MOOG 6312 Front Coil Springs - Pair

  • moog-6312 Front Coil Springs - Pair

Front Coil Springs - Pair

Manufacturer: MOOG
Part Number: moog-6312
Price: $121.44

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Coil Springs - Pair moog-6312 fits these vehicles:

Moog's Coil Springs

Designed to be more than OE replacements, Moog's coil springs come with a variety of shapes and ends. This selection, combined with Moog's lifetime warranty handled right here at DST, lends security to whichever choice you might make. While they are certainly higher quality than the OE springs, each of Moog's coil springs were designed to still have the same spring rate. Having the same spring rate allows for an easier install and a more accurate restoration for your vehicle's ride.

End Type

Coil Springs have three types of ends: Square, Tangential and Pigtail. It is important that you select a coil spring that matches BOTH your end types, otherwise the coil spring won't fit. Your OE coil spring could have the same type ends, or a combination of both.

Moog Universal Coil Springs Squared

Type 1: Squared

With a Squared end, the final coil is bent back to touch the coil before it. The easiest way to know if you have a squared end is to stand the coil spring straight up. A squared end will let the spring sit flat on the ground and stay standing.

Type 2: Tangential

A Tangential end looks like it would just keep on going forever if the spring continued. The last coil is not bent back and it is not the pigtail (see below). Instead, the tangential coil spring looks as though a normal coil was just cut, otherwise, it would have kept winding on forever. If you tried to stand it up straight, it would fall.

Moog Universal Coil Springs Squared
Moog Universal Coil Springs Squared

Type 3: Pigtail

The Pigtail is probably the easiest to identify. Its defining characteristic is the pig tail shape at the end. The final coil is squared off, but is a much smaller diameter than the rest of the spring.

Spring Type

Moog offers two types of springs for a universal fitment: Constant Rate and Variable Rate.

Constant Rate

Moog Constant Rate coil springs return your vehicle to the original specifications. The rate at which the spring compresses and rebounds remains constant regardless of the amount of load on the spring. These coil springs are heat treated, have a weather resistant finish and use a urethane protective tube.

Moog Universal Coil Springs Bar Diameter
Moog Universal Coil Springs Bar Diameter

Variable Rate

Moog Variable Rate coil springs can be used as an original replacement or an upgrade to carry heavier loads. The resistance changes as the spring compresses, becoming progressively stiffer as the load on the springs increase. The springs include a "comfort range" with tightly spaced coils to give a smooth ride, and include a "load range" with widely spaced coils to minimize deflection and maintain chassis height when the vehicle load increases.

Fitment for moog-6312
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
BuickApollo1974-1973Front Quantity 1 5.7L V8 350cid
ChevroletCamaro1969Front Quantity 1 3.8L L6 230cid
ChevroletCamaro1969Front Quantity 1 4.1L L6 250cid
ChevroletCamaro1969Front Quantity 1 4.1L L6 4097cc/250cid
ChevroletCamaro1969Front Quantity 1 4.1L L6 4098cc/250cid
ChevroletCamaro1969Front Quantity 1 5.0L V8 307cid
ChevroletCamaro1968-1967Front Quantity 1 5.3L V8 5358cc/327cid
ChevroletCamaro1968Front Quantity 1 5.4L V8 327cid
ChevroletCamaro1968Front Quantity 1 5.7L V8 350cid
ChevroletCamaro1967Front Quantity 1 3.8L L6 3769cc/230cid
ChevroletCamaro1967Front Quantity 1 5.7L V8 5736cc/350cid
ChevroletChevy II1968Front Quantity 1 5.3L V8 5358cc/327cid
ChevroletChevy II1968Front Quantity 1 5.4L V8 327cid
ChevroletChevy II1968Front Quantity 1 5.7L V8 350cid
ChevroletNova1974-1969Front Quantity 1 5.7L V8 350cid
ChevroletNova1973-1970Front Quantity 1 5.0L V8 307cid
ChevroletNova1970Front Quantity 1 6.5L V8 396cid
ChevroletNova1970Front Quantity 1 6.6L V8 402cid
OldsmobileOmega1974-1973Front Quantity 1 5.7L V8 350cid
PontiacFirebird1969Front Quantity 1 4.1L L6 250cid
PontiacFirebird1968Front Quantity 1 6.6L V8 400cid
PontiacFirebird1967Front Quantity 1 3.8L L6 230cid
PontiacVentura1974-1973Front Quantity 1 5.7L V8 350cid

question_answer Customer Questions and Answers


Question:
Will part number 6312 raise my 1970 Chevy Nova?
Answer:
No, part number 6312 will not raise the 1970 Chevy Nova, it is a stock replacement.

Question:
For part number 6312, what is the inside diameter, spring rate, and height?
Answer:
Part number 6312 has an inside diameter of 3.68 inches, a spring rate of 337 lbs per inch, a free height of 16.06 inches, and an installation height of 10.75 inches.

Question:
What is the spring rate of part number 6312?
Answer:
Part number 6312 has a spring rate of 337 lbs per inch.

Question:
Will MOOG-6312 fits BB Camaro?
Answer:
Moog does not have any springs fitted for a 68 Camaro with a BB.

Question:
How many pounds can the Coil Springs 6312 holde up to?
Answer:
It can hold up to 1800.00 lbs and the spring rate lbs per inch = 337.00. lbs

Question:
What is the rate and load of this spring?
Answer:
Spring rate is 337 pounds per inch and the load rating is 1800 pounds.