unarchive In The Box of 9.5126_rear keyboard_arrow_down
- 2 - Sway Bar Bushings (one for each side of the vehicle)
- 2 - Outer Brackets (one for each side of the vehicle)
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 9.5126_rear | Rear Sway Bar Bushings - 22mm | Acura Integra 97-01
- 5 Star (3)
-
-
- 50%
-
- 4 Star (1)
-
-
- 17%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (2)
-
-
- 33%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 9.5126_rear
starstarstar_borderstar_borderstar_border" Review 2 Years Later "
Its not a bolt on, Ive tried putting it on but the brackets dont match up with the bolt holes. Editors Note: When choosing universal sway bar bushing it is important to measure the diameter of the bar and the center to center spacing where the bushing is attached to the frame to insure fitment.
verified_user Verified Buyer - Matteo Wise - . Energy Suspension 9.5126_rear - 2 out of 5starstarstarstarstar" Review 2 Years Later "
Had them on for two year, 20.000km and have seen several trackdays. Theyre still in very good condition, thumbs up!
verified_user Verified Buyer - martin jänicke - . Energy Suspension 9.5126_rear - 5 out of 5starstarstar_borderstar_borderstar_border" Dissapointed "
I got these brackets with bushings but they didnt fit my sway bar. The bracket was too small but for right size bar. It is made good, but problem was the size of bracket.
verified_user Verified Buyer - Leonardo D. Rocha - . Energy Suspension 9.5126_rear - 2 out of 5starstarstarstarstar" Works Great "
Fits the ITR rear sway bar perfectly. Best chassis upgrade so far.
verified_user Verified Buyer - Zack Finger - . Energy Suspension 9.5126_rear - 5 out of 5