Rear Strut Arm Bushings - Chevrolet Corvette - 3.7108

  • 3.7108 360image 1
  • 3.7108 Rear Strut Rod Bushings
  • 3.7108 Rear Strut Rod Bushings
  • 3.7108 Rear Strut Rod Bushings
  • 3.7108 Rear Strut Rod Bushings
  • 3.7108 Rear Strut Rod Bushings
  • 3.7108 360image large 1

Rear Strut Rod Bushings

Manufacturer: Energy Suspension
Part Number: 3.7108

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $37.16

check_box In Stock check_box Ships Immediately


Suggested part for 3.7108: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

Suggested part for 3.7108: 9.11104
9.11104 Formula 5 Prelube - 8oz. Tub Polyurethane Bushing Grease
8 ounce tub of High Performance Grease by Energy

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 3.7108 to 71205
Prothane 71205
Polyurethane.
Price: $18.22
Warranty: Lifetime Warranty

FitmentRear Strut Rod Bushings 3.7108 fits these vehicles:
Details
Polyurethane Rear Strut Rod Bushings
Energy's strut rod bushings help control unwanted steering axis changes, diminishing wheel hop and reducing traction loss.

Rear Strut Arm Bushings - Chevrolet Corvette - 3.7108

Polyurethane Rear Strut Rod Bushings
  • These performance polyurethane components help reduce common wheel "roll under". This occurs when stopping abruptly, especially when using performance tires. For both front of rear drive vehicles is so equipped.
  • Replaces that original, short lived and too soft O.E.M. rubber.
  • On front wheel drive vehicles it diminishes wheel hop and traction loss during standing start accelerations.
  • Better maintains proper alignment under extreme conditions.
  • Made of Energy's HYPERFLEX performance polyurethane to add performance and durability.
Footnotes
  • Must Reuse All Metal Parts
  • Fits GM 14048947(LH) and 14048948 (RH) Arms (strut eyes same size on each end)
  • One Set Will Cover the Left and Right Side

Energy Suspension Strut Arm Bushings

Strengthening Driver Control

Designed to increase driver control while braking or accelerating, strut arms secure your control arm to the chassis. Strut arm bushings protect the connections between the strut arm, the control arm, and the chassis. It's incredibly important to keep these connections in pristine condition, otherwise you'll undoubtedly start encountering handling issues at times when driver control is most vital.

Energy Suspension Strut Arm Bushings box
Energy Suspension Strut Arm Bushings

Upgrading Dependability and Longevity

The OE strut arm bushings installed on your vehicle are made of soft rubber. this rubber is prone to stretching, cracking, and rotting away. Energy Suspension offers their Hyperflex polyurethane bushings as a substantial upgrade over the OE rubber. Easily capable of resisting road contamination and physical wear, Energy's strut arm bushings will securely strengthen your strut arm and enhance your control. To top it off Energy Suspension covers their strut arm bushings with a two-year warranty handled in-house here at DST.

Energy Suspension 3.7108

Product Reviews for Rear Strut Arm Bushings - Chevrolet Corvette - 3.7108

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 3.7108

5 out of 5 based on 2 user reviews. Write a Review

B
verified_user

starstarstarstarstar" Perfect "

High quality, easy to install parts.

verified_user Verified Buyer - - . Energy Suspension 3.7108 - 5 out of 5
G
verified_user

starstarstarstarstar" Fit well after modification "

The bushings were too wide. Had to sand the insides down by about 1/16" each side. They barely fit when dry, but with the grease there is no room between the halves for the grease squeeze out. I'd recommend that the mold for this product be re-tooled and made to be about 1/16 less in depth per side.

verified_user Verified Buyer - - . Energy Suspension 3.7108 - 5 out of 5

compare_arrows Compare with Similar Parts


This Part
3.7108 compare
$37.16
Prothane
Prothane compare
$18.22
($18.94) cheaper

question_answer Customer Questions and Answers


Question:
Why does it say in your instructions for part number 3.7108 to reuse all metal parts? In the kits you only supply 2 of the Metal Sleeves. I need the other two for my application. Do you offer these?
Answer:
No, we do not offer the sleeves for part number 3.7108. You will have to reuse your oem sleeves.

Question:
Do I need to reuse my stock sleeves for the 3.7108?
Answer:
Yes, you will need to reuse the stock sleeves on the kit 3.7108.

Question:
When you say re use all metal parts, what do you mean?
Answer:
You will have to reuse your inner sleeves for part number 71205.