lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Control Arm Bushings
Controlling Comfort and Steering
If your vehicle is suffering from early tire wear, handling issues, or loud noises under the chassis, you could be dealing with worn OE control arm bushings. Designed to attach the steering knuckle and wheel assembly to the vehicle, your control arms are a crucial part of your steering system. The bushings themselves absorb impacts from the road, smoothing and quieting your ride.
Long-Term Performance and Long-Term Coverage
Moog crafts each of their bushings to either meet or exceed OE specifications. While the OE bushings might sag or rot away, Moog's control arm bushings are there for the long haul. Moog backs this up by covering all of their control arm bushings with a lifetime warranty handled in-house here at DST.
question_answer Customer Questions and Answers
- Question:
- Will part number k6178 fit my 82 cutlass?
- Answer:
- Yes, part number k6178 will fit the 82 cutlass.
- Question:
- Will the rear lower-link bushings also be used for the top links?
- Answer:
- Yes moog-k6178 will fit the rear upper and lower trailing (control) arms.
- Question:
- MOOG-K6178 - Control Arm bushing kit - 1987 Buick Regal - I see that the rear lower and upper control arms both share the same product number......k6178. To do both sides, upper and lower, I would need 4 kits of 2......correct? Also, just to be sure...they are the same interchangeable part, correct? thank you!
- Answer:
- Moog-K6178 will fit for the rear lower and upper control arm bushings of an 87 Regal. This kit will cover one arm, so you will need 4 of this to cover the two lower rear control arms and the 2 rear upper control arm bushings.
- Question:
- MOOG-K6178 - Control Arm bushing kit: 90 Chevy Camaro RS - Does this part belong on the rear end of the car?
- Answer:
- Moog-K6178 is for the rear lower control arm bushings.