moog-k6145t | Front Lower Ball Joint | Buick Opel | MOOG-K6145t

  • moog-k6145t 360image 1
  • moog-k6145t Front Lower Ball Joint
  • moog-k6145t Front Lower Ball Joint
  • moog-k6145t Front Lower Ball Joint
  • moog-k6145t Front Lower Ball Joint
  • moog-k6145t 360image large 1

Front Lower Ball Joint

Manufacturer: MOOG
Part Number: moog-k6145t
Price: $32.24

check_box In Stock check_box Ships Immediately


Suggested part for moog-k6145t: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
While MOOG greaseable parts come greased from the factory, they should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k6145t: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik JT-6 High Temp Multi-Purpose Grease tube refill.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Lower Ball Joint moog-k6145t fits these vehicles:
Details

moog-k6145t | Front Lower Ball Joint | Buick Opel | MOOG-K6145t

Fits these models with RWD:
  • Buick Electra 1985-1989
  • Buick LeSabre 1986-1990
  • Cadillac Fleetwood 1985-1993
  • Chevrolet Blazer 1995-2005
  • Chevrolet S10 1983-2003
  • Chevrolet S10 Blazer 1983-1994
  • GMC Jimmy 1992-2001
  • GMC S15 1983-1990
  • GMC S15 Jimmy 1983-1991
  • GMC Sonoma 1991-2003
  • Isuzu Hombre 1998-2000
  • Oldsmobile Cutlass Supreme 1988
  • Oldsmobile Delta 88 1985
Footnotes
  • Problem Solver

Front Lower Ball Joint | 1970-2002 Chevrolet Camaro

The MOOG-k6145t Ball Joint is a better replacement for the original ball joints than OE replacements. The original joints are susceptible to damage from different road hazards that may break them down. When the ball joint breaks down, the vehicle can experience clanking and banging, uneven tire wear, and wheel misalignment. This ball joint was made to keep the wheels stable through the pre-installed features that make these ball joints better than standard OE ball joints. These features include the gusher bearing that allows for grease to move freely and the heat-treated stud for more durability.

MOOG k6145t Ball Joint

broken ball joint

The Symptoms of a Failing Ball Joint

This ball joint can be used for a wide variety of vehicles ranging from the Chevrolet Camaro to the Oldsmobile Cutlass, so the strain that the ball joints go through can vary. But overall, if the factory ball joints for these vehicles fail, the vehicle and its driver could possibly go through problems that make driving more difficult. When some debris gets inside a ball joint, it starts to break down. When ball joints break down, they might loosen, and the vehicle may experience some wheel misalignment and uneven tire wear. The k6145t ball joint, like other "Problem Solver" ball joints, is made specifically to resist certain potential problems and last much longer than factory-supplied ball joints.


What Makes This Ball Joint so Special?

All of MOOG's "Problem Solver" Ball Joints have features that are made to help make sure they last a long time and do not break. Its design allows for the ball joint to be easily greased. It also has a gusher bearing that allows for the easy flow of grease through the bearing while also flushing out the debris that finds its way inside the joint. It has a heat-treated stud that is resistant to breaking while also being flexible enough in emergency situations. Finally, it also boasts a pressed-in endplate that keeps itself pressed against the bottom of the ball joint to keep it from rattling around if it wears out.

The MOOG-k6145t ball joint is a longer lasting and more durable option for replacing the original ball joints on a multitude of vehicles. Make sure to get your replacements as soon as possible!

70-02 Chevy Camaro Front Lower Ball Joint
MOOG moog-k6145t

Product Reviews for moog-k6145t | Front Lower Ball Joint | Buick Opel | MOOG-K6145t

5 Star (8)
80%
4 Star (2)
20%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k6145t

5 out of 5 based on 10 user reviews. Write a Review

K
verified_user

starstarstarstarstar" Review 2 Years Later "

All working great.

verified_user Verified Buyer - - . MOOG moog-k6145t - 5 out of 5
R
verified_user

starstarstarstarstar_border" Very impressed "

When got part it wasnt in box but used it anyway and so far its holding up. Editors note: It is possible that the ball joint was not sent in a Moog box. This is to help our shipping costs. We only sell Moog ball joints. In this case the end plate should have had Moog Problem Solver stamped on it.

verified_user Verified Buyer - - . MOOG moog-k6145t - 4 out of 5
G
verified_user

starstarstarstarstar" Review 1 Year Later "

Great !

verified_user Verified Buyer - - . MOOG moog-k6145t - 5 out of 5
S
verified_user

starstarstarstarstar" Review 2 Years Later "

Pretty good parts its been holding for 2 year no headache with the parts so thank u guy for the good quality

verified_user Verified Buyer - - . MOOG moog-k6145t - 5 out of 5

Fitment for moog-k6145t
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
BuickApollo1975Front Lower Quantity 2
BuickCentury1981-1973Front Lower Quantity 2
BuickElectra1989-1985Front LowerRWD Quantity 2
BuickElectra1984-1977Front Lower Quantity 2
BuickEstate Wagon1983-1980Front Lower Quantity 2
BuickLeSabre1990-1986Front LowerRWD Quantity 2
BuickLeSabre1985-1977Front Lower Quantity 2
BuickRegal1987-1973Front Lower Quantity 2
BuickRiviera1978-1977Front Lower Quantity 2
BuickRoadmaster1996-1991Front Lower Quantity 2
BuickSkylark1979-1975Front Lower Quantity 2
CadillacBrougham1992-1987Front Lower Quantity 2
CadillacCommercial Chassis1996-1994Front Lower Quantity 2
CadillacDeVille1984-1977Front Lower Quantity 2
CadillacFleetwood1996-1977Front Lower Quantity 2
CadillacFleetwood1993-1985Front LowerRWD Quantity 2
CadillacSeville1979-1976Front Lower Quantity 2
ChevroletBlazer2005-1995Front LowerRWD Quantity 2
ChevroletCamaro2002-1970Front Lower Quantity 2
ChevroletCaprice1996-1977Front Lower Quantity 2
ChevroletChevelle1973Front Lower Quantity 2
ChevroletCommercial Chassis1994-1991Front Lower Quantity 2
ChevroletEl Camino1987-1973Front Lower Quantity 2
ChevroletImpala1996-1977Front Lower Quantity 2
ChevroletLLV1995-1987Front Lower Quantity 2
ChevroletMalibu1983-1973Front Lower Quantity 2
ChevroletMonte Carlo1988-1973Front Lower Quantity 2
ChevroletNova1979-1975Front Lower Quantity 2
ChevroletS102003-1983Front LowerRWD Quantity 2
ChevroletS101982Front Lower Quantity 2
ChevroletS10 Blazer1994-1983Front LowerRWD Quantity 2
GMCCaballero1987-1978Front Lower Quantity 2
GMCJimmy2001-1992Front LowerRWD Quantity 2
GMCS151990-1983Front LowerRWD Quantity 2
GMCS151982Front Lower Quantity 2
GMCS15 Jimmy1991-1983Front LowerRWD Quantity 2
GMCSonoma2003-1991Front LowerRWD Quantity 2
GMCSprint1977-1973Front Lower Quantity 2
IsuzuHombre2000-1998Front LowerRWD Quantity 2
IsuzuHombre1997-1996Front Lower Quantity 2
Oldsmobile981984-1977Front Lower Quantity 2
OldsmobileCustom Cruiser1992-1977Front Lower Quantity 2
OldsmobileCutlass1981-1973Front Lower Quantity 2
OldsmobileCutlass Calais1984-1978Front Lower Quantity 2
OldsmobileCutlass Cruiser1983-1980Front Lower Quantity 2
OldsmobileCutlass Salon1987-1975Front Lower Quantity 2
OldsmobileCutlass Supreme1988Front LowerRWD Quantity 2
OldsmobileCutlass Supreme1987-1973Front Lower Quantity 2
OldsmobileCutlass Tiara1976Front Lower Quantity 2
OldsmobileDelta 881985Front LowerRWD Quantity 2
OldsmobileDelta 881984-1977Front Lower Quantity 2
OldsmobileOmega1979-1975Front Lower Quantity 2
PontiacBonneville1986-1977Front Lower Quantity 2
PontiacCatalina1981-1977Front Lower Quantity 2
PontiacFirebird2002-1970Front Lower Quantity 2
PontiacGrand Am1980-1973Front Lower Quantity 2
PontiacGrand LeMans1982-1981Front Lower Quantity 2
PontiacGrand Prix1987-1973Front Lower Quantity 2
PontiacGrand Safari1978-1977Front Lower Quantity 2
PontiacGTO1973Front Lower Quantity 2
PontiacLeMans1981-1973Front Lower Quantity 2
PontiacParisienne1986-1983Front Lower Quantity 2
PontiacPhoenix1979-1977Front Lower Quantity 2
PontiacSafari1989-1987Front Lower Quantity 2
PontiacVentura1977-1975Front Lower Quantity 2

question_answer Customer Questions and Answers


Question:
I damaged the dust boot when installing it on the lower ball joint (K6145T) and want to replace it with the stock MOOG boot. Would you please let me know where I can buy spares.
Answer:
Moog does not sell the dust boots. I have universal polyurethane dust boots sold by dimensions. Put this link in a Google or Yahoo search: https://www.suspension.com/universal-dust-boots.asp.

Question:
There has been some confusion as to which Moog ball joints are made in the USA. Are these part numbers made in the USA? K6462 and K6145t. Thank you for your help! -Tim (United States Marine and Proud American)
Answer:
Moog parts are actually made in 18 different countries! How do you tell where your part is made? Each Moog part has the country of origin listed on the label, however, you can order two of the exact same part number but they may come from two differ rent countries of origin! They are the same part but come from two different countries. However, if where they are made is important to you, you may always call us and we can check the label for you before we ship it. ...see more

Question:
Do you have instructions for installing the dust boot?
Answer:
yes, here are the instructions: https://fme-cat.com/livedocs/DYK11_102_ENG-R.pdf