moog-512357 | Rear Wheel Hub Assembly | 00-07 Chevrolet Monte Carlo

  • moog-512357 Rear Wheel Bearing and Hub Assembly
  • moog-512357 Rear Wheel Bearing and Hub Assembly
  • moog-512357 Rear Wheel Bearing and Hub Assembly
  • moog-512357 Rear Wheel Bearing and Hub Assembly

Rear Wheel Bearing and Hub Assembly

Manufacturer: MOOG
Part Number: moog-512357
Price: $163.40

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentRear Wheel Bearing and Hub Assembly moog-512357 fits these vehicles:
Details

moog-512357 | Rear Wheel Hub Assembly | 00-07 Chevrolet Monte Carlo

2005 Buick Allure, 2004-2005 Buick Century, 2005 Buick LaCrosse, 2003-2004 Buick Regal, 2000-2005 Chevrolet Impala, 2003-2005 Chevrolet Monte Carlo, 2003-2008 Pontiac Grand Prix
  • Fits vehicles with 4-wheel ABS
2006-2007 Buick Allure
  • Fits vehicles with 4-wheel ABS
2005 Buick Terraza, 2005 Chevrolet Uplander
  • Fits FWD vehicles with 4 hole rectangular flange
  • For FWD vehicles with 3 hole triangular flange use 512246
2006-2008 Chevrolet Impala, 2006-2007 Chevrolet Monte Carlo
  • Fits vehicles with 4-wheel ABS
2002-2004 Chevroelt Venture, 2002-2004 Oldsmobile Silhouette, 2001 Pontiac Montana 2001-2005 Pontiac Aztec
  • Fits FWD vehicles with 4-wheel ABS
2002-2003 Pontiac Montana
  • Fits FWD vehicles with rear drum brakes
2004 Pontiac Montana
  • Fits FWD vehicles with rear drum brakes and rear disc brakes
  • 2005 Pontiac Montana
    • Fits FWD submodel: Base with 4 hole rectangular flange
    • For FWD submodel: SV6 with 3 hole triangular flange use 512246
    • For AWD submodel: SV6 use 513179
    2005 Saturn Relay
    • Fits FWD vehicles with 4 hole rectangular flange
    • For FWD vehicles with 3 hole triangular flange use 512246

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts.

Moog Wheel Bearing and Hub Assemblies

Don't Live With All of Those Noises

Wishing you could get rid of that annoying grinding noise? You've probably been hearing it for a while, and the mechanic just said your wheel bearing and hub assembly needs replacing. Take it from the DST parts experts, go with a premium solution: Moog's wheel bearing and hub assemblies.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

OE Design Flaws

The OE design of wheel bearing and hub assemblies is shoddy at best. Common symptoms of a failed OE wheel hub are:

  • Loose wheels leaning into the vehicle
  • Premature tire wear and poor handling
  • Snapping or clicking noise on turns
  • Humming or rattling when driving straight
  • Anti-lock Braking System (ABS) light is on

If you are experiencing any of these issues, get your vehicle checked out immediately.

Roll Form Design

All of Moog's Wheel Hub Assemblies are engineered to target these OE problems. One such feature is Moog's innovative roll form design. Moog's roll form design ensures consistent and optimal pre-load in your hub. With grease now equally spreading throughout the hub, the longevity of your wheel bearing and hub assembly increases greatly.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

ABS Molded Shield and Socket Connections

Moog's wheel bearing and hubs also feature an ABS with molded shield and socket connections. This provides maximum defense against contamination. With this addition, Moog's hubs are much more resistant to the premature wear that plagues OE hub assemblies.

Moog Abrasion-Resistant ABS Cord

Moog wheel hub assemblies include an ABS cord coated with a blended material designed to provide superior ABS protection. This helps increase abrasion resistance and protects against adverse conditions. Unlike the OE ABS cords, Moog's cords will last longer and resist cuts or rips much better than the OE design.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Quad Lip Seal Design

Moog's hub assemblies come equipped with a quad lip seal design. The design provides a securely-sealed environment that the OE design doesn't have. This, yet again, makes Moog's hubs more resistant to contamination, which will help extend the life of the part.

Precision Match Components

When you buy a Moog wheel hub assembly from our warehouse in Stephenville, you can be assured that the components are precision matched. Moog sees to this by strictly controlling the manufacturing process to ensure exact matching of bearings and rolling elements, delivering superior performance and minimizing noise and vibration.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Coated Wheel Stud Bolts

The wheel studs on Moog hub assemblies feature a protective coating that helps prevent rust and corrosion. The protective coating will allow easier removal and proper torquing of the wheel, cutting down on installation time and any future servicing that you might have.

Parts Engineered to the Highest of Standards

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts. Moog hub assemblies are performance-proven, quality-tested, and are available for many vehicles, both foreign and domestic. If that wasn't enough, Moog's wheel bearing and hub assemblies also come with a 3-year warranty that, if you should ever need it. If you need a little help finding a Moog wheel hub assembly for your vehicle then don't hesitate to call DST's customer service team, they'll be happy to help you with anything you may need.

Moog wheel bearing and hub assembly
Fitment for moog-512357
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
BuickAllure2009-2005Rear Quantity 2
BuickCentury2005-1994Rear Quantity 2
BuickLaCrosse2009-2005Rear Quantity 2
BuickRegal2004-1997Rear Quantity 2
BuickTerraza2005RearFWD Quantity 2
ChevroletImpala2013-2000Rear Quantity 2
ChevroletImpala Limited2016-2014Rear Quantity 2
ChevroletLumina APV1996-1992Rear Quantity 2
ChevroletMonte Carlo2007-2000Rear Quantity 2
ChevroletUplander2005RearFWD Quantity 2
ChevroletVenture2005-1997Rear Quantity 2
ChevroletVenture2004-2002RearFWD Quantity 2
OldsmobileCutlass Ciera1996-1994Rear Quantity 2
OldsmobileCutlass Cruiser1994Rear Quantity 2
OldsmobileIntrigue2002-1998Rear Quantity 2
OldsmobileSilhouette2004-2002RearFWD Quantity 2
OldsmobileSilhouette2001-1992Rear Quantity 2
PontiacAztek2005-2001RearFWD Quantity 2
PontiacGrand Prix2008-1997Rear Quantity 2
PontiacMontana2005-2001RearFWD Quantity 2
PontiacMontana2000-1999Rear Quantity 2
PontiacTrans Sport1999-1992Rear Quantity 2
SaturnRelay2005RearFWD Quantity 2