moog-k750023 | Rear Sway Bar End Link | 2005-2009 Subaru Legacy | MOOG

  • moog-k750023 360image 1
  • moog-k750023 Rear Sway Bar End Link
  • moog-k750023 Rear Sway Bar End Link
  • moog-k750023 Rear Sway Bar End Link
  • moog-k750023 Rear Sway Bar End Link
  • moog-k750023 Rear Sway Bar End Link
  • moog-k750023 360image large 1

Rear Sway Bar End Link

Manufacturer: MOOG
Part Number: moog-k750023
Price: $26.10

check_box In Stock check_box Ships Immediately


  • Qty 1 Stabilizer Bar Link (Not sold in pairs)
Suggested part for moog-k750023: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
Grease Gun Combo

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

Cross Reference from moog-k750023 to beckarnley-101-5723
Beck Arnley beckarnley-101-5723
. Standard OE replacement.
Price: $23.74
Warranty: 3 Years or 50000 Miles

FitmentRear Sway Bar End Link moog-k750023 fits these vehicles:

moog-k750023 | Rear Sway Bar End Link | 2005-2009 Subaru Legacy | MOOG

Rear Sway Bar End Link | 2003-2006 Subaru Baja

The sway bar is a part of the vehicle that helps keep the vehicle level when going through a turn. The part that connects it to the rest of the suspension is known as the sway bar end link. The vehicles that fit this end link, like the 2003-2006 Subaru Baja and the 2000-2009 Honda S2000, which can move at high speeds, can put a large amount of stress on the sway bar. The end links help it handle that stress, keep it in place, and smooth motion transfer to the rest of the suspension. This k750023 Sway Bar End Link has multiple features that improve its durability and longevity.

2003-2006 Subaru Baja Sway Bar End Link

bad sway bar link end link 1

What Will Happen if my End Links Break?

While driving, the vehicle can come across some hazards that may damage the original sway bar end links. Depending on where you are, the sway bar may experience corrosion from rust created by moisture in the air, which can break down the metal inside the small ball joints. Another potential issue would be dirt and debris getting in the joints and wearing down the interior as the grease dries out. This causes the joints to loosen their hold on both the sway bar and the suspension. When the end link breaks down, the vehicle can experience a bit more body roll and clunking sounds. The best way to prevent these issues and increase performance is to replace the older end links with a stronger alternative to the original end links.


The Features of This End Link

This MOOG k750023 rear sway bar end link has features that help with deterioration and increase performance. It boasts two sealed boot shields that keep deteriorating hazards out of the joints. If debris gets past the boot, it also has a greasable socket that allows for new grease to flush out dirt and debris. It also resists normal wear and tear with its strong and durable construction made with premium materials. It also has two wrench flats that allow for easy installation and removal of the end link.

So, if you are looking for a great way to keep your sway bar stable and securely connected to the rest of the suspension, pick up one or two k750023 rear sway bar end links today!

Rear sway bar end link subaru s2000
MOOG moog-k750023

Product Reviews for moog-k750023 | Rear Sway Bar End Link | 2005-2009 Subaru Legacy | MOOG

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

MOOG moog-k750023

5 out of 5 based on 2 user reviews. Write a Review

N
verified_user

starstarstarstarstar" Review 2 Years Later "

Still holding up after 2 years on my daily driver. The rubber is in good shape and the hardware is rust free. I just had to take them off to replace an axle shaft, and they came off easy.

verified_user Verified Buyer - - . MOOG moog-k750023 - 5 out of 5
F
verified_user

starstarstarstarstar" Parts work great! "

Car is free of the rumbling noise thanks to your perfect parts. thanks!

verified_user Verified Buyer - - . MOOG moog-k750023 - 5 out of 5

compare_arrows Compare with Similar Parts


This Part
moog-k750023 compare
$26.10
Beck Arnley
Beck Arnley compare
$23.74
($2.36) cheaper
  • star_borderstar_borderstar_borderstar_borderstar_border
  • Standard OE replacement.

question_answer Customer Questions and Answers


Question:
Was wondering what country of origin is for Moog front and rear sway bar links is?
Answer:
As a Moog dealer we do not know where the parts are manufactured. Here is a link that explains country or origin: https://www.suspension.com/blog/where-are-moog-parts-made/. Put this link in a Google or Yahoo search and it should pull up.

Question:
Hello, I believe I need the following part: Moog K750023 (rear EndLink) but I see from the picture on your web Page that it includes Two nipples - are these for lubrication? If so how often do I need to lubricate the EndLink? what type of grease is required?
Answer:
Moog-k750023 is a greaseable end link and includes the grease zerks. It must be greased after it is installed and every oil change with a good quality HD chassis grease with the NLGI certification.

Question:
What is the thread size on the zerk fitting on K750023?
Answer:
On part number k750023 the thread size on the zerk fitting is 1/4 28 with a tapered thread.

Question:
Does moog-k750023 come pre-greased?
Answer:
Part Number moog-k750023 does come with some grease already, but you will need to grease them fully before driving and every oil change.

Question:
What are the small metal pieces that come with this endlink for? do they go on the back of the endlink? are they the Tapered stud?
Answer:
The metal pieces that go on the backing plate of the moog-k750023 are grease zerks or fittings. You will want to use these to grease your Moog endlink.

Question:
Are they sold in sets or individually.
Answer:
All Moog sway bar end links are sold individually.