moog-k80141 | Front Lower Ball Joint | Ford Crown Victoria | K80141

  • moog-k80141 360image 1
  • moog-k80141 Front Lower Ball Joint
  • moog-k80141 Front Lower Ball Joint
  • moog-k80141 Front Lower Ball Joint
  • moog-k80141 Front Lower Ball Joint
  • moog-k80141 Front Lower Ball Joint
  • moog-k80141 360image large 1

Front Lower Ball Joint

Manufacturer: MOOG
Part Number: moog-k80141
Price: $58.26

check_box In Stock check_box Ships Immediately


Suggested part for moog-k80141: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k80141: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.

Suggested part for moog-k80141: moog-rk80040
moog-rk80040 Front Upper Control Arm And Ball Joint - Driver Side
Save time, rather than pressing out your old ball joints, replace the whole arm with Moog's value-driven front left upper control arm with pre-installed OE style bushings.

Suggested part for moog-k80141: moog-rk80038
moog-rk80038 Front Upper Control Arm And Ball Joint - Passenger Side
Save time, rather than pressing out your old ball joints, replace the whole arm with Moog's value-driven front right upper control arm with pre-installed OE style bushings.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Lower Ball Joint moog-k80141 fits these vehicles:
Details

moog-k80141 | Front Lower Ball Joint | Ford Crown Victoria | K80141

Fits Left or Right Side

Moog's problem solver ball joint includes a metal gusher bearing and grease-able design for durability and long life.

Moog Problem Solver: Lower Ball Joint K80141

OE Design Flaws in your Aluminium Arm

A selling point to you when buying your Crown Vic or Grand Marquis was its aluminum control arms, right? You wouldn't fool anyone here at DST if you said yes. The OE suspension on this chassis utilizes an aluminum knuckle and control arm which requires a uniquely designed ball joint. In order to prevent damage to the aluminum knuckle, the ball stud taper on the OE ball joint doesn't wedge into the receptacle like a common ball joint. Instead, the ball joint uses a steep taper cone and a Belleville washer locknut to keep the ball joint securely in place. Also, the taper cone, housing, and washer are coated to prevent galvanic corrosion which happens when uncoated steel comes in contact with aluminum.

Moog Problem Solver Bulletins: K80141
Moog Problem Solver Bulletins: K80141

OE Replacement Design Requirements

That being said, it is very important to select a replacement ball joint that follows these strict OE design criterion. Otherwise, you won't be getting the proper function or longevity. There are many suppliers who claim to have a good OE replacement, but you need to make sure they aren't offering parts that:

  • Utilize a taper cone, housing and nut that are uncoated
  • Provide a taper cone as a separate piece making installation very difficult
  • Use a flange nut instead of the required Belleville washer nut (the flange nut can loosen during service, resulting in ball joint separation or the stud breaking

Problem Solving Engineering

Moog's problem solver line has a solution for you. Moog's problem solver parts target factory defects or poor original design, replacing them with a better more durable part. The K80141 is a lower ball joint for a 2003-2011 Ford Crown Victoria and Mercury Grand Marquis. Moog's problem solver ball joint includes a metal gusher bearing and grease-able design for durability and long life. The forged housing, unlike other OE replacements, is coated to prevent that galvanic corrosion that is common in an aluminum control arm.

Moog Problem Solver Bulletins: K80141
Moog Problem Solver Bulletins: K80141

Other Problem Solving Features

Also included in the K80141 is a built-in, and coated, taper cone allowing for easy operation. The supplied locknut features an OE-style Belleville washer for secure installation. And just like the rest of the pieces, the nut and washer are coated to guard against corrosion. Moog includes a very steep taper with this ball joint, taking a lot of the stress off of the aluminum arm.

question_answer Customer Questions and Answers


Question:
Do these ball joints come greased?
Answer:
moog-k80141 is greased after it is assembled to preserve it while it sits on the shelf. It must be greased after it is installed and every oil change.

Question:
Does k80141 fit the Police Interceptor model?
Answer:
Yes, Part Number moog-k80141 will work with the 2003 Ford Crown Victoria Police Interceptor.