE motor mounts are usually made out of metal with holes strategically placed to keep most of the engine's vibrations from traveling to the cab. While the OE mounts are decent for the daily driver, the weekend warrior or straight up racer will probably look for an upgrade. Prothane's Polyurethane motor mount inserts offer a great performance boost equal to that of a solid motor mount, without the higher cost.

Prothane 14501

Product Reviews for Motor Mount Inserts - Nissan Sentra - Prothane 14501

5 Star (4)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Prothane 14501

5 out of 5 based on 4 user reviews. Write a Review

N
verified_user

starstarstarstarstar" Perfect!!! "

It is what exactly I needed for my car!\nStiffness on the gear change without powerloss at all!!\n\nEasy to fit without any knowledge of mechanic.\n\nThank you very much!!

verified_user Verified Buyer - - . Prothane 14501 - 5 out of 5
Y
verified_user

starstarstarstarstar" Good "

You may have to burn the rubber out leaving the metal sleeve inside the mounts frame. I had to do this. If it does not fit cut out the metal sleeve and try pressing it in again. this is for right side transmission side

verified_user Verified Buyer - - . Prothane 14501 - 5 out of 5
P
verified_user

starstarstarstarstar" great "

Very good product. The shifter works great now. No more 1st gear problem. Installation was a little bit complicated but not impossible. Thanks for the product.

verified_user Verified Buyer - - . Prothane 14501 - 5 out of 5
J
verified_user

starstarstarstarstar" Great Part "

Great quality part. Fit perfect.

verified_user Verified Buyer - - . Prothane 14501 - 5 out of 5