• 9.5160 Universal - Greaseable Sway Bar Bushings - 24mm (0.94 inch)
  • 9.5160 Universal - Greaseable Sway Bar Bushings - 24mm (0.94 inch)
  • 9.5160 Universal - Greaseable Sway Bar Bushings - 24mm (0.94 inch)
  • 9.5160 Universal - Greaseable Sway Bar Bushings - 24mm (0.94 inch)

Universal - Greaseable Sway Bar Bushings - 24mm (0.94 inch)

Part Number: 9.5160
Manufacturer: Energy Suspension
Rating 37

Options


Black
Red
Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $16.73

In Stock Ships Immediately


 
Details
Universal Sway Bar Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

Universal Sway Bar Bushings - 24mm | Energy Suspension

Dimensions 'A' = 15/16 in / 24mm
(see picture below)

Universal Sway Bar Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.
Footnotes

 

  • 2 - Sway Bar Bushings - Greaseable - (one for each side of the vehicle)
  • 2 - Outer Brackets with Zerk Fitting for Greasing -  (one for each side of the vehicle)


 energy logoEnergy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Alternate Part Numbers for 9.5160
  • ENE-9.5160G
  • ENE-9.5160R
  • ENS-9-5160G
  • ENS-9-5160R
  • 95160G
  • 95160R

Energy Suspension 9.5160

Product Reviews for 9.5160

Energy Suspension 9.5160



5 out of 5 based on 37 user reviews. Write a Review

Had these installed on my 2007 Jeep Patriot. These are great bushings. My jeep is quiet again. These were actually a better deal than the cheesy OEM rubber bushings that came from the factory. Those rubber bushings were making one heck of a noise. Highly recommend for any Patriot owner. Dont go stock!
5 out of 5 - Great parts. So quiet
Todd Skelton - . Energy Suspension 9.5160
Installed these bushes&brackets in place of factory bushes(rubber)/brackets in 2004 SAAB 9-3 Linear with 24mm stabilizer bar. Install was done at service center, as getting to bushes unfortunately requires partially lowering front sub-frame. Silicone paste used liberally by mechanic to minimize noise from/maximize life of bushes. Three years later, bushes are still, structurally, in almost like new condition. However, theyve grown to be very noisy in any temperature. In an effort to correct this, six months ago, went to the service center to have them removed, cleaned and re-greased. Simply using a grease gun to add more grease via the zirk fitting is useless, seeing noise is coming from all the dirt trapped between bush and stabilizer bar and possibly other sources such as scratched inner surface of bush which therefore no longer rotates smoothly around anti-roll bar surface. Technicians efforts had minimal results, with most of the noise returning soon after. However, bushes continue to be structurally sound and perform their job of holding the anti-roll bar very well. If not for the noise, I would give these bushes a firm 5/5. Still, they are superior to the factory bushes, which make heaps of noise and mostly disintegrate in as little as 2 years after installation.Editors note; It is very important to use the correct grease with poly urethane bushings. energy recommends their Formula 5 grease. It is formulated for these type of bushings.
5 out of 5 - Review 2 Years Later
Mikey - . Energy Suspension 9.5160
Good quality and complete as shown.
5 out of 5 - Very Nice Product.
Raul Espino - . Energy Suspension 9.5160
Got rid of the clunking sound when going over uneven surface
5 out of 5 - Fit perfectly on my 06 HHR
Jon Aichele - . Energy Suspension 9.5160
These are awesome. My car still has the nice tight ride it had when we first put them in two years ago. No complaints whatsoever. Handling is exceptional. Ive heard reviews of people having squeaking but I have had none.
5 out of 5 - Review 2 Years Later
KIM ALEXANDER - . Energy Suspension 9.5160
Had these installed on my 2007 Jeep Patriot. These are great bushings. My jeep is quiet again. These were actually a better deal than the cheesy OEM rubber bushings that came from the factory. Those rubber bushings were making one heck of a noise. Highly recommend for any Patriot owner. Dont go stock!
5 out of 5 - Great parts. So quiet
Todd Skelton - . Energy Suspension 9.5160
No more squeak.
5 out of 5 - works as intended.
jonathon chapman - . Energy Suspension 9.5160
The sway bar bushing kit works really well. I replaced the old bushings with these and I am very happy with the product. Easy to install and love the fact they are greasable!
5 out of 5 - Great quality
Matthew Harris - . Energy Suspension 9.5160
The parts were installed by my preferred mechanical technician and they fitted the car perfectly. It got rid of that annoying noise from the old sway bar bushings from the original manufacturer. Thanks again. p.s. the parts were delivered on time.
2 out of 5 - perfect
Robert Gauvreau - . Energy Suspension 9.5160
I used these bushings for my 1992 Toyota Supra, with the ST rear anti-sway bar. The fit is good for the bushings themselves, but had to drill the bracket out a little more to fit better though. I was a little disappointed that there was no lubrication provided.
4 out of 5 - Good
Brenden Knigge - . Energy Suspension 9.5160
I have a 2008 Jeep Patriot and these sway bar bushings did the trick. Very nice quality and being able to lube it is a plus. Just have to be careful when lubing and removing the lube hose from the zerk fitting.
5 out of 5 - Excellent!
Alex Yapjoco - . Energy Suspension 9.5160
Had these installed on my 2007 Jeep Patriot. These are great bushings. My jeep is quiet again. These were actually a better deal than the cheesy OEM rubber bushings that came from the factory. Those rubber bushings were making one heck of a noise. Highly recommend for any Patriot owner. Dont go stock!
5 out of 5 - Great parts. So quiet
Todd Skelton - . Energy Suspension 9.5160
No more squeak.
5 out of 5 - works as intended.
jonathon chapman - . Energy Suspension 9.5160
The parts were installed by my preferred mechanical technician and they fitted the car perfectly. It got rid of that annoying noise from the old sway bar bushings from the original manufacturer. Thanks again. p.s. the parts were delivered on time.
5 out of 5 - perfect
Robert Gauvreau - . Energy Suspension 9.5160
I am extremely pleased with the my whole experience. It was the easiest shopping I have ever done and my parts came 2 days before I expected. Thanks again.
5 out of 5 - excellent...
Eric Bates - . Energy Suspension 9.5160
Well made bushings and strong brackets. Didn't fit my 98 Chevy Tracker exactly. Brackets are a bit too large, but with just a few tweaks you can get them to fit. They are so much stronger and work much more smoothly than the stock bushings it isn't even comparable. Wonderful product.
5 out of 5 - Beats the heck out if stock.
Mark Tomon - . Energy Suspension 9.5160
Parts were bought for the front of my Jeep Patriot. Ordered them from the U.S.A because nothing was available in the U.K. Parts were dispatched almost immediately and received a few days later. The fitting was easy and they have certainly made a difference, looks ill have to replace the rear bushings next!
5 out of 5 - Very good
mike peace - . Energy Suspension 9.5160
The sway bar bushing kit works really well. I replaced the old bushings with these and I am very happy with the product. Easy to install and love the fact they are greasable!
5 out of 5 - Great quality
Matthew Harris - . Energy Suspension 9.5160
Purchased these to replace my mushroomed-out OEM front bushings on my Jeep Patriot. Clear and concise instructions, fit perfectly and a noticeable difference in ride quality. I used a marine water-resistant grease to lubricate them. Definitely recommended.
5 out of 5 - Excellent upgrade.
Darren Murphy - . Energy Suspension 9.5160
A good for the valueproduct. Easy fit and perfect match.
5 out of 5 - fast delivery and a nice fit.
Tommy Andersson - . Energy Suspension 9.5160
The part itself is good. <br />
5 out of 5 - Good Product
Geoff Nace - . Energy Suspension 9.5160
The parts arrived very promptly and appeared to be of good quality materials. I did feel the need to call the manufacturer, as the grease hole feature in the polyurethane bushing was not open all the way through. They suggested gently working a drill bit through the material, which was easy to do by hand. In all likelihood the pressure of grease coming through the fitting may have pushed its way through the material anyway. Installation was easy enough (with the right tools). Time will tell how they hold up - certainly will do better than the stock OEM soft bushings I removed.
5 out of 5 - Very good product and good customer service.
Steven Jenson - . Energy Suspension 9.5160
Perfect direct replacement for Mazdaspeed6 FSB bushings and brackets. Much higher quality than the stock parts, and the split is better located on the front side rather than the stock bushing location on the bottom center which allows frame contact when stock rubber bushings get old and soft. No modification of the new bracket was required. Great stuff and would use again with high confidence.
5 out of 5 - Perfect direct replacement for Mazdaspeed6 FSB
TiGraySpeed6 - . Energy Suspension 9.5160
Installed on my 90 mx6 gt and made a great deal of difference from the worn out stock ones. Great product fast shipping! A lot less body roll.
5 out of 5 - Great Product
Peter Beaudin - . Energy Suspension 9.5160
Installed on 2006 Chevrolet HHR and great improvement- no more knocking from front suspension!
5 out of 5 - Good Quality Investment.
JOSEPH JONES - . Energy Suspension 9.5160
I put these bushings in my 06 chevy HHR and the car rides great. No more clunking noise from the stock bushings.
5 out of 5 - great fit
joe - . Energy Suspension 9.5160
I installed these on my 2007 Jeep Patriot. These are much higher quality over the original OEM parts, including the original rubber bushings and the metal brackets.
5 out of 5 - Great Product-better than OEM
Thomas - . Energy Suspension 9.5160
Easy to install, greaseable, silent...overall a great product!
5 out of 5 - Great Bushings!
Andrew Matheson - . Energy Suspension 9.5160
Installed on my 08 Patriot. Jeep handles and rides now the way it should have from the factory. Very satisfied with the quality of the part and the service from energy suspensions. Barry Kempt Head Nova Scotia.
5 out of 5 - Very good
Barry Campbell - . Energy Suspension 9.5160
Installed on 2005 Altima Nismo sway bars- This product does improve handling and the zerk fittings are a great selling point. There might be a need to do some simple modification on the bracket to insure a good fit but hey it's a universal part so it should be expected.
5 out of 5 - Recommended
Jordan Rein - . Energy Suspension 9.5160
I replaced the original bushings on a 2006 Chevy HHR with your product. It made the noise or clunking go away and after several months they are working as intended. GREAT PRODUCT AT A GREAT PRICE. thanks
5 out of 5
Gerald Bilger - . Energy Suspension 9.5160
Worked great, solved my problems a+ thank you
5 out of 5
luis a calo - . Energy Suspension 9.5160
Brackets do not match, must grind (elongate) mount holes
5 out of 5 - better handling
thom - . Energy Suspension 9.5160
We have installed these on our HHR. Two sets of factory ones since we purchased car in May 2008. Hope these will last longer. I did change the straight grease zerts to 90 degree ones so they would be easier to lube on this vehicle.
5 out of 5 - great
Dennis Robson - . Energy Suspension 9.5160
Fit and installed perfectly.
5 out of 5 - Very Nice Part
Dave Haylett - . Energy Suspension 9.5160
After finally getting the right size and having a garage install them we were not impressed with the metal mounting brackets that seemed 2 be too short for the bushings. We had to shim them with washers so that they could be tightened. i did notice a considerable difference in handling on my 98 Nissan Frontier.
4 out of 5 - Could be better, but works for Nissan Frontier
brent luce - . Energy Suspension 9.5160
Good handling characteristics experienced over OEM rubber type.. I have pushed these bushing to the limit and they have definitely helped me maintain absolute stability around corners particularly on uneven roads in Trinidad...best product!!! 2004 Mitsubishi Lancer 1.6 (4g18) engine
5 out of 5 - 24mm Part Number: 9.5160 front sway bar bushings
Carolyn Joseph - . Energy Suspension 9.5160