Customer: impressed buyer - Total reviews (4) Rating:5 out of 5

Very noticeable difference but you notice some squeaking in the urethane. Worth it!

Customer: Brian Capprotti - Total reviews (1) Rating:5 out of 5

Was time consuming, easy until I had to install the bushings. Get them pressed in, don't bother with the giant washer, bolt and nut way. Car feels more stable in the rear. Glad I've done this once so I know what to expect if I do it again!!!

Customer: Sergio Pelayo - Total reviews (1) Rating:5 out of 5

Excellent Product

As a first time buyer I was referred to this product by a friend. And am satisfied how it all came together although it was very hard to get them in at the end. You have a tight fit which is what any enthusiast wants.

Customer: Thomas Tsai - Total reviews (1) Rating:5 out of 5

customer service is superb

I just want to tell everyone that. Energy suspension parts.com has one of the best customer service that I have ever encounter with online shop. Graham is definately the MAN!!! he patiently answered me bunch questions, and helped me thru the whole ordering process. Because of Graham, I will definately shop here again.....(time to save up more money). Thanks Graham.

Customer: Rocky Grove - Total reviews (1) Rating:5 out of 5

great

They are a little hard to install. But after they were installed I could tell a big difference in the way the car handled.

Customer: CHRIS - Total reviews (1) Rating:5 out of 5

ok

We changed these on the bench. Used a press to do it. Doing them in the car has got to be tough. Should make in w/metal housing and makes it a lot easier to install...

Customer: Raymond R - Total reviews (1) Rating:5 out of 5

Very Impressed

I purchased these bushings for my wife's 1990 Acura Integra.. Her car had 240,000 Miles on it and the bushings were showing the age bad.. I tried to just drop the swing bar and installed but realized I was going to have to remove it completely. There actually is not that much more involved to remove so I highly recommend it if you are going to install these. The old bushing had two half moon metal rings impregnated into the rubber which made it virtually impossible to cut out .. Eventually I decided to use my propane torch and burn the rubber.. Making sure not to get to hot and damage other bushings. After heating I used razor to cut away easily. Just had to repeat steps a few times until cleaned all out. Then just wire brushed clean. As for installing bushings with washers ( I could not find any place with washers 3 1/4" in size ) so I went to hardware store and bought two large square metal plates with hole in center.. they worked great for compressing bushing in. I must note that when I started installing they wanted to go in at an angle.. but I continued to tightening down on the washers and watch as it slowly continued down then straightened up and drop right in.. It was a lot harder then I expected to get old bushings out and cleaned up , but a lot easier to install new ones then expected.. I do believe stock bushings would be a lot harder to install since they are not as flexible as the Neophrane ones and may not go in without damage at angle.. but these had no problem.. And the handling was noticed right away.. I give this product a 5 Star for sure!!! Thanks

Customer: David John Kestek - Total reviews (1) Rating:5 out of 5

These were very hard to install even with a press. Getting them to start and stay straight was the problem. A short lead to pilot the start would be very helpful and there is plenty of room for it. Performance is as expected. As long as we are on the subject installed another of your bushing kits and the ID of one of the steel inserts was undersize. I am told these types of errors are common.Watch your QC. Thanks Dave

Customer: John Sherman - Total reviews (1) Rating:5 out of 5

Trailing Arm Bushing are great. Hardest part of the job was getting the old ones out. Your directions and pictures were very helpful. The new ones went in very easy.

Customer: James Leiber - Total reviews (1) Rating:5 out of 5

Good quality easy install

I have used a couple different brands including the OEM versions. These were by far the easiest for the install. The ride tends to be a little rougher, however, that is to be expected. Best thing was did NOT have to clock them. The shaft actually will self adjust into place which no other brand has done.

Customer: Aretha Kelly - Total reviews (1) Rating:5 out of 5

5

Lovely doing business with you. Will recommend you to my friends.

Customer: Christopher Stump - Total reviews (1) Rating:5 out of 5

Excellent Product!!!!!!

These bushings were a hard, time consuming install due to removing the complete trailing arm. They were a very tight fit. But that is exactly what a car enthusiast wants!!! They are nice and solid!!! Absolutely no noise as well!!! Great product!!! Would definitely recommend energy suspension!!!

Customer: Brandon Ross - Total reviews (1) Rating:5 out of 5

Its Energy Supension! U cant go wrong!!

My stock bushings were in much need of repair. I simply took my rear trailing arms to a local shop & had them pressed in. After installation rear suspension improvement was instantly recognized! Rear end is much stiffer and responds much more to driver input. A definite must for already in place suspension upgrades or if upgrading to rear disc as in case. Excellent upgrade!! A++ Thanks B.R.

Customer: ryan weber - Total reviews (1) Rating:5 out of 5

Great product

This is the second set of ES rear trailing arm bushings that I have installed. They work great and I have not had any squeaking problems. I have had them on the car for about a year. You need to use a lot of grease. I have not put them through autocross conditions yet, but for daily use they work great for the price.

Customer: Denvil D - Total reviews (1) Rating:5 out of 5

im in love with my ES bushings

I have a 1990 Integra 3dr and the rear trailing arm bushings were soft and one was almost completely torn. Made the rear wanna swing around every time I entered corners. Was researching bushings and came across ES polyurethane bushings, got myself a pair installed them and OMG the car feels wonderful. Takes corners like a train on rails. I love them, I definitely gonna get the rest of the set.

Customer: Timothy W. Skoog - Total reviews (1) Rating:5 out of 5

It was very easy to install these bushings & for my first time ever doing bushings it was all self explanatory.

Customer: FRUMENCIO F HENSON - Total reviews (1) Rating:5 out of 5

super

Installation was easy, cleaning the parts requires persistence. Otherwise instructions are clear and easy, thanks. My car is back in motion and quite.

Customer: Michael Goodwin - Total reviews (1) Rating:4 out of 5

Very good

I really like this product. I have installed these on my daily driver and average 600 miles a week. The ride is a little bit stiffer but suspension response and stability is really good. I am planning to do more work using Energy Suspension products. Strengths: Easy to install, simple to work with, love the color options Weaknesses: Instructions are poorly written, had to go on-line and do a considerable amount of research how to install efficiantly. You MUST do an alignment or these things will slide out. I drove mine 30 miles before the alignment and they shifted out about half-an-inch. Once done they have been no problem. I would really like it if you could get more colors (blue please).

Customer: Cameron E Goodale - Total reviews (1) Rating:5 out of 5

Excellent Urethane Bushings

The parts fit great and the car handles nice. Removing the old rubber was the hardest part, and it took a press and a torch to get it done, but the new Urethane slide right into place.