• 3.5213 Front Sway Bar Bushings and End Links - 36mm (1.41 inch)
  • 3.5213 Front Sway Bar Bushings and End Links - 36mm (1.41 inch)

Front Sway Bar Bushings and End Links - 36mm (1.41 inch)

Part Number: 3.5213
Manufacturer: Energy Suspension
Rating 32


Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $37.87

In Stock Ships Immediately

Polyurethane Front Sway Bar and Endlink Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

Front Sway Bar Bushings and End Links - Chevy Silverado

Only Fits 36mm Bar
Polyurethane Front Sway Bar and Endlink Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.
Energy Suspension Front Sway Bar Bushings and end links offer the greatest improvement in handling performance of any of the products Energy Suspension offers. Energy Suspension Sway Bar Bushings and Sway Bar Endlinks cause the OE bar to perform like a more expensive, higher diameter sway bar. Economy, increased efficiency, and easy installation are among the reasons these products are so popular.
Energy Suspension Sway Bar Bushings

  • 2 - 5356 Greaseable Sway Bar Bushings - 36mm (1-3/8")
  • 2 - Outer Brackets with Zerk Grease Fitting (for 5356)
  • 4 - Mounting Washers for Brackets
  • 2 - Complete Endlinks with 4-1/4" Center Spacer
  • 1 - 9.11108 Formula 5 Prelube Tube


 energy logoEnergy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Alternate Part Numbers for 3.5213
  • ENE-3.5213G
  • ENE-3.5213R
  • ENS-3-5213G
  • ENS-3-5213R
  • 35213G
  • 35213R

Energy Suspension 3.5213

Product Reviews for Front Sway Bar Bushings 3.5213

Energy Suspension 3.5213

5 out of 5 based on 32 user reviews. Write a Review

Holding up great and make for better handling instantly.
5 out of 5 - Review 2 Years Later
Valentin Trejo - . Energy Suspension 3.5213
Working as advertised. I think that its commendable that you contact the purchaser just prior to the end of the warranty period. It shows great faith in your product. 5 stars++++
5 out of 5 - Review 2 Years Later
John Dardis - . Energy Suspension 3.5213
Awesome parts
5 out of 5 - Review 2 Years Later
Donald G. Rives - . Energy Suspension 3.5213
Parts are great, have functioned extremely well and in fact, my intensions are to order more suspension parts in the near future. Thank you for following up--John Sherman
5 out of 5 - Review 1 Year Later
john sherman - . Energy Suspension 3.5213
No problems so far. They went on easy and perform great. Having zerks fittings on the center links will make keeping them greased so much easier.
5 out of 5 - Review 2 Years Later
Wayne Zarichniak - . Energy Suspension 3.5213
Only complaint is i had to put the brackets in a vice and compress them down to line up with the holes in the truck frame. I guess its just to much to ask for them to fit right out of the box.
4 out of 5 - seems like good quality parts.
William N Bomar - . Energy Suspension 3.5213
Although I did not use the end links, they look great, the bushings are awesome, so easy to install
5 out of 5 - Awesome
charles nelson - . Energy Suspension 3.5213
Working great good item an quality , will recommend
5 out of 5 - Review 1 Year Later
Roger Huitt jr - . Energy Suspension 3.5213
Got this kit to install along with a new lift kit I installed on my Chevy 2500hd, good fit and finish, better design than the worn out OEM parts I pulled off, and the red bushings look pretty trick when installed. Overall I would defiantly buy this kit again.
5 out of 5 - Nice product
Joshua Vitt - . Energy Suspension 3.5213
Installed my front sway bar bushing and end link set today. An easy install which took about 1 hour. The install is pretty straight forward however the instruction sheet is a little confusing regarding the "small washer". All in all I like the polyurethane bushing set better than the stock bushings.
5 out of 5 - Excellent!!!
Danny Roth - . Energy Suspension 3.5213
Great stuff THANK YOU
5 out of 5 - Review 1 Year Later
graeme stewart - . Energy Suspension 3.5213
great product, much better than stock, great improvement.
5 out of 5 - Review 1 Year Later
Harold R Hughes - . Energy Suspension 3.5213
The sway bar bushings and end links made a huge difference in the way the truck handles. The old ones were worn out and werent doing much good for a truck that has a leveling kit on the front and a 1" block in the back. Im very impressed and happy with the product and customer service. I needed a replacement sway bar bushing due to a packaging error. It showed up promptly within a week. Very happy with the service!
5 out of 5 - Great!
Carl G Gayhart - . Energy Suspension 3.5213
I installed these components on a 2003 Silverado that is used as a weekend warrior "race truck". I have nothing negative to say about the sway bar mounts/bushings. I am running a Belltech 1.375" front sway bar and these mounts bolt in flawlessly also being grease-able is ideal for removing the dreaded poly bushing "squeak". As far as the end links, I was unable to use them since I have an aftermarket lower control arm w/ aftermarket front sway bar. It places the bar ends too high. This may work great on a stock front suspension, but I couldn’t tell you. I ended up using a different bolt and trimming the sleeve to make it fit correctly. This is expected with me once aftermarket components are installed, angles and gaps change. You can also use these end link bushings so for your shock mount. ;-)\n\nOverall great product! Nice and beefy! Oh yeah, one more thing... mine did not come with the grease packet, so make sure you have an extra tub ready! ;-)\n
5 out of 5 - Excellent quality and great product
AARON SCHWARTZ - . Energy Suspension 3.5213
Product was well designed and a breeze to install
5 out of 5 - Great product
Paulo Ibanez - . Energy Suspension 3.5213
Good solid product. Urethane bushing are very durable and were of quality manufacturing. Installation was a breeze for this part, take out the old and replace with the new. Instructions are pretty easy to follow but just looking under your truck you can probably figure it out easy. Nice to have the extra lube points now and havent noticed any squeaking that most complain about with urethane bushings. No noticeable stability improvements but I sure there is somewhere, but great add-on if its time for replacement.
5 out of 5 - Good Product
Henry Forcadilla - . Energy Suspension 3.5213
Excellent product.
5 out of 5 - Excellent product.
Larry Bunch - . Energy Suspension 3.5213
put kit # 3.5213 on my 02 1500 2wd silverado, what a great product! went on very smoothly! handeling and ride are awesome! great price and real quality parts ! this is a must have !
5 out of 5 - Great !
george weed - . Energy Suspension 3.5213
Simple installation, exact fit for my 2005 Silverado 2500 HD. Grease fittings in the bushing work great. One of the least costly changes to make for improved handling. Total install time about 45 minutes.
5 out of 5 - Much better than original equipment.
Henry Colangelo - . Energy Suspension 3.5213
Made my 99 Sierra drive like it is a new truck!
5 out of 5 - Great
Michael Grout - . Energy Suspension 3.5213
The new bushings and links improve handling considerably, I'm very pleased with the end result. My Silverado is lowered, so I had to cut the spacers and install shorter bolts, but installation was quick and easy. I also like having the ability to grease the sway bar bushings.
5 out of 5 - Excellent Quality Parts
Robert Dawson - . Energy Suspension 3.5213
This was the first time I installed end links and sway bar bushings. It honestly took me longer to read the instructions and get the torque specs right that it did to remove the old parts and install the new ones. The ride is now much smoother as such more comfortable. Great product, simple install and great price!
5 out of 5 - Great product...
Karim T. - . Energy Suspension 3.5213
Already in and work just fine.
5 out of 5 - Good stuff
Dennis E Gapinski - . Energy Suspension 3.5213
The quality and fit of the components exceeded my expectations. The extended sway bar links were necessary due to a heavy duty tie rod upgrade but gave me better handling and a tighter front end as well. The zerk fittings on the mounts will make for extended use and abuse. Much better quality than OEM and a great price.
5 out of 5 - Excellent Quality and Fit
Kent Andrew Landreth - . Energy Suspension 3.5213
Great product, was very impressed with the quality at the price, highly recommend, and even better everything bolted right up.
5 out of 5 - Great product
Trent Schickel - . Energy Suspension 3.5213
Easy to install, stronger and better design than stock. Really helped to quiet down my front end.
5 out of 5 - Great product.
matthew blatz - . Energy Suspension 3.5213
This has been the best upgrade I have done. My truck handles better than it did when it was new and I highly recommend. I honestly did not think that sway bar bushings alone would make such a huge difference
5 out of 5 - Best upgrade for the money
Bert Craven - . Energy Suspension 3.5213
I didn't realize there was such a difference in rubber and polyurethane bushings. My truck handles better than new!!!!
5 out of 5 - Great investment!!!!!!
Michael Gibbs - . Energy Suspension 3.5213
Everything installed perfectly, no problems highly recommended.
5 out of 5 - great parts and fair price
Anthony Cabrera - . Energy Suspension 3.5213
The sway bar bushing and link kit installed easy and I had no alignment issues. The bushings were split and a gap of about 1/4 inch was there on both sides after tightening. The gap closed almost all the way within a few days of driving. The handling results were worth the price and effort to install. I am very happy overall.
5 out of 5 - very satisfied
Robert W. Stamm - . Energy Suspension 3.5213
Priced right and better than stock. The added zerk fittings are also nice. I used them with the front control arm set as well. Side to side sway is diminished considerably.
5 out of 5 - A+
julius long - . Energy Suspension 3.5213
Parts installed just like factory parts! Truck corners flat and tight feels like I installed a bigger sway-bar and all I did was installed ENERGY SUSPENSION BUSHINGS. A night and day difference from the sloppy factory ones!!! GREAT PARTS FROM GREAT PEOPLE!!!! Thanks for your awesome service!! Melissa P.
5 out of 5 - A night and day difference from the sloppy factory ones!!!
Melissa Powers - . Energy Suspension 3.5213