9.5167 | Universal Sway Bar Bushings - 33mm (1.29 inch)

  • 9.5167 360image 1
  • 9.5167 Universal - Greaseable Sway Bar Bushings - 33mm (1.29 inch)
  • 9.5167 Universal - Greaseable Sway Bar Bushings - 33mm (1.29 inch)
  • 9.5167 Universal - Greaseable Sway Bar Bushings - 33mm (1.29 inch)
  • 9.5167 Universal - Greaseable Sway Bar Bushings - 33mm (1.29 inch)
  • 9.5167 Universal - Greaseable Sway Bar Bushings - 33mm (1.29 inch)
  • 9.5167 360image large 1

Universal - Greaseable Sway Bar Bushings - 33mm (1.29 inch)

Manufacturer: Energy Suspension
Part Number: 9.5167

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $25.52

check_box In Stock check_box Ships Immediately


  • 2 - Sway Bar Bushings - Greaseable - (one for each side of the vehicle)
  • 2 - Outer Brackets with Zerk Fitting for Greasing - (one for each side of the vehicle)
Suggested part for 9.5167: grease-gun-combo
grease-gun-combo Grease Gun and Multi-Purpose Grease - Fits Moog Zerk Fittings
Greaseable sway bar bushings do not include lubricant. They are designed to be greased externally using a zerk grease gun. This grease gun is compatible with the zerk fittings, and includes grease.

Suggested part for 9.5167: dll133
dll133 Front Sway Bar Lateral Lock - 31-33mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.

Suggested part for 9.5167: kll133
kll133 Sway Bar Lateral Lock - 31-33mm
Sway Bar Lateral Locks will not only improve the effectiveness of the sway bar, but will also prevent the bar from contacting and damaging other parts of the suspension.

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
FitmentUniversal - Greaseable Sway Bar Bushings - 33mm (1.29 inch) 9.5167 fits these vehicles:
Details
Universal Sway Bar Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

9.5167 | Universal Sway Bar Bushings - 33mm (1.29 inch)

Dimensions 'A' = 1-5/16 in / 33mm
(see picture below)

Universal Sway Bar Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.
Footnotes

Energy Suspension Sway Bar Bushings

Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Energy Sway Bar Bushing
Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Be sure to use Formula 5

The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif
Energy Suspension 9.5167

Product Reviews for 9.5167 | Universal Sway Bar Bushings - 33mm (1.29 inch)

5 Star (9)
90%
4 Star (1)
10%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 9.5167

5 out of 5 based on 10 user reviews. Write a Review

G
verified_user

starstarstarstarstar" Very satisfied "

Excellent product, makes my truck handle a lot better than it did. Easy and simple to install, would definitely recommend any product from here.

verified_user Verified Buyer - - . Energy Suspension 9.5167 - 5 out of 5
P
verified_user

starstarstarstarstar" You provide a great source for OEM quality (better) replacement components. "

I have a 16 year old vehicle that I like to have as a back up vehicle and these components help it to perform when I need it. The replacement bushings fit just the way they are supposed to.

verified_user Verified Buyer - - . Energy Suspension 9.5167 - 5 out of 5
W
verified_user

starstarstarstarstar" Review 1 Year Later very satified "

All the suspension parts work as advertised. Tightened up my truck.

verified_user Verified Buyer - - . Energy Suspension 9.5167 - 5 out of 5
S
verified_user

starstarstarstarstar" Much better bushings than what the factory put on my truck! "

We are very satisfied with these bushings.

verified_user Verified Buyer - - . Energy Suspension 9.5167 - 5 out of 5

Fitment for 9.5167

question_answer Customer Questions and Answers


Question:
With the front sway bar, my measurement with a digital caliper reads 33.53mm yet your universal is either a 33mm or 1 5/16
Answer:
with sway bar bushings its ok to get a .5mm smaller than what you are needing, so a 33mm would probably be your best bet. one thing to also take into consideration is the distance of your mount bolts from each other. greaseable bushings come with h new brackets and you want to make sure these brackets will match up and fit your mounting holes. I'm showing that part number 9.5167 has a min spacing of 2.9 in and a max bolt spacing of 3.90. ...see more

Question:
I'm looking for front stabilizer bushings for an 08 Ford Ranger FX4 The parts supply store says only 27 or 28 mm bushing diameter,mine has 33mm bar?
Answer:
We do offer universal parts that we can try to match to the current ones you have now: https://www.suspension.com/universal-sway-bar-bushings.asp