Universal Sway Bar End Links 9.8118

  • 9.8118 360image 1
  • 9.8118 Universal Sway Bar End Links 98118
  • 9.8118 Universal Sway Bar End Links 98118
  • 9.8118 Universal Sway Bar End Links 98118
  • 9.8118 Universal Sway Bar End Links 98118
  • 9.8118 Universal Sway Bar End Links 98118
  • 9.8118 360image large 1

Universal Sway Bar End Links 98118

Manufacturer: Energy Suspension
Part Number: 9.8118

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $24.75

check_box In Stock check_box Ships Immediately


  • 8 of 4806 - endlink grommets
  • 8 of 15.03.01.39 - cupped washer
  • 2 of 15.05.04.39 - 3/8"-16 x 7" bolt
  • 2 of 15.07.01.40 - 3/8"-16 nut
  • 2 of 15.10.23.39 - 9/16"O.D. x 3/8"I.D. x 2.9" sleeve
  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 9.8118 to 19409
Prothane 19409
Polyurethane.
Price: $29.31
Warranty: Lifetime Warranty

FitmentUniversal Sway Bar End Links 98118 9.8118 fits these vehicles:
Details
Universal Sway Bar Endlinks
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

Universal Sway Bar End Links 9.8118

Universal A = 4.45 Inch
Universal Sway Bar Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.

Need a different size? Select from below.

Complete end link set includes: firm durometer polyurethane bushings, zinc plated 3/8" grade 5 bolts, "ny-lock" nuts and heavy gauge washers.

Endlink Sizing ChartTO FIT/SELECT THE PROPER SET-
Vehicle must be on level ground (not jacked up) with wheels supporting it. Make sure stabilizer bar end eyelet (B) is parallel with the control arm (C). Many times they are not. You may be required to use a slightly longer or shorter sleeve length than the original. Measure length of (A) and compare to the chart to find the correct set.

Image Length of 'A' Part Number
Energy Suspension 9.8106 Endlink Grommets Grommets Only
1 Inch Outer Diameter
3/8 Inch Inner Diameter
5/8 Inch Nipple Outer Diameter
9.8106
Energy Suspension 9.8103 Endlink Grommets for Trucks Grommets Only
1.25 Inch Outer Diameter
7/16 Inch Inner Diameter
7/8 Inch Nipple Outer Diameter
9.8103
Energy Suspension 9.8105 Endlink Grommets and Washers Grommets and Washers
1.125 Inch Outer Diameter
3/8 Inch Inner Diameter
11/16 Inch Nipple Outer Diameter
9.8105
Energy Suspension 9.8122 2.55 Inch 9.8122
Energy Suspension 9.8120 3.25 Inch 9.8120
Energy Suspension 9.8123 3.575 Inch 9.8123
Energy Suspension 9.8125 3.925 Inch 9.8125
Energy Suspension 9.8117 4.175 Inch 9.8117
Energy Suspension 9.8118 4.45 Inch 9.8118
Energy Suspension 9.8119 4.915 Inch 9.8119
Energy Suspension 9.8124 5.115 Inch 9.8124
Energy Suspension 9.8149 5.775 Inch 9.8149
Energy Suspension 9.8121 6.00 Inch 9.8121
Footnotes
  • One Set Will Cover the Left and Right Side

Energy Suspension Sway Bar Endlinks

While your sway bar is intended to maximize contact to the road, it can't accomplish this task on its own. Sway bar endlinks are just as important as the sway bar itself. Connecting your sway bar to the rest of the suspension, these endlinks allow the sway bar to perform its task. Should your endlinks wear down or fail completely, you will inevitably feel increased body roll while cornering.

Energy Suspension Sway Bar Endlinks box
Energy Suspension Endlink

Coverage and Performance

OE replacements will undoubtedly come with rubber bushings. While rubber can easily absorb vibrations from the road, it doesn't hold up for long. Crafted using Hyperflex polyurethane bushings and including a brand new set of hardware, Energy Suspension's endlinks are a significant upgrade over OE replacements. The Hyperflex polyurethane bushings are resistant to both chemicals and physical wear, increasing the endlink's durability and performance exponentially. Plus, Energy Suspension covers all of their endlinks with a two-year warranty handled in-house here at DST.

Energy Suspension 9.8118

Product Reviews for Universal Sway Bar End Links 9.8118

5 Star (4)
57%
4 Star (3)
43%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 9.8118

5 out of 5 based on 7 user reviews. Write a Review

C
verified_user

starstarstarstarstar" Review 2 Years Later "

These are in same condition as when I installed them

verified_user Verified Buyer - - . Energy Suspension 9.8118 - 5 out of 5
J
verified_user

starstarstarstarstar_border" Verry good "

I installed these on my 99 Trans am with UMI sway bars. The quality of this par is very good, and it is easy to install. Ive done this many times and it only too me about an hour in total. its not 5/5 only because I have not been to the track to see if they can hold up to the punishment. but so for this is an excellent product.

verified_user Verified Buyer - - . Energy Suspension 9.8118 - 4 out of 5
D
verified_user

starstarstarstarstar" Excellent! "

Worked perfectly. Good price and fast service. Thank You.

verified_user Verified Buyer - - . Energy Suspension 9.8118 - 5 out of 5
P
verified_user

starstarstarstarstar_border" Great Product "

Installed with ease but a bit noisy at slow speed and going over speed bumps but I think that's what you get when you switch from soft stock to polyurethane. At cruising and freeway speed very comfortable and no noise

verified_user Verified Buyer - - . Energy Suspension 9.8118 - 4 out of 5

compare_arrows Compare with Similar Parts


This Part
9.8118 compare
$24.75
Prothane
Prothane compare
$29.31
($4.56) more expensive

question_answer Customer Questions and Answers


Question:
Can I use the 9.8118 on a 2
Answer:
We can not guarantee fitment of the 9.8118 on lowered vehicles unfortunately.