3.18130 | Complete Suspension Bushing Kit | Camaro 1993-2002

  • 3.18130 Complete Suspension Bushing Kit - Chevrolet Camaro and Pontiac Firebird/Trans Am 93-02
  • 3.18130 Complete Suspension Bushing Kit - Chevrolet Camaro and Pontiac Firebird/Trans Am 93-02

Complete Suspension Bushing Kit - Chevrolet Camaro and Pontiac Firebird/Trans Am 93-02

Manufacturer: Energy Suspension
Part Number: 3.18130

Color: (?)
Black
Red

Include Free Prelube?: (?)
Extra Prelube - FREE

Exclusive for DST Customers: (?)
Free Lifetime Warranty Upgrade
Price: $248.31

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Torque arm mount bushing set: 3.1111
  • 1 - 1040 bushing
  • 1 - 17126 installation instructions
  • Front end control arm bushing set: 3.3164
  • 2 - 3261 lower control arm pivot bushing, horizontal position thrust washer
  • 2 - 3262 lower control arm pivot bushing, horizontal position
  • 2 - 3263 lower control arm pivot bushing, vertical position center
  • 2 - 3264 lower control arm pivot bushing, vertical position upper
  • 2 - 3265 lower control arm pivot bushing, vertical position lower
  • 4 - 3266 upper control arm pivot bushing
  • 4 - 15.10.137.39 (3/4"O.D. x .480" I.D. x 1.570 sleeve)
  • 1 - 17138 installation instructions
  • Rear end control arm bushing set: 3.3136
  • 4 - 15.12.07.* lower control arm pivot bushing assembly
  • (3021 bushing / 15.02.09.39 "I" shell / 15.10.10.39
  • (3/4"O.D. x 1/2"I.D. x 2.425 sleeve)
  • 4 - 3232 thrust washers.
  • 1 - 17041 installation instructions
  • use 17019 installation instructions
  • Rear panhard bar bushings set: 3.7106
  • 4 - 2042 pivot bushing
  • 2 - 15.10.101.39 (3/4"O.D. x 9/16"I.D. x 1.875 sleeve)
  • 1 - 17039 installation instructions
  • Front swaybar bushings: 3.5163
  • 2 - 5288 bushings (30mm I.D.)
  • use 17039 installation instructions
  • Front Swaybar end link set : 9.8118
  • 2 - 15.12.02.* End link assembly
  • Note: 1 assembly has 4 4806
  • use 17039 installation instructions
  • bushing, 1ea
  • 15.10.23.39 sleeves, 4ea 15.03.01.39 washers,
  • 1ea 15.05.04.39 bolt, 1ea 15.07.01.40 nut.
  • Rear swaybar and endlink bushing set: 3.5161
  • 2 - 5335 bushings (19mm)
  • 2 - 15.12.06.39 bushing bracket
  • 4 - 15.03.23.39 flat washer
  • 8 - 4806 endlink grommets
  • 2 - 15.10.63.39 (9/16"O.D. x 3/8"I.D. X 2.200 sleeve)
  • 8 - 15.03.01.39 (cupped washer)
  • 2 - 15.05.03.39 (3/8"-16 x 6" bolt)
  • 2 - 15.07.01.40 (3/8"-16 nut)
  • 1 - 17145 installation instructions
  • use 17039 installation instructions
  • Tie-rod boot sets: 9.13101
  • 2 - 13001 tie-rod boot set
  • Grease: Formula 5 Prelube.
  • 3 - 9.11101 grease tubs.
  • (See our catalog for more details).
Suggested part for 3.18130: dll130
dll130 Front Sway Bar Lateral Lock - 28-30mm
DST Silver Color - Limited Lifetime Warranty

Suggested part for 3.18130: kll130
kll130 Sway Bar Lateral Lock - 28-30mm
Whiteline Gold Color Plated - 3 Year Warranty

Suggested part for 3.18130: dll120-rear
dll120-rear Rear Sway Bar Lateral Locks - 19-20mm
DST Silver Color - Limited Lifetime Warranty

Suggested part for 3.18130: kll120
kll120 Sway Bar Lateral Locks - 19-20mm
Whiteline Gold Color Plated - 3 Year Warranty

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 3.18130 to 72008
Prothane 72008
Polyurethane.
Price: $272.98
Warranty: Lifetime Warranty

FitmentComplete Suspension Bushing Kit - Chevrolet Camaro and Pontiac Firebird/Trans Am 93-02 3.18130 fits these vehicles:
Details
Hyperflex Master System Kit
It's Energy's System To Get The Very Maximum In Performance and Durability From Your Vehicle!

3.18130 | Complete Suspension Bushing Kit | Camaro 1993-2002

1993 - 2002 Chevrolet Camaro
1993 - 2002 Pontiac Firebird / Trans Am, Except 1LE Suspension Option
Includes:
  • Front Control Arm Bushings - 3.3164
  • Front Sway Bar Bushings 30mm - 3.5163
  • Front End Link Set - 9.8118
  • Torque Arm Mount - 3.1111
  • Tie Rod End Boots - 9.13101
  • Rear Control Arm Bushings - 3.3136
  • Rear Sway Bar and Endlink Bushings 19mm - 3.5161
  • Rear Panhard Bar Bushings - 3.7106
Performance Polyurethane Master Bushing Sets
  • Get real performance, for both on the road and off.
  • Popular performance car, truck and SUV applications.
  • A real must for competition use, or just for that "seat-of-the-pants" fun!
  • Increases vehicle stability and control as well as durability.
  • Reduces wheel hop and traction loss.
  • Proven for many years, by both professional and amateur racers alike.
  • Both restores and improves better than new!
  • Made of Energy's HYPER FLEX performance polyurethane.
  • Heavy duty metal components are used, for increased strength, when applicable
Footnotes
  • One Set Will Cover the Left and Right Side

Energy Suspension HyperFlex Package Kit

Thinking about changing a bushing? Why not replace them all? Energy Suspension Master Kits include the bushings you need to completely revamp your suspension. Positions and parts vary from vehicle to vehicle, but each package contains the bushings that Energy Suspension offers.

Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration and harshness), but most drivers prefer the boost in performance in spite of that. Replacing the entirety of your suspension bushings maximizes your handling and ensures it stays that way for a long time.

Energy Hyperflex Master Kit
Energy Hyperflex Master Kit Rubber

Replacing the Faulty Rubber

O.E. Manufacturer's use of soft rubber bushings when making a car. This is great for dampening noise and vibrations, but not so great for performance or longevity. Once the rubber fails, that quiet and smooth ride will fail as well. Rubber is prone to failure due to wear and tear, UV rays, road grimes, and vehicle oils.

Be sure to use Formula 5

This Package will come with plenty of Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. So be sure to use more than enough lubricant when upgrading your suspension bushings. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Master Kit Formula 5 Gif
Energy Suspension 3.18130

Product Reviews for 3.18130 | Complete Suspension Bushing Kit | Camaro 1993-2002

5 Star (1)
33%
4 Star (2)
67%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar_border

Energy Suspension 3.18130

4 out of 5 based on 3 user reviews. Write a Review

D
verified_user

starstarstarstarstar" Review 2 Years Later "

The kit is performing great. Install was relatively easy if done before.

verified_user Verified Buyer - - . Energy Suspension 3.18130 - 5 out of 5
K
verified_user

starstarstarstarstar_border" Good quality kit "

This is a good quality kit. It has made a noticeable improvement in the handling of my car. I was expecting a harsher ride, but it is better now than ever. One suggestion to help with the removal of the OEM rubber pieces is to use a 1/4" drill bit to drill out most of the rubber, then press out the center tube from the shell. It was then easy to slice and wire brush the remaining rubber off of the tubes that needed to be reused. I noticed that the rear sway bar bolts were a bit on the short side, and I had to rig up a woodworking clamp to hold everything together to get the nut started. Also, this kit does not include the transmission mount, engine mounts, or the rear axle bump stops. All of which were also in bad shape in my car. In my opinion, the transmission mount should be included in this kit. The torque arm mount piece is included, and bolts to the side of the tailshaft of the transmission. However, if your transmission mount is rotted/torn (as many of these are - weak design from the factory) the rear of your transmission will move around due to the forces torque arm is exerting on it. For the transmission mount and engine mounts, simply order them separately - I just received mine, on a second follow-up order. Now I need to get back under the car and get those installed. For the rear bump stops, order part number 9.9137, then simply slot the holes in the bonded-in steel mounting plate about 0.40" sideways to allow them to bolt in (without having to cut your car). I used a milling machine to make the cuts, but a round file would also work. It would be simple for ES to make an alternate mounting plate with sideways slots that would work great in this application. One final note, If someone is taking the time to install this entire kit, and knowing how long these parts will last, I would suggest using all stainless steel hardware or at a minimum using a heavy chrome plate on all the steel parts, including the parts that get cast in to the urethane.

verified_user Verified Buyer - - . Energy Suspension 3.18130 - 4 out of 5
P
verified_user

starstarstarstarstar_border" good "

Great parts, only thing is I wish they would have come with all new washers and hard parts, would make changing a lot easier.

verified_user Verified Buyer - - . Energy Suspension 3.18130 - 4 out of 5

compare_arrows Compare with Similar Parts


This Part
3.18130 compare
$248.31
Prothane
Prothane compare
$272.98
($24.67) more expensive

question_answer Customer Questions and Answers


Question:
How much shipping weight?
Answer:
The shipping weight on this item is 11.556 lbs. Depending on where we are shipping to will determine how much shipping cost is.

Question:
Do you provide any installation video online?
Answer:
Unfortunately, Energy does not have any installation videos.