• 2.1104 Motor Mounts - 6 Cyl Models Only
  • 2.1104 Motor Mounts - 6 Cyl Models Only
  • 2.1104 Motor Mounts - 6 Cyl Models Only
  • 2.1104 Motor Mounts - 6 Cyl Models Only

Motor Mounts - 6 Cyl Models Only

Part Number: 2.1104
Manufacturer: Energy Suspension
Rating 10


Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $49.19

In Stock Ships Immediately

Polyurethane Motor Mount
A true performance application component for cars, trucks, hot rods and racing/competition vehicles, yet designed to be also used for street vehicles!

Motor Mount | 88-06 Jeep Wrangler | Energy Suspension

Includes a Matching Pair of Mounts
Polyurethane Motor Mount
  • A true performance application component for cars, trucks, hot rods and racing and competition vehicles yet designed to be also used for street vehicles!
  • Assemble to the chassis the same way as OEM parts.
  • Soft enough to absorb vibrations for street use yet rugged for racing use.
  • When required a torque resistant "safety interlock" design is used that is comparable in strength to those too hard running metal mounts!
  • Replaces the original, short lived and typically too soft rubber mounts and outdates those hard running metal motor mounts.
  • Made of HYPERFLEX performance polyurethane.
  • Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
  • One Set Will Cover the Left and Right Side



 energy logoEnergy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Alternate Part Numbers for 2.1104
  • ENE-2.1104G
  • ENE-2.1104R
  • ENS-2-1104G
  • ENS-2-1104R
  • 21104G
  • 21104R

Energy Suspension 2.1104

Product Reviews for Motor Mount 2.1104

Energy Suspension 2.1104

5 out of 5 based on 10 user reviews. Write a Review

The only issue we had was that I think one of the brackets was warped because we had a hell of a time trying to get one side to fit.
5 out of 5 - allot better then stock
Mario Salcido - . Energy Suspension 2.1104
Once installed the mounts are great! Takes some work and customizing to get to fit. Great mounts.
5 out of 5 - nice product!
Jeff White - . Energy Suspension 2.1104
I mounted these in my jeep yj 1987 4.2 l they fit like a glove, taking the old mounts apart was pretty easy.I used a hack saw to cut the old rubber away from the original mount then the rest with a Stanley knife. There is only one thing about the inserts, that would be the engine vibration when idling but the rest is bang on perfect. Also i was under the impression that this would only fit the wrangler tj but that's not the case they fit my yj 1987. TIP Have a friend around to help it make it much easier
5 out of 5 - nice and tight just how it should be
lee brugmans - . Energy Suspension 2.1104
I ordered these mounts for my 98 XJ Cherokee to aid in motor stability and to prevent damage to my new exhaust manifold/header which I installed at the same time. I knew that these mounts did not come with the steel surrounds, and that I would have to use the factory surrounds. I ran into two issues with these mounts during installation. First, on one of the mounts, the steel sleeve within the poly was too long and did not fit into the mount slot on my Jeep. I quickly ground it down about 1/32" no big deal. Second, these are molded correctly on the top with a tight fit on the surrounds but are not molded correctly on the bottom. These are molded flat, and do not compensate for a slight crown on the factory surrounds/plate where the surrounds are pressed. It was a pain to install, as they were really tight and the fit was less than perfect. Now that they're installed, I have no complaints. The motor does not move in the engine bay and the exhaust manifold does not flex a bit when the throttle is applied (which is exactly what I wanted). I'm happy with them now, but would be happier if they came with new steel surrounds. It would have saved a lot of time and swear words.
4 out of 5 - Quality Materials, but not the most user friendly.
Evan Welke - . Energy Suspension 2.1104
I was looking for something a bit better than stock replacement, didn't shake the Cherokee at idle, and didn't brake the bank. I looked at the other replacements like Brown Dog and M.O.R.E. For almost 1/2 the price of the BD and M.O.R.E. and about the same as a quality replacements I got these. These take a bit more time to install as you have to pull the old mounts apart and install these poly mounts inside. Cutting the old rubber off the lower metal shells with a Sawzall and wire brushing the rest of the old rubber off is a little time consuming. I used a cheapy stainless steel wire cup brush from Harbor Freight and my trusty plug in drill. A fully charged 14V drill got me about 1/2 way through 1 lower metal shell trying to get the old rubber off I had to cut a slot on the new mounts for them to fit flush with the lower metal shells as my factory ones had a welded stud with a head it. Overall, I am very satisfied with this product. The Cherokee vibrates a little more than stock at idle in park, but cruising down the road I don't even notice it. Remember, the black ones are graphite impregnated the red ones are not.
5 out of 5 - So far, a Great product.
Mark Carlson - . Energy Suspension 2.1104
Kinda a pain to assemble, but with the use of a torch the old rubber came right out.
4 out of 5 - Worked Great
sean st.amand - . Energy Suspension 2.1104
What a difference over the OE mounts. Bit of hassle using the the original shells but worth the effort
5 out of 5
ron davies - . Energy Suspension 2.1104
I have just installed the new poly motor mounts and they are so much better than stock. The only complaint that I have is that you are required to reuse the surrounding metal parts from the OEM mounts. It seems to me that for just a few more dollars you could offer the same mounts with the metal brackets included.
4 out of 5
Benjamin Parcell - . Energy Suspension 2.1104
Easy to install if you know your way around the engine bay. Nice tight fit into the bracket, engine has no vibration at all now. Thanks.
5 out of 5 - Nice tight fit, Easy to install.
Dean Middleton - . Energy Suspension 2.1104
I didn't know when ordering that I would have to re-utilize the old steel frame mounts and that required cutting the old rubber out of mounts. Otherwise, I'm very happy with the mounts and for that matter all the energy suspension parts Ive used in the past.
5 out of 5 - Great fit
Terry Fraser - . Energy Suspension 2.1104