unarchive In The Box of 11.4101 keyboard_arrow_down
- 2 - 2698 Upper Differential Case Bushing
- 2 - 4247 Cross Member Lower Bushing
- 2 - Center Metal Sleeves
- 1 - Small Formula 5 Prelube Tub
- 1 - Installation Instructions #17493
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
Polyurethane.
Price: $67.02
Warranty: Lifetime Warranty
The 11.4101 is crafted using Energy Suspenion's HyperFlex polyurethane, a much tougher material, ensuring that these bushings will hold up under any stress that your Miata's suspension or drivetrain will put on them.
Energy Suspension 11.4101
Off to a bad start?
I take it you've noticed your Miata is having trouble starting off the line? Maybe you hear banging from the rear end or you feel like your acceleration needs an overall boost? These issues can be fixed by replacing your worn out rear differential bushings with some new polyurethane bushings! Luckily for you, here at DST, we have just the thing!
Laser-Fast Launch
This is Energy Suspension's 11.4101, a complete set of rear differential bushings for 1990 - 2005 Mazda Miata. The old OE bushings are made using a soft rubber that stretches out over time, eventually cracking and rotting away. When this happens your rear differential won't work as efficiently and could be left loose to bang into other parts. The 11.4101 is crafted using Energy Suspension's HyperFlex polyurethane, a much tougher material, ensuring that these bushings will hold up under any stress that your Miata's suspension or drivetrain will put on them. The 11.4101 will effectively lock down your rear differential, keeping it from damaging your vehicle and making your Miata launch even faster! Stocked right here in our Stephenville warehouse the 11.4101 is ready to ship the day you order it!
Product Reviews for Rear Differential Bushings - Mazda Miata - 11.4101
- 5 Star (2)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 11.4101
starstarstarstarstar" Worth the effort. "
I found the old bushings came out easy with the diff still under the car, still attached to the Power Plant Frame. An air hammer (or punch and hammer) drove the stock bushings out. Grease and C-clamp aided in the install. Took less than an hour start to finish. End result was less wheel hop and drive train slop.
verified_user Verified Buyer - Eric Hahn - . Energy Suspension 11.4101 - 5 out of 5starstarstarstarstar
Excellent product, just as advertised and half the cost I could find it for locally.
verified_user Verified Buyer - john scott palmer - . Energy Suspension 11.4101 - 5 out of 5
