unarchive In The Box of 16.3119 keyboard_arrow_down
- 4 - 2573 lower control arm bushing outer.
- 2 - 2574 lower control arm bushing center.
- 2 - 15.10.225.39 lower control arm sleeve.
- (7/8"O.D. x .480� I.D. x 2.230")
- 4 - 3439 upper control arm bushing.
- 4 - 15.10.408.39 upper control arm sleeve.
- (7/8"O.D. x 406� I.D. x 1.875�LG)
- 3 - 9.11101 grease.
- 1 - 17415 installation instructions.
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
question_answer Customer Questions and Answers
- Question:
- Is 16.3119 for the upper or lower control arms?
- Answer:
- Part number 16.3119 control arm bushings will cover the upper and lower control arms.
- Question:
- In kit number 16.3119 what are the dimensions of the sleeves for the upper and lower control arm bushings?
- Answer:
- For kit number 16.3119, the upper control arm bushings inner sleeves are .875OD x .480ID x 2.230L inches and the lower control arm bushings inner sleeves are .875OD x .406ID x 1.875L inches
