unarchive In The Box of 3.3190 keyboard_arrow_down
- 4 - 3426 - Upper Bushings
- 2 - 3375 - Lower Front Bushings
- 2 -15.10.413.39 - Lower Front Sleeve 1.00Inch O.D. X .640Inch I.D. X 2.950Inch LG
- 2 - 3376 - Lower Rear Bushings
- 2 - 15.10.414.39 - Lower Rear Sleeve 1.00Inch O.D. X .640Inch I.D. X 3.860Inch LG
- 2 - 8319 - Lower Shock Bushings, Front Casting Side
- 2 - 8320 - Lower Shock Bushings, Rear Machine Side
- 2 - 15.10.523.39 - Lower Shock Sleeve 1.00Inch O.D. X .563Inch I.D. X 1.340Inch LG
- 4 - 15.07.25.40 - Lock Nut for Lower Control Arm Bolts 16MM X 2.00MM
- 8 - 9.11108 - Grease
- 1 - 17440 - Installation Instructions
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 3.3190 | Silverado 1500 Front Control Arm Bushing Replacement
- 5 Star (7)
-
-
- 78%
-
- 4 Star (1)
-
-
- 11%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (1)
-
-
- 11%
-
Energy Suspension 3.3190
starstar_borderstar_borderstar_borderstar_border" Not Favorable "
Kit was incomplete and did not contain any 3375 Front Lower Control Arm Bushings...My Bushing Nightmare is now into the 5th week. I was told to provide pics of the incomplete kit, but its 30 miles away at the machine shop. Im Thrilled. Of Course no separate 3375 are available, so i need to buy another $$$Kit. Editors Note: Customer decided to send the kit back instead of DST taking care of the miss packed kit. Because of the circumstances we send a return label and refunded the customer in full.
verified_user Verified Buyer - Roger Bensenhaver - . Energy Suspension 3.3190 - 1 out of 5starstarstarstarstar" Review 1 Year Later "
The bushings work great and have had no issues with them. I will be upgrading the complete rear spring set soon.
verified_user Verified Buyer - Joshua Jimenez - . Energy Suspension 3.3190 - 5 out of 5starstarstarstarstar_border" good "
Parts fit well as expected not sure long life will be there due to nature of construction I am doing a frame off restoration and 4" lift for a customer and dont want problems after completion guess we will see easy to install.
verified_user Verified Buyer - Fred Johnson - . Energy Suspension 3.3190 - 4 out of 5starstarstarstarstar" Review 1 Year Later "
The bushings work great and have had no issues with them. I will be upgrading the complete rear spring set soon.
verified_user Verified Buyer - Joshua Jimenez - . Energy Suspension 3.3190 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Does this kit do both the upper and lower control arms for both the driver and passenger sides?
- Answer:
- One Set Will Cover the Left and Right Side, Must Reuse All Metal Parts,Fits Models with Torsion Bar Front Suspension
- Question:
- Do I need to reuse the outer shells of my stock bushings with the polyurethane kit 3.3190?
- Answer:
- The 3.3190 will require you to reuse your Upper control arm outer metal shells, but the lower control arms will require you to press the outer shell out and not reuse it. Here is a link to the install instructions https://www.energysuspensionparts. .com/installation_instructions/energy_suspension/17440.pdf ...see more
- Question:
- the kit 3.3190 includes the lower shock bushing
- Answer:
- yes, it does include the lower shock bushings.
- Question:
- How do you get the rubber out so I can install the kit 3.3190R?
- Answer:
- Check out our blog https://www.suspension.com/blog/how-to-burn-out-suspension-bushings-the-right-way/ give you step by step instruction on how to get you rubber out to reuse you outer sleeves to put the kit 3.3190 in your vehicle.
- Question:
- How do I know if I have the torsion bar suspension or not for part number 3.3190?
- Answer:
- If you check under your vehicle and you do not see any coil springs, you will have the torsion bar suspension.
- Question:
- In the kit 3.3190 will it work for the upper or lower for the 2006 Yukon Denali 1500 xl?
- Answer:
- The kit 3.3190 will work on both upper and lower for the 2006 Yukon Denali 1500 xl.
- Question:
- Are the parts included for both front control arms in kit 3.3190G or do I need to order two kits to complete both control arms of the vehicle?
- Answer:
- Energy front control arm kit 3.3190 included the left and right upper/lower control arm bushings. One kit is all you need.