unarchive In The Box of 2.18107 keyboard_arrow_down
- Kit 2.3106 - Front Control Arm Bushings Set
- 4 of 3300 Lower Control Arm Bushings
- 4 of 3301 - Lower Control Arm Bushings
- 4 of 15.10.237.39 - Metal Sleeves - 7/8" x 9/16" x 2.600"
- 4 of 3354 - Upper Control Arm Bushings
- 2 of 3353 - Upper Control Arm Bushings
- 1 of 3362 - Upper Control Arm Bushings
- 1 of 3363 - Upper Control Arm Bushings
- 4 of 15.10.243.39 - Metal Sleeves - 3/4" x .406" x 2.038"
- Kit 2.3107 - Rear Control Arm Bushings Set
- 4 of 3300 - Lower Control Arm Bushings
- 4 of 3301 - Lower Control Arm Bushings
- 4 of 15.10.237.39 - Metal Sleeves - 7/8" x 9/16" x 2.600"
- 4 of 3354 Upper Control Arm Bushings
- 4 of 3352 - Upper Control Arm Bushings
- 4 of 15.10.243.39 - Metal Sleeves - 3/4" x .406" x 2.038"
- Kit 2.6101 - Front Spring Isolators Set
- 2 of 6112 - Spring Isolators
- Kit 2.9101 - Front and Rear Bump Stop Set
- 4 of 6113 - Bump Stops
- Kit 2.5110 - Front Sway Bar Bushings Set
- 2 of 5348 - 30mm Ssway Bar Bushings
- 2 of 15.12.06.39 - Sway Bar Brackets Assemblies
- 2 of 8043 - End Link Bushings
- 2 of 15.10.251.39 - Metal Sleeves - 5/8" x 1/2" x 1.300"
- Kit 2.5111 - Rear Sway Bar Bushings Set
- 2 of 5333 - 16mm Sway Bar Bushings
- 2 of 15.12.06.39 - Sway Bar Brackets Assemblies
- 4 of 15.03.23.39 - THK - .702" x .402" x .090"
- 4 of 8217 - End Link Bushings
- Kit 2.7102 - Front Track Arm Bushings Set
- 2 of 7039 - Track Arm Bushings
- 1 of 15.10.112.39 - Metal Sleeve - 5/8" x 7/16" x 1.600"
- 1 of 13001 - Tie Rod Boot
- Kit 2.7103 - Rear Track Arm Bushings Set
- 4 of 7087 - Track Arm Bushings
- 2 of 15.10.233.39 - Metal Sleeves - 7/8" x 1/2" x 1.600"
- Kit 2.4107 - Body Mount Set
- 6 of 4183 - Upper Body Mount
- 6 of 4184 - Lower Body Mount
- 5 of 5185 - Upper Body Mount
- 5 of 4186 - Lower Body Moun t
- 2 of 6182 - Front Grill Bumper
- 6 of 15.03.49.39 - Flat Washers - 2 1/2" x 1/2"
- 5 of 15.03.09.39 - Flat Washers - 2" x 7/16"
- Kit 9.13101 - Tie Rod Boot Set
- 2 of 13001 - Tie Rod Boots
add_shopping_cart Suggested Parts 8keyboard_arrow_down
Not Included in Hyperflex Kit
Fits 6 Cylinder Models Only
DST Silver Color - Limited Lifetime Warranty
Whiteline Gold Color Plated - 3 Year Warranty
DST Silver Color - Limited Lifetime Warranty
Whiteline Gold Color Plated - 3 Year Warranty
3 - 5ML High Performance Grease by Energy
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension HyperFlex Package Kit
Thinking about changing a bushing? Why not replace them all? Energy Suspension Master Kits include the bushings you need to completely revamp your suspension. Positions and parts vary from vehicle to vehicle, but each package contains the bushings that Energy Suspension offers.
Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration and harshness), but most drivers prefer the boost in performance in spite of that. Replacing the entirety of your suspension bushings maximizes your handling and ensures it stays that way for a long time.
Replacing the Faulty Rubber
O.E. Manufacturer's use of soft rubber bushings when making a car. This is great for dampening noise and vibrations, but not so great for performance or longevity. Once the rubber fails, that quiet and smooth ride will fail as well. Rubber is prone to failure due to wear and tear, UV rays, road grimes, and vehicle oils.
Be sure to use Formula 5
This Package will come with plenty of Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. So be sure to use more than enough lubricant when upgrading your suspension bushings. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 2.18107 | Complete Suspension Bushing Kit | Jeep TJ 1997-2006
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 2.18107
starstarstarstarstar" Very impressed with the quality of ride. "
Much easier to install then buying OEM replacements, requiring you to press old bushings out and new ones in. All parts were labeled very well and instructions were very easy to follow.
verified_user Verified Buyer - Danny Schlosser - . Energy Suspension 2.18107 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- In the instructions it states: To grease apply light coat of grease to the I.D. of the shell and other various parts. I was wondering what grease it calls for.
- Answer:
- You would use Part number# 911110, Energy Suspension Formula 5 Prelube is a versatile, waterproof, non-melting grease. Formula 5 Prelube made by Energy Suspension forms a tough, durable, chemical resistant bushing lube film. This bushing lube can be used for any polyurethane or rubber bushings, or even metal components . Using it as a bushing lube when installing your new parts prevents metal-to-metal contact even under severe shock loads. Only a small amount of Formula 5 Prelube is required to properly lubricate bushings and metal components. The same amount of bushing lube can also prevent corrosion. ...see more
- Question:
- Am I supposed the grease the body mount bushings?
- Answer:
- Since cab/body mounts are stationary they do not require grease.