Replacement Ball Joint Dust Boots, Polyurethane 9.13130

  • 9.13130 360image 1
  • 9.13130 Front Ball Joint Dust Boots
  • 9.13130 Front Ball Joint Dust Boots
  • 9.13130 Front Ball Joint Dust Boots
  • 9.13130 Front Ball Joint Dust Boots
  • 9.13130 Front Ball Joint Dust Boots
  • 9.13130 360image large 1

Front Ball Joint Dust Boots

Manufacturer: Energy Suspension
Part Number: 9.13130

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $5.02

check_box In Stock check_box Ships Immediately


  • 2 - 13009 - Front Ball Joint Dust Boot
  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
FitmentFront Ball Joint Dust Boots 9.13130 fits these vehicles:
Details
Polyurethane Front Ball Joint Dust Boots
Finally, someone has made a replacement ball joint dust boot! No more expenseor cost worries when the boot wears out or is damaged either from installation or from day to day use.

Replacement Ball Joint Dust Boots, Polyurethane 9.13130

Pin Opening Diameter Base Opening Diameter Height of Boot Piece Number
18.55mm (0.73 inch) 41.25mm (1.625 inch) 27.75mm (1.092 inch) 13009
Here is our complete list of universal dust boots.
Polyurethane Front Ball Joint Dust Boots
  • Repair torn and worn out ball joint boots without having to buy the entire ball joint just to get the boot.
  • Adds both durability and that custom look attention custom show car builders!
  • Lasts longer, seals better and looks great for show vehicles!
  • Resist damage from rocks, sand, water, road salt, and oils better than many other O.E.M. rubber boots.
  • Made of Energy's HYPER FLEX performance polyurethane for added performance and durability.
Footnotes
  • Includes 2 Boots Per Package.

Energy Suspension Polyurethane Universal Dust Boots

Importance of Dust Boots

Many of you are finding out that the rubber boot on your ball joint or tie rod has rotted away or has split. These boots are extremely important for the suspension of your vehicle. Fortunately, Energy Suspension makes Universal Dust boots that will fit most vehicles. These dust boots are made of polyurethane and are far more durable than rubber. This will seal your boot to retain the grease in the joint, as well as protecting the joint from dirt, sand, water, and snow.

Energy Suspension Universal Dust Boots
Energy Suspension Universal Dust Boots

How to get your measurements

In order to select the proper boot, you will first need to grab a few measurements. The best way to do this is with a set of digital calipers. You will need to measure the diameter of the base where the boot will sit, the diameter of the shaft (also called the Pin Opening Diameter) and the height of the boot. Once you have gotten to your tie rod end measure these three spots. Be sure to be as exact as possible and to write down your measurements. If you have any trouble getting these measurements, give our customer service team at DST a call.

It is important to note that you do not want to choose a boot that is bigger than your measurements. You want to choose a boot that is just slightly smaller than the measurements you obtained. The elasticity of the polyurethane will allow the hole to stretch and grip the joint tightly. If you choose a boot that is too large there will be a gap which lets in debris.

Now that you have these measurements, you can verify that this is the boot that you need. If you find that your measurements do not match this boot, go to our Universal Dust Boot page to match a part to your measurements.

Choose your design

Energy Suspension offers an alternative to the traditional round bushing. There is an octagon shaped dust boot available as an option. The octagonal boots have the same specifications and perform the exact thing. They just offer a more unique look.

Energy Suspension Universal Dust Boots
Energy Suspension 9.13130

Product Reviews for Replacement Ball Joint Dust Boots, Polyurethane 9.13130

5 Star (21)
88%
4 Star (3)
12%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 9.13130

5 out of 5 based on 24 user reviews. Write a Review

P
verified_user

starstarstarstarstar" These are OK once the ball joint is tightened down. "

Its better than throwing away a perfectly good ball joint because it has a torn boot. Maybe not 100% waterproof so not recommneded for off road / river crossing.

verified_user Verified Buyer - - . Energy Suspension 9.13130 - 5 out of 5
J
verified_user

starstarstarstarstar" They fit better then factory ones "

I would buy these again. Saved me from buying the complete joint.

verified_user Verified Buyer - - . Energy Suspension 9.13130 - 5 out of 5
G
verified_user

starstarstarstarstar" Good quality, perfect fit on my 99 SC300 "

I needed some new ball joint boots for my 99 SC300 when I changed the LCA bushing on it & saw one was torn. Toyota doesnt sell the ball joint boot itself for the SC300s only the whole arms, so I hopped on the forums & found these to be a perfect fit & they were. Fit great & seals completely. Happy with this product.

verified_user Verified Buyer - - . Energy Suspension 9.13130 - 5 out of 5
M
verified_user

starstarstarstarstar" Review 1 Year Later "

These are quality ball joint boots. Super simple to install and a much more durable product than the OEM boots. Im very satisfied with the purchase process and the product.

verified_user Verified Buyer - - . Energy Suspension 9.13130 - 5 out of 5

Fitment for 9.13130

question_answer Customer Questions and Answers


Question:
Will these fit on a 2004 Ford Explorer front upper ball joint?
Answer:
No these only show to fit the Ford Mustang and Ford Thunderbird, the others are Chevy Camaro and Dodge

Question:
Will the 9.13130 dust boots fit on a 66 Cadillac Deville?
Answer:
Unfortunately the 9.13130 is not fitted as a direct fit for your 66 Cadillac Deville.

Question:
Will part 9.13130 fit my 1999 ford mustang gt lower ball joint?
Answer:
Yes, Part Number 9.13130 will fit your 1999 Ford Mustang GT lower ball joints.

Question:
Will this part 9.13130 fit my 95 Honda Prelude?
Answer:
Unfortunately, with universals, we cannot guarantee fitment for these parts. If you need to cut or mold these parts to the exact measurements you are needing you can. However, you will be unable to return them.

Question:
Will the part 9.13130 fit my 2004 AWD Dodge Durango?
Answer:
No, part number 9.13130 will not fit the 2004 Dodge Durango awd.

Question:
Do you ship to the UK?
Answer:
Yes we do ship to the UK.