unarchive In The Box of moog-k700541 keyboard_arrow_down
- Qty 1 Stabilizer Bar Link
lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog has engineered a new line of end links to enhance durability and performance.
Moog Problem Solver: Sway Bar End Links
Raising the bar
Moog's Problem Solver sway bar link kits have raised the bar for OE replacement links. Targeting the easily corroded traditional non-socket style links, Moog has engineered a new line of end links to enhance durability and performance. The entire line of Moog's Problem Solver end links are available right here at DST and include a lifetime warranty.
Original design and other supplier's flaws
The traditional non-socket style sway bar link that is installed factory on vehicles is highly susceptible to early failure. The OE design, as well as many aftermarket suppliers, use a small diameter bolt on the sway bar link. This small size bolt opens up the link to the damaging effects of road shock and corrosion. If the smaller bolt isn't bad enough, these links utilize neoprene bushings that do not stand up well to stress and weather conditions. Many suppliers also use a rolled steel sleeve which can allow harmful contaminants in, leading to corrosion and early failure.
Moog problem solving features
Moog's problem solver parts target factory defects or poor original design, replacing them with a better more durable part. Moog's sway bar link set provides enhanced performance and increased durability. This new design includes polyurethane bushings. These polyurethane bushings are much more durable than the neoprene.
Durable hardware
A black oxide 3/8" Grade 8 bolt provides increase strength and corrosion protection. Paired with a barrel nut that provides proper thread engagement, these "problem solving" end links are much easier to install. Nested washers are included to help keep the bushings centered during installation. The T6 aluminum hex spacer keeps contaminants out and is anodized to prevent corrosion.
Sway Bar End link Part Numbers
Moog has engineered several sizes of end links to cover numerous vehicles. While the length varies depending on the vehicle, all of Moog's Problem Solver sway bar end links include these problem-solving features.
Product Reviews for moog-k700541 | Rear Sway Bar End Link Replacement | Ford Taurus
- 5 Star (5)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k700541
starstarstarstarstar" Review 2 Years Later "
This review is for the rear sway bar links for a 1996 Ford Taurus Sedan. The OE ones were thin like a pencil, these are very heavy duty. The bushings are a totally different design than the OE and that is fantastic. Install was fairly easy as long as you assemble the link right and keep the car level when you tighten it. These totally changed the way my car handled back to a tighter feel. I didnt realize the original link broke and but it felt terrible in the corners. These Moog units solved the problem. I also have Moog on the front because the original plastic ones failed repeatedly. The only negative I can say is that the bolts, top, and bottom rusted a bit on these in 2 years which is a little disappointing since I didnt drive it in the road salt at all. I undercoated them recently so I dont think I will have any issues. Overall great part. I would buy them again in a heartbeat and highly recommend. They cut alot of corners with OE parts, Moog does not.
verified_user Verified Buyer - Steve - . MOOG moog-k700541 - 5 out of 5starstarstarstarstar" Parts well built and packaged. "
Very satisfied, extremely easy to install.
verified_user Verified Buyer - Ron Wilke - . MOOG moog-k700541 - 5 out of 5starstarstarstarstar" Parts well built and packaged. "
Very satisfied, extremely easy to install.
verified_user Verified Buyer - Ron Wilke - . MOOG moog-k700541 - 5 out of 5starstarstarstarstar" Parts well built and packaged. "
Very satisfied, extremely easy to install.
verified_user Verified Buyer - Ron Wilke - . MOOG moog-k700541 - 5 out of 5