moog-rk620172 | Front Upper Control Arm Assembly | S10 Blazer 1994-2005

  • moog-rk620172 Front Upper Control Arm And Ball Joint - Driver Side
  • moog-rk620172 Front Upper Control Arm And Ball Joint - Driver Side

Front Upper Control Arm And Ball Joint - Driver Side

Manufacturer: MOOG
Part Number: moog-rk620172
Price: $96.47

check_box In Stock check_box Ships Immediately


Suggested part for moog-rk620172: moog-rk620173
moog-rk620173 Front Upper Control Arm And Ball Joint - Passenger Side
Front Upper Control Arm And Ball Joint - Passenger Side

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Upper Control Arm And Ball Joint - Driver Side moog-rk620172 fits these vehicles:
Details

moog-rk620172 | Front Upper Control Arm Assembly | S10 Blazer 1994-2005

1995-2005 Chevrolet Blazer, 1984-2003 Chevrolet S10, 1984-1994 Chevrolet S10 Blazer, 2002 GMC Jimmy, 1984-1990 GMC S15, 1984-1991 GMC S15 Jimmy, 1991-2003 GMC Sonoma, and 1998-2000 Isuzu Hombre
  • Fits 4WD models ONLY
1998-1999 GMC Jimmy
  • Fits 4WD with sub models: SL, SLE, SLS, and SLT
  • For non 4WD models it fits sub model: Envoy
2000 GMC Jimmy
  • Fits 4WD with sub models: Diamond Edition, SLE, SLS, and SLT
  • For non 4WD models it fits sub model: Envoy
2001 GMC Jimmy
  • Fits 4WD with sub models: Diamond Edition, SLE, SLS, and SLT
For the passenger side use rk620173

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

Fitment for moog-rk620172
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
ChevroletBlazer2005-1995Front Left Upper4WD Quantity 1
ChevroletBlazer2001-1999Front Left UpperAWD Quantity 1
ChevroletS102004Front Left Upper Quantity 1
ChevroletS102003-1984Front Left Upper4WD Quantity 1
ChevroletS10 Blazer1994-1984Front Left Upper4WD Quantity 1
GMCJimmy2005-1998Front Left Upper Quantity 1
GMCJimmy2002-1992Front Left Upper4WD Quantity 1
GMCS151990-1984Front Left Upper4WD Quantity 1
GMCS15 Jimmy1991-1984Front Left Upper4WD Quantity 1
GMCSonoma2004Front Left Upper Quantity 1
GMCSonoma2003-1991Front Left Upper4WD Quantity 1
GMCSyclone1991Front Left Upper Quantity 1
GMCTyphoon1993-1992Front Left Upper Quantity 1
IsuzuHombre2000-1998Front Left Upper4WD Quantity 1
OldsmobileBravada2001-1991Front Left Upper Quantity 1

question_answer Customer Questions and Answers


Question:
Does your ball joint require greasing since there is no fitting. Can a fitting be installed?
Answer:
Ball joints and tie rods that do not have a grease fitting are sealed and are greased for life. It is not advisable to drill a hole and install a grease fitting. It will void the warranty.