moog-k6098 | Front Upper Control Arm Shaft | 1969-1972 Chevy Blazer

  • moog-k6098 Front Upper Control Arm Shaft

Front Upper Control Arm Shaft

Manufacturer: MOOG
Part Number: moog-k6098
Price: $70.72

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Upper Control Arm Shaft moog-k6098 fits these vehicles:
Details

moog-k6098 | Front Upper Control Arm Shaft | 1969-1972 Chevy Blazer

Fits Left or Right Side
MOOG moog-k6098

Product Reviews for moog-k6098 | Front Upper Control Arm Shaft | 1969-1972 Chevy Blazer

5 Star (3)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k6098

5 out of 5 based on 3 user reviews. Write a Review

C
verified_user

starstarstarstarstar" Review 1 Year Later "

Part of a full front end rebuild on a 71 C10...better then new.

verified_user Verified Buyer - - . MOOG moog-k6098 - 5 out of 5
J
verified_user

starstarstarstarstar" Good quality as expected from Moog "

The box came with all parts needed to make the swap. The instructions were good, but the diagram was a bit small.

verified_user Verified Buyer - - . MOOG moog-k6098 - 5 out of 5
J
verified_user

starstarstarstarstar" Good quality as expected from Moog "

The box came with all parts needed to make the swap. The instructions were good, but the diagram was a bit small.

verified_user Verified Buyer - - . MOOG moog-k6098 - 5 out of 5
Fitment for moog-k6098
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
ChevroletBlazer1972-1969Front UpperRWD Quantity 2
ChevroletC10 Panel1967-1963Front Upper Quantity 2
ChevroletC10 Pickup1972-1963Front Upper Quantity 2
ChevroletC10 Suburban1972-1967Front Upper Quantity 2
ChevroletG10 Van1972-1970Front Upper Quantity 2
ChevroletG20 Van1971-1970Front Upper Quantity 2
ChevroletP10 Series1967-1963Front Upper Quantity 2
ChevroletP10 Van1972-1968Front Upper Quantity 2
ChevroletSuburban1966-1963Front Upper Quantity 2
GMC10001966Front UpperRWD Quantity 2
GMC1000 Series1965-1963Front UpperRWD Quantity 2
GMCC15/C1500 Pickup1972-1967Front Upper Quantity 2
GMCC15/C1500 Suburban1972-1967Front Upper Quantity 2
GMCG15/G1500 Van1972-1970Front Upper Quantity 2
GMCG25/G2500 Van1971-1970Front Upper Quantity 2
GMCJimmy1972-1971Front UpperRWD Quantity 2
GMCP10001966Front Upper Quantity 2
GMCP15/P1500 Van1972-1967Front Upper Quantity 2
GMCPB1000 Series1966-1963Front Upper Quantity 2
GMCSuburban1966-1963Front UpperRWD Quantity 2

question_answer Customer Questions and Answers


Question:
Do you sell the control arm shaft bushings without purchasing the shaft kit?
Answer:
The screw in bushings are not sold separately. Only in the kit moog-k6098.

Question:
What is the control arm bushing part number that goes with k6098?
Answer:
The bushing or the dust boot for moog-k6098 is not sold separately.

Question:
Does this part K6098 including the a-arm bushings or just the shaft bushings?
Answer:
The part K6098 does not come with the a-arm bushings it only comes with the shaft bushings.

Question:
Are the bushings with the upper and lower control arm shafts made of rubber or polyurethane ?
Answer:
The bushing is made of metal and the dust seals are rubber.