moog-k90662 | Front Lower Ball Joint | Nissan Pathfinder | K90662

  • moog-k90662 360image 1
  • moog-k90662 Front Lower Ball Joint
  • moog-k90662 Front Lower Ball Joint
  • moog-k90662 Front Lower Ball Joint
  • moog-k90662 Front Lower Ball Joint
  • moog-k90662 360image large 1

Front Lower Ball Joint

Manufacturer: MOOG
Part Number: moog-k90662
Price: $79.92

check_box In Stock check_box Ships Immediately


Suggested part for moog-k90662: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
MOOG parts come greased from the factory, but should also be greased at the time of installation. After installation, MOOG recommends greasing these parts at each oil change for the best service life.

Suggested part for moog-k90662: mystik-jt6-hi-temp-multi-grease
mystik-jt6-hi-temp-multi-grease Mystik JT-6 High Temp Multi-Purpose Grease - 14 oz
Out of grease? No problem we've got you covered with this Mystik Multi-Purpose Grease tube refill.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

Cross Reference from moog-k90662 to beckarnley-101-4824
Beck Arnley beckarnley-101-4824
. Standard OE replacement.
Price: $55.08
Warranty: 3 Years or 50000 Miles

FitmentFront Lower Ball Joint moog-k90662 fits these vehicles:
Details

moog-k90662 | Front Lower Ball Joint | Nissan Pathfinder | K90662

Fits Left or Right Side

Moog Problem Solver Ball Joints

Moog Ball Joints provide long-lasting dependability and performance. Moog ball joints are made with a hardened steel stud ball. These have a full 360-degree range of movement, allowing for consistent stud articulation throughout the life of the part. Grease grooves allow full lubrication between the housing and the ball stud for extended life.

Ball joints are a pivotal part of your vehicle's suspension, so go with the best replacement with Moog's Ball Joints. A ball joint allows your wheels to rotate when you turn the steering wheel. If your ball joint has failed or is failing, your vehicle's ability to turn is severely hindered. Moog's Ball Joints use innovated designs to maximize the performance and durability of your suspension.

Ball Joints Moog
moog ball joint

Warranty

Not only do MOOG ball joints provide durability, they also provide peace of mind. Moog ball joints are covered by a Lifetime Warranty and, should you ever need it, can be handled directly through our DST Customer Service Team. Take turns confidently with a Moog ball joint.

compare_arrows Compare with Similar Parts


This Part
moog-k90662 compare
$79.92
  • star_borderstar_borderstar_borderstar_borderstar_border
  • This part
  • Bushing Material: Rubber
Beck Arnley
Beck Arnley compare
$55.08
($24.84) cheaper
  • star_borderstar_borderstar_borderstar_borderstar_border
  • Standard OE replacement.

question_answer Customer Questions and Answers


Question:
I just purchased a ball joint Moog K90662. What size of drill bit and tap do I need to drill and tap the hole to accept the ZerkL grease fitting?
Answer:
Moog grease zerks are actually self-tapping so you will not need to drill or tap the ball joint to accept the grease fitting.