moog-ck80669 | Front Upper Control Arm | 2007-2015 GMC Sierra 1500

  • moog-ck80669 Front Upper Control Arm and Ball Joint - Driver Side
  • moog-ck80669 Front Upper Control Arm and Ball Joint - Driver Side

Front Upper Control Arm and Ball Joint - Driver Side

Manufacturer: MOOG
Part Number: moog-ck80669
Price: $158.98

check_box Free Shipping!check_box In Stock check_box Ships Immediately


Suggested part for moog-ck80669: moog-ck80670
moog-ck80670 Front Upper Control Arm and Ball Joint - Passenger Side
Front Upper Control Arm and Ball Joint - Passenger Side

Suggested part for moog-ck80669: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
grease-gun-combo

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Upper Control Arm and Ball Joint - Driver Side moog-ck80669 fits these vehicles:
Details

moog-ck80669 | Front Upper Control Arm | 2007-2015 GMC Sierra 1500

2007 Chevrolet Silverado
  • Fits submodels: LT, LTZ, and WT
2014-2015 Chevrolet Silverado 1500, 2009-2016 Chevrolet Tahoe, 2014-2015 GMC Sierra 1500
  • Will not fit aluminium steering knuckles
2007 GMC Sierra
  • Fits submodels: Denali, SLE, SLT, and WT
2008 GMC Sierra
  • Fits submodel Denali
For passenger side use ck80670

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

MOOG moog-ck80669

Product Reviews for moog-ck80669 | Front Upper Control Arm | 2007-2015 GMC Sierra 1500

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-ck80669

5 out of 5 based on 1 user reviews. Write a Review

B
verified_user

starstarstarstarstar" Awesome parts! "

Moog is hands down the best suspension parts made!

verified_user Verified Buyer - - . MOOG moog-ck80669 - 5 out of 5
Fitment for moog-ck80669
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
CadillacEscalade2014-2007Front Left Upper Quantity 1
CadillacEscalade ESV2014-2007Front Left Upper Quantity 1
CadillacEscalade EXT2013-2007Front Left Upper Quantity 1
ChevroletAvalanche2013-2007Front Left Upper Quantity 1
ChevroletSilverado 15002015-2007Front Left Upper Quantity 1
ChevroletSuburban 15002014-2007Front Left Upper Quantity 1
ChevroletTahoe2016-2007Front Left Upper Quantity 1
GMCSierra 15002015-2007Front Left Upper Quantity 1
GMCYukon2014-2007Front Left Upper Quantity 1
GMCYukon XL 15002014-2007Front Left Upper Quantity 1

question_answer Customer Questions and Answers


Question:
Moog - CK80669 - Front Left Upper control arm and ball joint - 2008 GMC Sierra 1500 4x4 Is part number Moog-CK80669 ball joint replaceable for future repairs?
Answer:
Moog-CK80669 is the correct driver side upper control arm. The ball joint is not replaceable.

Question:
Are the ball joints from part number ck80669 replaceable?
Answer:
The ball joints in the ck80669 are not replaceable.

Question:
Do all CK upper control arms come pregreased or no?
Answer:
After the control arms are assembled grease is injected in the ball joint. This to preserve the control arm ball joint while it sets on the shelf. The ball joint must be greased after it is installed and every oil change.

Question:
I need to replace the upper and lower control arms which would work best with a 5in suspension lift?
Answer:
If you have a spindle lift and no aftermarket upper control arms the Moog control arms should work. I would use the CK series control.

Question:
What is the difference in Upper control arms Model CK80670 & RK80670?
Answer:
Put this link in a Google or Yahoo search and it will explain the difference between the RK and CK series control arms: https://www.suspension.com/moog-ck80670.

Question:
Can I purchase just the dust boot from the moog-ck80669?
Answer:
Unfortunately no, Moog does not sell just their dust boots for the ball joints, tie rod end, endlinks, or control arms.

Question:
I purchased a moog-ck80669 from my local shop and it is missing the hardware, how can I get the missing hardware?
Answer:
We are an authorized dealer of Moog and not Moog directly, Unfortunately Moog does not sell their hardware alone from their kits, you will need to get back with your original dealer to get that missing hardware for your kit.

Question:
Can I use the moog-ck80669 upper control arm with my super lift 08 Silverado 1500 Z71?
Answer:
Unfortunately we do not guarantee or suggest Moog parts to fit on lifted vehicles.

Question:
Do you have a part number for upper ball joint that will fit a 2011 cadillac escalade EXT?
Answer:
The upper ball joint is not replaceable. You have to replace the ball joint.

Question:
I purchased the moog-ck80669 and to my surprise the grease zerk was not installed and the hole for it is not tapped? how do I install this grease zerk?
Answer:
The zerk in the moog-ck80669 control arm assembly is a self tapping zerk. All you will need to do is be careful while treading the zerk into the ball joints backing plate.

Question:
I was wondering what ball joints I would need to replace the worn ones currently in them?
Answer:
The upper ball joint is not replaceable. You have to replace the control arm.

Question:
Moog-CK80669 - Front Left Upper Control Arm - 2008 Chevrolet Silverado 1500 - do these upper control arms sell in a set and are the ball joints alone replaceable?
Answer:
Moog-ck80669 is sold as a single control arm. The Ball joint cannot be replaced. You have to replace the control arm.