moog-515021 | Front Wheel Hub Assembly | 99-01 Ford F-250 Super Duty

  • moog-515021 Front Wheel Bearing and Hub Assembly - Non-ABS
  • moog-515021 Front Wheel Bearing and Hub Assembly - Non-ABS
  • moog-515021 Front Wheel Bearing and Hub Assembly - Non-ABS
  • moog-515021 Front Wheel Bearing and Hub Assembly - Non-ABS

Front Wheel Bearing and Hub Assembly - Non-ABS

Manufacturer: MOOG
Part Number: moog-515021
Price: $355.88

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Wheel Bearing and Hub Assembly - Non-ABS moog-515021 fits these vehicles:
Details

moog-515021 | Front Wheel Hub Assembly | 99-01 Ford F-250 Super Duty

1999 Ford F-250 Super Duty and 1999 Ford F-350 Super Duty
  • Fits 4WD vehicles with 2-wheel ABS, 13mm thick hub flange, without dual rear wheels, and made from 03/08/1999
  • For 4WD vehicles with 2-wheel ABS, 10mm thick hub flange, without dual rear wheels, and made though 03/10/1999 use 515076
  • For 4WD vehicles with 4-wheel ABS, 60.5mm length, without dual rear wheels, 13mm thick hub flange, and made from 03/08/1999 use 515020
  • For 4WD vehicles with 4-wheel ABS, 10mm thick hub flange, with dual rear wheels, and made through 03/20/1999 use 515077
  • For 4WD vehicles with 4-wheel ABS, 10mm thick hub flange, without dual rear wheels, and made through 03/10/1999 use 515075
  • For 4WD vehicles with 4-wheel ABS, with dual rear wheels, 45.7mm length, 13mm thick hub flange, and made from 03/08/1999 use 515057
  • For RWD vehicles use 515100
2000-2001 Ford F-250 Super Duty and 2000-2001 Ford F-350 Super Duty
  • Fits 4WD vehicles with 2-wheel ABS and without dual rear wheels
  • For 4WD vehicles with 4-wheel ABS, 60.5mm length, and without dual rear wheels use 515020
  • For 4WD vehicles with 4-wheel ABS, with dual rear wheels, 45.7mm length, and 14mm-2.00mm coarse thread use 515057
  • For RWD vehicles use 515100

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts.

Moog Wheel Bearing and Hub Assemblies

Don't Live With All of Those Noises

Wishing you could get rid of that annoying grinding noise? You've probably been hearing it for a while, and the mechanic just said your wheel bearing and hub assembly needs replacing. Take it from the DST parts experts, go with a premium solution: Moog's wheel bearing and hub assemblies.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

OE Design Flaws

The OE design of wheel bearing and hub assemblies is shoddy at best. Common symptoms of a failed OE wheel hub are:

  • Loose wheels leaning into the vehicle
  • Premature tire wear and poor handling
  • Snapping or clicking noise on turns
  • Humming or rattling when driving straight
  • Anti-lock Braking System (ABS) light is on

If you are experiencing any of these issues, get your vehicle checked out immediately.

Roll Form Design

All of Moog's Wheel Hub Assemblies are engineered to target these OE problems. One such feature is Moog's innovative roll form design. Moog's roll form design ensures consistent and optimal pre-load in your hub. With grease now equally spreading throughout the hub, the longevity of your wheel bearing and hub assembly increases greatly.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

ABS Molded Shield and Socket Connections

Moog's wheel bearing and hubs also feature an ABS with molded shield and socket connections. This provides maximum defense against contamination. With this addition, Moog's hubs are much more resistant to the premature wear that plagues OE hub assemblies.

Moog Abrasion-Resistant ABS Cord

Moog wheel hub assemblies include an ABS cord coated with a blended material designed to provide superior ABS protection. This helps increase abrasion resistance and protects against adverse conditions. Unlike the OE ABS cords, Moog's cords will last longer and resist cuts or rips much better than the OE design.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Quad Lip Seal Design

Moog's hub assemblies come equipped with a quad lip seal design. The design provides a securely-sealed environment that the OE design doesn't have. This, yet again, makes Moog's hubs more resistant to contamination, which will help extend the life of the part.

Precision Match Components

When you buy a Moog wheel hub assembly from our warehouse in Stephenville, you can be assured that the components are precision matched. Moog sees to this by strictly controlling the manufacturing process to ensure exact matching of bearings and rolling elements, delivering superior performance and minimizing noise and vibration.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Coated Wheel Stud Bolts

The wheel studs on Moog hub assemblies feature a protective coating that helps prevent rust and corrosion. The protective coating will allow easier removal and proper torquing of the wheel, cutting down on installation time and any future servicing that you might have.

Parts Engineered to the Highest of Standards

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts. Moog hub assemblies are performance-proven, quality-tested, and are available for many vehicles, both foreign and domestic. If that wasn't enough, Moog's wheel bearing and hub assemblies also come with a 3-year warranty that, if you should ever need it. If you need a little help finding a Moog wheel hub assembly for your vehicle then don't hesitate to call DST's customer service team, they'll be happy to help you with anything you may need.

Moog wheel bearing and hub assembly
Fitment for moog-515021
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordF-250 Super Duty2001-1999Front4WD Quantity 2
FordF-350 Super Duty2001-1999Front4WD Quantity 2

question_answer Customer Questions and Answers


Question:
Will part number 515021 fit the RWD on my 2000 F250?
Answer:
For the 2000 F250, part number 515021 will only fit the 4wd.

Question:
Is part number 515021 sold as a pair or individually?
Answer:
Part number 515021 is sold individually.

Question:
Will this hub assembly fit?
Answer:
The hub assembly 515021 will not fit your Super Duty.