16.3110 | Honda Accord Front Control Arm Bushing Replacement Kit

  • 16.3110 360image 1
  • 16.3110 Front Control Arm Bushings
  • 16.3110 Front Control Arm Bushings
  • 16.3110 Front Control Arm Bushings
  • 16.3110 Front Control Arm Bushings
  • 16.3110 Front Control Arm Bushings
  • 16.3110 360image large 1

Front Control Arm Bushings

Manufacturer: Energy Suspension
Part Number: 16.3110


Free Lifetime Warranty Upgrade
Price: $67.74

check_box In Stock check_box Ships Immediately

  • 4 - 2306 - Front Control Arm Bushings
  • 2 - 15.10.302.39 - .750OD X .480ID X 2.040L Center Sleeves
  • 2 - 3289 - Front Control Arm Bushings
  • 8 - 2280 - Front Control Arm Bushings
  • 4 - - .750OD X .406ID X 1.577L Center Sleeves
  • 1 - 17152 - Installation Instructions
  • 1 - 9.11101 - 1/2 Ounce Tube Prelube
Suggested part for 16.3110: 16.8106
16.8106 Front Shock Mount Bushings
The shock mount bushings cover the bushings at the top and bottom of the shock / spring assembly. In this case - that includes the bushings in the center of the lower control arms.

  • Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 16.3110 to 8204
Prothane 8204
Price: $56.54
Warranty: Lifetime Warranty

question_answer Ask us a Question

FitmentFront Control Arm Bushings 16.3110 fits these vehicles:
Polyurethane Front Control Arm Bushings
On the front of vehicles, they make a dramatic improvement in the way they handle with quicker steering response and greater vehicle control.

16.3110 | Honda Accord Front Control Arm Bushing Replacement Kit

Polyurethane Front Control Arm Bushings
  • Maintains proper alignment under extreme conditions on and off road and during competition.
  • Improves vehicle handling, cornering and overall control
  • Full floating, for smoother operation.
  • Made of Energy's HYPER FLEX performance polyurethane to add performance and durability
  • One Set Will Cover the Left and Right Side

HyperFlex Control Arm Bushings

A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.

Energy Suspension Control Arm Bushing
Energy Suspension Control Arm Bushing

The Faulty O.E.

As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.

Be sure to use Formula 5

A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif

compare_arrows Compare with Similar Parts

This Part
16.3110 compare
  • star_borderstar_borderstar_borderstar_borderstar_border
  • This part
  • Bushing Material: Polyurethane
Prothane compare
($11.20) cheaper
  • star_borderstar_borderstar_borderstar_borderstar_border
  • Bushing Material: Polyurethane