moog-k500227 | Front lower Ball Joint | Chevrolet Equinox | K500227

  • moog-k500227 Front Lower Ball Joint
  • moog-k500227 Front Lower Ball Joint

Front Lower Ball Joint

Manufacturer: MOOG
Part Number: moog-k500227
Price: $50.02

check_box In Stock check_box Ships Immediately


Suggested part for moog-k500227: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
While MOOG greaseable parts come greased from the factory, they should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k500227: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Lower Ball Joint moog-k500227 fits these vehicles:

moog-k500227 | Front lower Ball Joint | Chevrolet Equinox | K500227

Moog Problem Solver Ball Joints

Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.

Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.

Ball Joints Moog
moog ball joint

Warranty

Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.

MOOG moog-k500227

Product Reviews for moog-k500227 | Front lower Ball Joint | Chevrolet Equinox | K500227

5 Star (0)
0%
4 Star (0)
0%
3 Star (1)
100%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstar_borderstar_border

MOOG moog-k500227

3 out of 5 based on 1 user reviews. Write a Review

D
verified_user

starstarstarstar_borderstar_border" Good, but a pain... "

Nice ball joint, but the zerk will not thread into the part easily. Better have a tap available. Editors Note: The grease is self tapping. The best way I have found is to put a little grease on the threads and put pressure on top of the zerk while screwing the zerk in.

verified_user Verified Buyer - - . MOOG moog-k500227 - 3 out of 5

question_answer Customer Questions and Answers


Question:
Will this work on the equinox with a 3.0 liter engine?
Answer:
Yes, Moog ball joint k500227 is the correct lower ball joint.

Question:
Installing a K500227 ball joint and want to install the grease fitting. How do I remove the plug in the bottom of the ball joint to thread in the grease fitting?
Answer:
Do not remove the plug on the end cap. There is a hole in the body of the ball joint for the grease zerk to be screwed into.

Question:
Bought ball joints k500227 for above vehicle was wondering how to put in zerk grease fitting in where what looks like a plug or rivet is now ?
Answer:
Do not remove the plug. There is a hole in the base of the ball joint on the control arm side for the grease zerk.

Question:
What size is the threading on the grease zerk in the moog-k500227 ball joint kit?
Answer:
Moog grease zerks will have a 1/4-28 thread.