unarchive In The Box of 3.18113 keyboard_arrow_down
- Transmission mount: (3.1108)
- 1 - 1036 mount
- 1 - 15.08.10.39 backing plate
- 2 - 15.03.48.39 (7/16" lockwasher)
- 4 - 15.03.42.39 (7/16" flat washer)
- 2 - 15.05.30.39 (7/16"-14 x 1" bolt)
- 1 - 17112 installation instructions
- Front control arm bushing set:
- (3.3101, 3.3172)
- 2- 15.12.10.xx 3008 ?B? shell assembly Lwr. Rear Pos.) 1-15.02.02.39 ?B? shell, 1-3008 bushing, 1-15.10.10.39 sleeve (3/4?x1/2?x2.4?)
- 2-15.12.09.xx 3006 ?A? shell assembly Lwr. Frt. Pos.) 1-15.02.01.39?A? shell. 1-3006 bushing, 1-15.10.10.39 sleeve (3/4?x 1/2?x 2.4?)
- 2- 15.12.21.xx 3032 ?S27H? shell assembly Lwr. rear Pos.) 1- 15.02.27.39 oval shell, 1-3032 bushing, 1-15.10.10.39(3/4?x 1/2?x 2.4?)
- 4- 15.12.08.xx 3001 ?E? shell assembly (UpperControl Arms) 1-15.02.05.39?E? shell, 1- 001 bushing, 1- 15.10.11.39 (13/16?x .675?x 1.562?)
- 2 - 9.11108 grease.
- 1 - 17444 installation instructions
- Rear control arm bushing set: (3.3132)
- 8 - 15.02.09.39 ?I? shell
- 8 - 3021 bushing
- 8 - 15.10.10.39 (3/4"O.D. x 1/2"I.D. x 2.425 sleeve)
- 6 - 3087 thrust washer
- 6 - 3088 thrust washer
- 2 - 3089 thrust washer
- 1 - 9.11101 grease.
- 1 - 17019 installation instructions
- 1 - 17041 installation instructions
- Body mount set (3.4114, 3.4115)
- 8 - 4045 Positions 1,2,4,6
- 8 - 4042 Positions 1,2,4,6
- 4 - 4040 Positions 3,5
- 6 - 4041 Positions 7 (4,6*)
- 6 - 4044 Positions 7 (4,6*)
- 1-17022 Installation instructions (Non Convertible)
- 1-17021 Installation instructions (Convertible)
- Rear spring isolator set: (3.6108)
- 2 - 6138
- Front Swaybar endlink set:
- (9.8118)
- 8 - 4806 endlink grommets
- 2 - 15.10.23.39 (9/16"O.D. x 3/8"I.D. x 2.90 sleeve)
- 8 - 15.03.01.39 (cupped washer)
- 2 - 15.05.04.39 (3/8"-16 x 7" bolt)
- 2 - 15.07.01.39 (3/8"-16 nut)
- Tie-rod boot set: (9.13101) 2 SETS
- 4 - 13001 tie-rod boot set
- Ball-joint boot set: (9.13125)
- 2 - 13009
- 2 - 13010
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension HyperFlex Package Kit
Thinking about changing a bushing? Why not replace them all? Energy Suspension Master Kits include the bushings you need to completely revamp your suspension. Positions and parts vary from vehicle to vehicle, but each package contains the bushings that Energy Suspension offers.
Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration and harshness), but most drivers prefer the boost in performance in spite of that. Replacing the entirety of your suspension bushings maximizes your handling and ensures it stays that way for a long time.
Replacing the Faulty Rubber
O.E. Manufacturer's use of soft rubber bushings when making a car. This is great for dampening noise and vibrations, but not so great for performance or longevity. Once the rubber fails, that quiet and smooth ride will fail as well. Rubber is prone to failure due to wear and tear, UV rays, road grimes, and vehicle oils.
Be sure to use Formula 5
This Package will come with plenty of Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. So be sure to use more than enough lubricant when upgrading your suspension bushings. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 3.18113 | Complete Suspension Bushing Kit | Chevelle 1968-1972
- 5 Star (4)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 3.18113
starstarstarstarstar" Review 1 Year Later "
Parts are working like expected. Would purchase again.
verified_user Verified Buyer - Thomas Casper - . Energy Suspension 3.18113 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
Parts are working like expected. Would purchase again.
verified_user Verified Buyer - Thomas Casper - . Energy Suspension 3.18113 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
Everything has been great. No issues to report. Thank you.
verified_user Verified Buyer - Michael Smolinski - . Energy Suspension 3.18113 - 5 out of 5starstarstarstarstar" great product! "
The product is excellent. Every thing fits and installation instructions were adequate.
verified_user Verified Buyer - Fred Godbout - . Energy Suspension 3.18113 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Will this body mount kit in the complete bushing kit 3.18113 include the body mounts for the 2 door hard top coupe 72 Chevelle?
- Answer:
- Kit number 3.18113 will include the body mounts for both the 2 door hard top, and 2 door convertible 72 Chevelle. as well as the Front Control arm bushings, Front endlinks, Transmission mount, ball joint dust boots, tie rod dust boots, rear control a arm bushings, and read coil spring isolators. ...see more
- Question:
- Will part number 3.18113 fit a 1968 Chevrolet Impala?
- Answer:
- No, part number 3.18113 will not fit a 1968 Chevrolet Impala.
- Question:
- Does the radiator support bushings come in the Hyper Flex master kit part number 3.18113?
- Answer:
- Yes the radiator support bushings do come in the Hyper Flex master kit part number 3.18113.