• 9.5111 Universal Sway Bar Bushings 1-1/16 inch (27mm)
  • 9.5111 Universal Sway Bar Bushings 1-1/16 inch (27mm)
  • 9.5111 Universal Sway Bar Bushings 1-1/16 inch (27mm)
  • 9.5111 Universal Sway Bar Bushings 1-1/16 inch (27mm)

Universal Sway Bar Bushings 1-1/16 inch (27mm)

Part Number: 9.5111
Manufacturer: Energy Suspension
Rating 4


Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $16.78

In Stock Ships Immediately

Universal Sway Bar Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

Dimensions 'A' = 1-1/16 inch (27mm)
(see picture below)

Universal Sway Bar Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.


  • 2 - Sway Bar Bushings (one for each side of the vehicle)
  • 2 - Outer Brackets (one for each side of the vehicle)
  • 1 - 6 gram Grease Packet

Alternate Part Numbers for 9.5111
  • ENE-9.5111G
  • ENE-9.5111R
  • ENS-9-5111G
  • ENS-9-5111R
  • 95111G
  • 95111R

Energy Suspension 9.5111

Product Reviews for 9.5111

Energy Suspension 9.5111

5 out of 5 based on 4 user reviews. Write a Review

My 2004 4x4 Crew Cab Tundra front sway bar takes a 27mm Sway Bar Bushing. Everybody list as an exact fit either a 24mm or a 28mm bushing. So I had to go with a universal fit Bushing #9.5111, 27mm. Work just fine with no problems. Make sure when purchasing bushings to measure your sway bar. They have a lot of really good info at this vendor on making a purchase. They are first rate.
5 out of 5 - Parts arrived fast and was exactly what I needed.
Everett D Edlin - . Energy Suspension 9.5111
My 2006 Cadillac CTS-V had a very annoying rattle in the front end which I isolated to the front sway bar bushings. I purchased the car at 53,000 miles and it rattled then. I believe the factory bushings were over-sized for the bar as they shouldn't wear out in that short time unless your'e racing it. Using the measuring gauge I found on the Energy Suspension website, I determined what I hoped was the correct bar diameter and found the corresponding bushings at a very reasonable price. Since they are not a direct replacement for the factory parts, I used a 1.5" spacer under one side with an M14 X 1.5 60mm bolt. THEY WORK BEAUTIFULLY! They eliminated the rattle and the car handles perfectly. Thanks!
5 out of 5 - Excellent Part
Roy Milne - . Energy Suspension 9.5111
The bushings fit perfectly. They firmed up my cornering considerably. The included instructions were a little hazy, but installation of these parts is so simple that if you need instructions, you shouldn't be working on your car, anyways. The only problems I had with them were that the slots for the bolts were a little too wide, making it easy for the provided washers to slip into them if mounted even a little bit off-center, and that the tabs were just a bit too long at the top, so I had to wedge them in a bit. Other than that, excellent service, excellent delivery times, excellent product!
5 out of 5 - Positive.
Robert Heins - . Energy Suspension 9.5111
The parts were excellent quality and fit. The only problem was trying to get out 1 of the bolts. Fortunately I changed them with a friend who is a mechanic. Under normal circumstances it would have been no problem
5 out of 5 - very good quality
Jr Phillips - . Energy Suspension 9.5111