moog-rk620252 | Front Lower Control Arm and Ball Joint | 187-1995 LLV

  • moog-rk620252 Front Lower Control Arm And Ball Joint - Driver Side - RWD
  • moog-rk620252 Front Lower Control Arm And Ball Joint - Driver Side - RWD

Front Lower Control Arm And Ball Joint - Driver Side - RWD

Manufacturer: MOOG
Part Number: moog-rk620252
Price: $123.06

check_box Free Shipping!check_box In Stock check_box Ships Immediately


Suggested part for moog-rk620252: moog-rk620251
moog-rk620251 Front Lower Control Arm And Ball Joint - Passenger Side - RWD
Front Lower Control Arm And Ball Joint - Passenger Side - RWD

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

FitmentFront Lower Control Arm And Ball Joint - Driver Side - RWD moog-rk620252 fits these vehicles:
Details

moog-rk620252 | Front Lower Control Arm and Ball Joint | 187-1995 LLV

1995-2005 Chevrolet Blazer
  • Fits RWD models ONLY
2003-2004 Chevrolet Blazer
  • Fits submodels: LS and Xtreme
2005 Chevrolet Blazer
  • Fits submodels: Base and Xtreme
1982-2003 Chevrolet S10, 1983-2001 Chevrolet S10 Blazer, 1992-2001 GMC Jimmy, 1982-1990 GMC S15, 1983-1991 GMC S15 Jimmy, 1991-2003 GMC Sonoma, and 1996-2000 Isuzu Hombre
  • Fits RWD models ONLY
1998-1999 GMC Jimmy
  • Fits submodels: SL, SLE, SLS, and SLT
2000-2001 GMC Jimmy
  • Fits submodels: SLE, SLS, and SLT
1995-2003 GMC Sonoma
  • For vehicles with ZQ8
For the passenger side use rk620251

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. Many of these ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

Fitment for moog-rk620252
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
ChevroletBlazer2005-1995Front Left LowerRWD Quantity 1
ChevroletLLV1995-1987Front Left Lower Quantity 1
ChevroletS102003-1982Front Left LowerRWD Quantity 1
ChevroletS10 Blazer1994-1983Front Left LowerRWD Quantity 1
GMCJimmy2001-1992Front Left LowerRWD Quantity 1
GMCS151990-1982Front Left LowerRWD Quantity 1
GMCS15 Jimmy1991-1983Front Left LowerRWD Quantity 1
GMCSonoma2003-1991Front Left LowerRWD Quantity 1
IsuzuHombre2000-1996Front Left LowerRWD Quantity 1

question_answer Customer Questions and Answers


Question:
When can I order part numbers k620252 and ck620252 again?
Answer:
Part numbers k620252 and ck620252 have been discontinued. The correct part number you will need now is rk620252.