• 191142 Universal Sway Bar Bushings - 26mm (1.02 inch)- B

Universal Sway Bar Bushings - 26mm (1.02 inch)- B

Part Number: 191142
Manufacturer: Prothane
Rating 9

Options


Black
Red
Price: $14.37

In Stock Ships Immediately


 
Footnotes


 
Alternate Part Numbers for 191142
  • 19-1142-BL
  • 19-1142
  • 19-1142BL
  • 19-1142
  • 191142BL
  • 191142

Prothane 191142

Product Reviews for 191142

Prothane 191142



5 out of 5 based on 9 user reviews. Write a Review

Made a big difference to my handling.
5 out of 5 - very good guality
Wayne Morris - . Prothane 191142
Rears went on without an issue. The fronts needed very minor bracket modifications. Mount holes needed slight enlargement and shavedo a fraction of urethane off in order to ease the installation. Brackets are beefier than stock. Urethane material is superior to stock. My Mazdaspeed3 now handles fantastic.\nhighly recommend these bushings.
5 out of 5 - excellent parts.
Loren McGrew - . Prothane 191142
Worked great for 10 months and 15,000 miles. Now they are pretty worn and Im somewhat disappointed. I expected longer life out of this product.
2 out of 5 - Review 1 Year Later
Mark Stitt - . Prothane 191142
Made a big difference to my handling.
5 out of 5 - very good guality
Wayne Morris - . Prothane 191142
Bushing and bracket are considerably "beefier" than the stock front sway bar bushings on my 08 Mazdaspeed 3. Being "universal" replacements, I expected they would need some modification to fit correctly and had to grind the bolt holes to expand them about 1/8" to properly fit them with the stock bolt holes. Difficulty and time to install was about a 2.5-3 on a 1-10 scale. Car handles a great deal better and fixed my clunking problem! Well worth the money and time, great product.
5 out of 5 - Very solid and quality construction
Brian Scott - . Prothane 191142
I had to slide the rings on my MS3s front swaybar a bit inwards to allow for the increased width of these over stock, but that was easily done with a prybar. Overall, they work fine and are cheap! No problems, solved my clunking issue.
5 out of 5 - Fine. Does the job.
William Erikson - . Prothane 191142
I have a Mazdaspeed 3. The only dimension on these parts that match the original part is the I.D. of the hole at 26mm. The rest are all about 1/3 larger. The material is stiffer than stock by a lot. The rings around the stock sway bar are so close to the bolt holes that the new brackets have to be modified with a slot in the side. Washers have to be used to make up for the small bolt head. This job is not easy, but when complete, the car drives like never before. They are quiet and strong.
5 out of 5 - The reward is worth the effort.
Timothy Tardiff - . Prothane 191142
Quick delivery and great quality. Made big change in handling :)
5 out of 5 - Great product
Krzysztof Wrzosek - . Prothane 191142
The OEM bushings on the front sway bar of my 2007 Mazdaspeed3 started to go around 40,000. By 60,000 the clunk at low speeds over bumps was pretty bad. Since I installed these the car is silent and handling seems to have tightened up a bit as well. Thanks!
5 out of 5 - Great improvement on Mazdaspeed3
Jon - . Prothane 191142