• 4.1123 Motor Mount Inserts
  • 4.1123 Motor Mount Inserts
  • 4.1123 Motor Mount Inserts
  • 4.1123 Motor Mount Inserts

Motor Mount Inserts

Part Number: 4.1123
Manufacturer: Energy Suspension
Rating 21


Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $21.19

In Stock Ships Immediately

Performance Polyurethane Motor Mount Inserts
Under High Performance Conditions, they Reduce Wheel Hop and Torque Induced Movement that can actually damage vehicle components.

FORD Focus Motor Mount Inserts | Lower Torque Position

Fits the Front Lower Torque Position Only
Performance Polyurethane Motor Mount Inserts
  • Performance Polyurethane Motor Inserts
  • Available for many popular sporty and performance front wheel drive vehicles.
  • A real must to use for sport compact competition and performance uses.
  • Reduces wheel hop and traction loss.
  • Prevents damage to other vehicle components.
  • Improves and even restores broken motor mounts.
  • Made of Energy's HYPER FLEX performance polyurethane.
  • No Footnotes From Energy Suspension
Energy Suspension Motor Mount Inserts both restore worn mounts and reduce unwanted motor movement. Under high performance conditions, Energy Suspension Motor Mount Inserts reduce wheel hop and torque induced movement that can actually damage vehicle components. These polyurethane inserts are thoroughly tested to add support and stability to the OE motor mount design.

  • Helps reduce wheel hop and traction loss.
  • Prevents damage to other vehicle components.
  • Improves and even restores broken motor mounts.
  • Made of HYPER-FLEX performance polyurethane.
  • Resistant to under vehicle fluids: oils, coolants, road contaminants.
Energy Suspension Motor Mount Inserts

  • 1 - 1131 - (small bushing in Lower Torque Mount)
  • 1 - 1132 - (large bushing in Lower Torque Mount)
  • 1 - Center Metal Sleeve for 1131
  • 1 - Center Metal Sleeve for 1132
  • 1 - Installation Instructions # 17352

Alternate Part Numbers for 4.1123
  • ENE-4.1123G
  • ENE-4.1123R
  • ENS-4-1123G
  • ENS-4-1123R
  • 41123G
  • 41123R

Energy Suspension 4.1123

Product Reviews for Motor Mount Inserts 4.1123

Energy Suspension 4.1123

5 out of 5 based on 21 user reviews. Write a Review

Overall is a great product was kinda hard getting factory part out to install the new one once done worked great. Highly recommend for anyone with a ford focus.
5 out of 5 - great product
Michael Ivey - . Energy Suspension 4.1123
Parts are working great! Engine purrs like a kitten now and I dont even feel it inside the car!!!\n\nThanks
5 out of 5 - Review 1 Year Later
Scott Pucker - . Energy Suspension 4.1123
The stock ford mount lasted about 9 years, and a replacement one from RockAuto only lasted about 9 months. Installation of these was easy, getting the larger bushing steel part out of the old mount is the hardest part. I used a chisel to knock the edge in toward the center, then used a straight punch, and a large socket with a 2.74" OD and held the mount gently in a bench vice to eventually knock it out of there. A press would be better, a local auto shop might even do it for free. New bushings slipped right in, I used my vice to cram in the small one as it was very tight. A slight bit more vibration at idle, but the clunking is gone and the these mounts look and feel like they would last forever.
5 out of 5 - Excellent
John Allen - . Energy Suspension 4.1123
Parts were easy to insert into the stock dogbone and fit perfect. These parts are very effective as far as transfer of power to the road. Very sleight vibration after putting parts on, but not objectionable and I expected much more. Overall very effective and a steal for the price and effort needed to install. NOTE: Do not grease the parts to aid in installation. The instructions warn against it and you should heed their warning. Doing so will reduce the performance.
5 out of 5 - great part, perfect for my car
Gary Hogarth - . Energy Suspension 4.1123
Shipped quickly & securely. Removed my motor mount, took it and new bushings down to local gas station, where they pressed them in. It was very easy and I did an oil change while underneath my vehicle, the whole job took less than an hour.
5 out of 5 - Great part, perfect fit.
SLDGHMR - . Energy Suspension 4.1123
The hardest part of the installation was removing the old rubber from the aluminum casting. The rubber was molding into the casting and took a little bit of effort to remove. Time will tell how long this repair will last.
5 out of 5 - Very pleased with this product.
Bruce Bishop - . Energy Suspension 4.1123
The rubber OEM mounts and aftermarket copies tend to rip apart. These polyurethane ones don't have that issue. Easy to install and eliminates clunks when shifting (manual trans). Best of all its cheaper than buying a new mount.
5 out of 5 - Better than rubber
Hiroki Hirata - . Energy Suspension 4.1123
After installing a new throttle body and K&N filter, the little woman quickly destroyed the stock mount. Installed these in about 30 minutes (I used a vice to install the inserts)and the difference is amazing. Firmer hook up, shifts feel better and the clunking is gone. Not feeling more vibration than normal,so that's good. Super quick shipping and I'm a happy customer.
5 out of 5 - Excellent Upgrade
PJFoltz - . Energy Suspension 4.1123
Once the old bushes are removed the new ones are moderately easy to fit using a vice, because these are dry fit bushes it does help to use a bit of spit to get them started. Total fitting time on the driveway using basic tools and some axle stands was under 45 minutes. There is a noticeable difference in engine vibrations into the cabin when starting from cold on fast idle, also when revving the engine between 800 & 1500rpm without load. The power transfer and initial throttle response when accelerating & changing gear makes the extra vibrations a small trade off in the overall driving experience. For half the price of replacing the torque damper with a genuine Ford part you'd be foolish not to go for this set.
4 out of 5 - Big positives out weigh the small negatives
James Kirby - . Energy Suspension 4.1123
Ive used this same mount 7 years ago and it lasted 6 years before finally wearing out. I hands down recommend these bushing inserts over any mount on the market.
5 out of 5 - Excellent!
Paul Vadon - . Energy Suspension 4.1123
I went through 3 sets of transmission torque mounts from a national parts chain before finding out about these. These inserts are definitely of the highest quality and do their job well. No more broken mounts. Every great once in a while I can feel the car shake a tad bit more than normal at idle, but that's to be expected when using a solid mount. My car is daily driven with a 5 speed manual transmission. Last but not least, these inserts are really easy to install. I used a propane torch and screw driver to get all the old rubber out, and a rubber mallet to pressŁ the new inserts in. Don't hesitate, great product!
5 out of 5 - Excellent product
Logan - . Energy Suspension 4.1123
These bushings are easy to assemble into your old mount and does not add any harshness to your ride quality. You just cannot imagine how well these work!
5 out of 5 - A+
Vincent Kish - . Energy Suspension 4.1123
Everything was pretty straight forward knock out the old bushings and stick in the new. No you don't need a press just a rubber hammer and they go right in. It's a great add to your vehicle. It does not get rid of vibration in the car if your looking for that you need to replace the other two mounts and there will be no more vibrations. Trust me I know. Over all these bushing are great for the price and make a big difference in motor shift.
5 out of 5 - Very good product and made big difference in motor shift.
Michael Federico - . Energy Suspension 4.1123
My specific application is the Torque Strut Mount on a 2001 Ford Focus ZX3. The good: Hands down better that the part from Anchor that lasted less that a week. Engine movement is much better managed. The nasty clunk is GONE. I thought my clutch was going because the engine was bouncing around so much. I couldn't modulate the clutch unless I completely babied the starts and low speed shifting. All those problems disappeared as well. The bad: If your engine is running rough at idle like mine is at the moment, you will feel plenty of vibration. It all goes away at speed. On the other hand, if your engine is just starting to have issues you may well be aware of them much sooner. This could be a very good thing. Other: Very handy if you have a press to remove the old bushings from the dog-bone. You will not need a press to install the new inserts. A large rubber mallet is handy for getting the large bushing completely inserted. I lubed the small one lightly to install but NOT the large one. I did lube the frame mount to ease the installation into the car. It is nowhere near as flexible as the stock link so installing is a bit of a challenge. MUCH better if you can get the car on a lift. I did mine on the ground. Be sure to mount the dog-bone to the mounting bracket and install them as a unit. I tried to leave the bracket on the engine and then install the dog-bone but that would have been impossible without removing the other motor mounts. Also, don't mount the engine bracket backwards to the dog-bone. You will not have anything nice to say if you do. You might try marking the engine bracket for direction before pulling it out from under the car. Well worth the time and effort.
5 out of 5 - Major Impovement
Robert and Christina Hathaway - . Energy Suspension 4.1123
Perfect fit. Easy to install. I am sure these will last longer than OEM.
5 out of 5
Bryan Reyes - . Energy Suspension 4.1123
Installed the part, it was a bit messy getting the old bushing out, as I had to burn the rubber with a torch and scrape out the char a little at a time. Well worth the work though, as my shifts are perfect...no more slamming driveline every time I shift, and I don't drive my car hard!!! Overall, I spent about two hours working on the torque strut mount, most of it removing the old bushing as I said; only took 10 minutes to remove the torque mount, 10 minutes to install the new bushings (after removing the old rubber), and another 10 minutes re-installing torque strut. A most definite improvement and a recommended purchase for any ford focus. Looking at buying a bushing set for my wife's Suzuki Forenza too...
5 out of 5 - Perfect product.
Steven Anthony Pratt - . Energy Suspension 4.1123
An easy install and the improvement in shifts is definitely noticeable. Well worth it.
5 out of 5 - Great product performance and easy install
brandon flesher - . Energy Suspension 4.1123
I was able to install this part in a short amount of time. It was super easy and worth every penny. It was easy to notice smoother shifts, and slightly more power to the ground, due to reduced engine movement. A++++ product and I plan to purchase from again for the rest of my bushing needs.
5 out of 5 - Great product with a noticable difference!
Nolan Brown - . Energy Suspension 4.1123
I was originally going to purchase the Prothane inserts, but I found out the Energy Suspension model is an updated, better design. Removing the stock bushings and inserting the new can be difficult, so be patient! The results are worth the trouble though. This helped firm up my shifts, without causing any extra vibration. Price and shipping was great, I will be doing business with you again! Thanks and God bless! -Ryan
5 out of 5 - Great value, great service!
Ryan - . Energy Suspension 4.1123
A picture of this part installed in the end part would also be nice. I actually thought it was the other - impossible to find, upper transmission mount. Still, planned on replacing the lower one as well, so all good here. Also - it does cause car to shake - I had a tuner, so increasing idle RPM to 1000 got rid of all of that. Make sure you mention that. Also don't forget to mention that although your part will fit into the dogbone nice and easy - the bolts on the old 2001 ford focus will break, and cause much pain to all.
5 out of 5 - the part did fit but...
Andrew Dowling - . Energy Suspension 4.1123
They were fairly easy to install. All I had was 2 sockets and a bench vice, but it worked well. Got rid of the weird vibrations I was having from the broken stock soft plastic and rubber bushing.
5 out of 5 - Very Solid
Andrew Liebhard - . Energy Suspension 4.1123