moog-es800948 | Front Outer Tie Rod | GMC Yukon | MOOG-ES800948

  • moog-es800948 360image 1
  • moog-es800948 Front Outer Tie Rod End
  • moog-es800948 Front Outer Tie Rod End
  • moog-es800948 Front Outer Tie Rod End
  • moog-es800948 Front Outer Tie Rod End
  • moog-es800948 360image large 1

Front Outer Tie Rod End

Manufacturer: MOOG
Part Number: moog-es800948
Price: $56.86

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Outer Tie Rod End moog-es800948 fits these vehicles:

moog-es800948 | Front Outer Tie Rod | GMC Yukon | MOOG-ES800948

Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.

Moog Tie Rod Box
Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

Fitment for moog-es800948
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
CadillacEscalade2017-2015Outer Quantity 2
CadillacEscalade ESV2017-2015Outer Quantity 2
ChevroletSilverado 15002017-2014Outer Quantity 2
ChevroletSuburban2017-2015Outer Quantity 2
ChevroletSuburban 3500 HD2016Outer Quantity 2
ChevroletTahoe2017-2015Outer Quantity 2
GMCSierra 15002017-2014Outer Quantity 2
GMCYukon2017-2015Outer Quantity 2
GMCYukon XL2017-2015Outer Quantity 2

question_answer Customer Questions and Answers


Question:
How many tie rods come in the kit ES800948?
Answer:
Part es800948 only comes one in a kit you will need to purchase two for each vehicle.

Question:
Can I replace only the outer tie rod ends from Moog on the stock inner tie rod ends?
Answer:
Moog parts are OEM replacement parts. In this case moog-es800948 will screw into the inner tie rod.

Question:
Are this aluminum?
Answer:
No. Cast steel.

Question:
What is the thread size on outer tie rod?
Answer:
Here is the specs for moog-es800948 that are listed in the Moog e-catalog: End 1 Thread Diameter (MM) 16.0 End 1 Gender FEMALE End 2 Gender Female Dust Boot Included Yes End 2 Thread Diameter (MM) 14.0 Greaseable Yes End 1 Thread Direct tion Clockwise End 2 Thread Direction Clockwise End 2 Thread Pitch (MM) 2.0 End 1 Thread Pitch (MM) 1.5 Length - Stud Center To End (IN) 5.510 ...see more

Question:
Is the female end of the tie rod std. or metric and what size is it
Answer:
moog-es800948 the female dimensions are 16.0mm x 1.5mm

Question:
Are they pre greased?
Answer:
Moog-es800948 has grease injected after it is assembled. This is to preserve the part while it sits on the shelf. It will be greased after it is installed and every oil change with a HD chassis grease with the NLGI certification.