lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Control Arm Bushings
Controlling Comfort and Steering
If your vehicle is suffering from early tire wear, handling issues, or loud noises under the chassis, you could be dealing with worn OE control arm bushings. Designed to attach the steering knuckle and wheel assembly to the vehicle, your control arms are a crucial part of your steering system. The bushings themselves absorb impacts from the road, smoothing and quieting your ride.
Long-Term Performance and Long-Term Coverage
Moog crafts each of their bushings to either meet or exceed OE specifications. While the OE bushings might sag or rot away, Moog's control arm bushings are there for the long haul. Moog backs this up by covering all of their control arm bushings with a lifetime warranty handled in-house here at DST.
question_answer Customer Questions and Answers
- Question:
- How many lower control arm bushing per side?
- Answer:
- moog-k5262 has 2 to a box. If doing the left and right sides you would need to purchase 2 boxes.
- Question:
- What is the outside diameter of these bushings?
- Answer:
- Here is the specs for moog-k5262 control arm bushings: Material Steel Clad Rubber Length (IN) 2.410 Inside Diameter (IN) 0.570 Outside Diameter (IN) 1.900
- Question:
- What is the OD of the bushings?
- Answer:
- Here are the specs for moog-k5262 bushing kit: Length (IN) 2.410 Inside Diameter (IN) 0.570 Outside Diameter (IN) 1.900
- Question:
- Moog-K5262 - Front lower rearward/forward control arm bushings - 2000 Chevy Blazer 4wd - Does this part number include two different bushings for use in one control arm? For example: left front lower control arm - front and rear bushings. my parts catalogs refer to forward and rearward bushings. I need all four bushings for both front lower control arms. Will two of this part number fill my needs? thank you.
- Answer:
- Part Number Moog-K5262 is the front lower forward bushings only, it will come with two bushings but will only replace the front lower forward position control arm bushings. A bushing kit that will cover both forward and rearward front lower control a arm bushings would be part number Moog-K6333. You will need two of the Moog-K6333 to replace both left and right lower control arm bushings. ...see more