description Installation Instructions keyboard_arrow_down
- picture_as_pdfControl Arm Bushings Instructions
- picture_as_pdfSway Bar and Track Bar Greasing
- picture_as_pdfCam Bolt Bushing Instructions
- picture_as_pdfEndlink Bushings Installation
- picture_as_pdfTransmission Mount
- picture_as_pdf3.18123 Parts List
- picture_as_pdfSway Bar Endlinks
- picture_as_pdfRear Strut Bushings
- picture_as_pdfSteering Rack Bushings
unarchive In The Box of 3.18123 keyboard_arrow_down
- Transmission mount: set: 3-1108
- 1 - 1036 mount
- 1 - 15.08.10.39 backing plate.
- 2 - 15.03.48.39 (7/16" lock washer)
- 4 - 15.03.42.39 (7/16" flat washer)
- 2 - 15.05.30.39 (7/16"-14 x 1" bolt)
- 1 - 17112 installation instructions.
- Power steering ram bushing set: 3-10102
- 2 - 8052 bushings
- 1 - 15.10.152.39 (.500"O.D. x .375"I.D. x 1.125? sleeve)
- 2 - 15.03.01.39 (1.250"O.D. x .375" I.D. Cup washer)
- 1 - 15.08.87.40 (1/6?Dia. X 3/4? Lg. Cotter pin)
- 1 - 15.07.22.40 (3/8-24 slotted nut)
- 1 - 17361 installation instructions.
- Front control arm bushing set: 3-3108
- 4 - 3001 bushings (upper positions)
- 4 - 15.10.11.39 (.813"O.D. x .675"I.D. x 1.562" sleeve)
- 4 - 15.02.05.39 "E" shells (1.064 length)
- 4 - 3002 bushings (lower positions)
- 4 - 15.10.184.39 (.875"O.D. x .750"I.D. x 1.900" sleeve)
- 4 - 15.02.10.39 "J" shells (1.390 length)
- 1 - 17019 installation instructions
- Rear control arm bushing set: 3-3122: Must reuse the outer metal shell
- 4 - 3044 bushings
- 2 - 15.10.61.39 (.750"O.D. x .437?I.D. x 2.000"sleeve)
- 4 - 15.03.13.39 (1.750" O.D. x .437? I.D. washer)
- Use - 17019 installation instructions
- Rear spring cushion set: 3.2104
- 4 - 4012
- Differential mount set: 3-1101
- 1 - 4046 bushing
- 1 - 4047 bushing
- Ball joint boot set: 9-13125
- 2 - 13009 ball joint boots
- 2 - 13010 ball joint boots
- Tie-rod boot set: 2 EA 9-13101
- 4 - 13001 tie-rod boots
- Grease:
- 3 - 9.11101 grease tubs
- Rear strut arm bushing set: 3-7101 or 3-7102 there are two different sizes of strut rods. You must determine which size you have.
- 8 - 7005 bushings (for vehicles with 1-1/2? O.D. Rod end)
- 8 - 7115 bushing (for vehicles with 1-3/4? O.D. Rod end)
- 4 - 15.10.53.39 (.875"O.D. x .625?I.D. x 1.675" sleeve)
- 4 - 15.03.99.39 (1.295?O.D. X .500? cap washers)
- 2 - 15.08.88.40 (1/8?Dia. X 1-1/4?lg cotter pin)
- 1 - 17326 installation instructions
- Front sway bar end link bushing set: 9-8120
- 8 - 4806 end link grommets
- 8 - 15.03.01.39 (cupped washers)
- 2 - 15.10.22.39 (.563"O.D. x .375?I.D. x 1.650" sleeve)
- 2 - 15.05.02.39 (3/8"-16 x 5-1/2" bolt)
- 2 - 15.07.01.40 (3/8"-16 nut)
- Rear sway bar and end link bushing set: 3-5153
- 2 - 5001 (7/16" bushing)
- 2 - 15.08.01.39 bushing bracket
- 4 - 15.03.23.39 (.702"O.D. x .402" I.D. washer)
- 4 - 4904 end link grommets
- 4 - 15.10.92.39 (.563"O.D. x .375"I.D. x .800? sleeve) vehicles with 1-3/4? O.D. Rod end)
- 1 - 17056 installation instructions
add_shopping_cart Suggested Parts 5keyboard_arrow_down
63-69 Models
73-82 Models
There are multiple size sway bars in this model. You will need to measure your sway bar in order to determine which set you need.
3 - 5ML High Performance Grease by Energy
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
Polyurethane.
Price: $284.55
Warranty: Lifetime Warranty
Energy Suspension HyperFlex Package Kit
Thinking about changing a bushing? Why not replace them all? Energy Suspension Master Kits include the bushings you need to completely revamp your suspension. Positions and parts vary from vehicle to vehicle, but each package contains the bushings that Energy Suspension offers.
Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration and harshness), but most drivers prefer the boost in performance in spite of that. Replacing the entirety of your suspension bushings maximizes your handling and ensures it stays that way for a long time.
Replacing the Faulty Rubber
O.E. Manufacturer's use of soft rubber bushings when making a car. This is great for dampening noise and vibrations, but not so great for performance or longevity. Once the rubber fails, that quiet and smooth ride will fail as well. Rubber is prone to failure due to wear and tear, UV rays, road grimes, and vehicle oils.
Be sure to use Formula 5
This Package will come with plenty of Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. So be sure to use more than enough lubricant when upgrading your suspension bushings. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 3.18123 | Complete Suspension Bushing Kit | Corvette 1963-1982
- 5 Star (3)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 3.18123
starstarstarstarstar" I like these kits, easy to use, and proffessional looking as well as durable. "
Makes life easy when you want to change bushings, having everything available. I like the look of the red bushings so I usually go with that. They install as they should and out perform regular manufactured bushings. The over all look of the job is easy to spot and professional in appearance, making the customer feel they received value when the see the finished product. We enjoy having everything you need in one order, it saves time looking each part up individually.
verified_user Verified Buyer - James D Weedmark - . Energy Suspension 3.18123 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
These are so much easier to install than OEM ONE PIECE bushings. Fit great. Car is super tight. Do not notice any harsher ride than with OEMs. I will only use OEM Bushings on top quality restorations. For all other bushing replacements, this is the way to go.
verified_user Verified Buyer - Ed Gajewski - . Energy Suspension 3.18123 - 5 out of 5starstarstarstarstar" Just perfect "
Everything as described and expected, fitment superb, and looks great too! I think I don`t need to say that the handling improved dramatically. Thanks a lot Energy Suspension!
verified_user Verified Buyer - Vedran Jagnjic - . Energy Suspension 3.18123 - 5 out of 5compare_arrows Compare with Similar Parts
($79.99) cheaper
- star_borderstar_borderstar_borderstar_borderstar_border
- Bushing Material: Polyurethane
question_answer Customer Questions and Answers
- Question:
- I am looking for a rear suspension kit for my corvette! I am want the rubber bushings over the polyurethane bushings. Do you have that available?
- Answer:
- Moog does not make all the rubber bushings for your Vette. The only Moog bushings are moog-k304 front lower control arm bushings, moog-k5196 upper control arm bushings and moog-k200921 rear control arm bushings.
- Question:
- what the g stand for in the master kit 3.18123g
- Answer:
- The G stands for graphite which is black. It is used to identify the color of the bushings nothing more.
- Question:
- Will part number 3.18123 fit my 1978 corvette?
- Answer:
- Yes, part number 3.18123 will fit the 1978 corvette.
- Question:
- is it press fit or shrink fit on those bushings that need it ?
- Answer:
- Bushings like control arms would need to be pressed in.
