5.5142 | Front Sway Bar-Endlink Bushings - 23.81 mm | Ford E250

  • 5.5142 360image 1
  • 5.5142 Front Sway Bar Bushings - 23.81mm (0.93 Inch)
  • 5.5142 Front Sway Bar Bushings - 23.81mm (0.93 Inch)
  • 5.5142 Front Sway Bar Bushings - 23.81mm (0.93 Inch)
  • 5.5142 Front Sway Bar Bushings - 23.81mm (0.93 Inch)
  • 5.5142 Front Sway Bar Bushings - 23.81mm (0.93 Inch)
  • 5.5142 360image large 1

Front Sway Bar Bushings - 23.81mm (0.93 Inch)

Manufacturer: Energy Suspension
Part Number: 5.5142

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $31.04

check_box In Stock check_box Ships Immediately


  • 2 of 5474 - Front Sway Bar Bushing, 15/16"
  • 2 of 8192 - Radius Arm Link Bushing
  • 4 of 4806 - End Link Grommet
  • 4 of 15.03.01.39 - 1.250 X 3.85 X .110", Dished Washer
  • 2 of 9.11108 - Grease
  • 1 of 17039 - Installation Instructions
Suggested part for 5.5142: dll124
dll124 Front Sway Bar Lateral Locks - 23-24mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.

Suggested part for 5.5142: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
3 - 5ML High Performance Grease by Energy

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 5.5142 to 41116
Prothane 41116
Polyurethane.
Price: $17.97
Warranty: Lifetime Warranty

FitmentFront Sway Bar Bushings - 23.81mm (0.93 Inch) 5.5142 fits these vehicles:
Details
Polyurethane Front Sway Bar Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

5.5142 | Front Sway Bar-Endlink Bushings - 23.81 mm | Ford E250

Only Fits 15/16 inch Bar
Polyurethane Front Sway Bar Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.

Energy Suspension Sway Bar Bushings

Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Energy Sway Bar Bushing
Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Be sure to use Formula 5

The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif

compare_arrows Compare with Similar Parts


This Part
5.5142 compare
$31.04
  • star_borderstar_borderstar_borderstar_borderstar_border
  • This part
  • Bushing Material: Polyurethane
Prothane
Prothane compare
$17.97
($13.07) cheaper
  • star_borderstar_borderstar_borderstar_borderstar_border
  • Bushing Material: Polyurethane

question_answer Customer Questions and Answers


Question:
Will part number 5.5142 fit my 1975 charger?
Answer:
Yes, part number 5.5142 will fit the 1975 charger.