unarchive In The Box of 3.4132 keyboard_arrow_down
- 12 - 4067 with Molded in metal Ring
- 12 - 4068
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension HyperFlex Body to Frame Mount Bushings
Energy Suspension's Hyperflex polyurethane is a stronger material for a body to frame mount bushing. Polyurethane is able to handle the constant beating a body mount takes and is not vulnerable to road grime or UV rays. With Energy Suspension's body mounts, you can protect your body to frame attachment, and your smooth ride, for years to come.
Replacing the Faulty Rubber
O.E. Manufacturer's use soft rubber body mounts to attach a body and frame. Over time these bushings deteriorate due to wear and tear, UV rays or road grime. Once the rubber starts to fail, the attachment point is compromised and the bushing can literally just fall off. Without body to frame mount bushings, the smooth connection between your body and frame is gone and your smooth ride is gone with it. Now bumps and potholes will really put your seatbelt to work.
Product Reviews for Body Mount Bushings Kit - GMC Typhoon 4WD - 3.4132
- 5 Star (4)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 3.4132
starstarstarstarstar" Review 1 Year Later "
Everything fit great like it should! Would highly recommend.
verified_user Verified Buyer - james m loiudice jr - . Energy Suspension 3.4132 - 5 out of 5starstarstarstarstar" Very Good "
I had a popping noise whenever I went around a turn and replaced everything in the front end just to find out, that was not it. I took my ZR2 Blazer to the local Chevy Stealership and they told me its the body mount bushings. They were going to charge me around $800 just for the new rubber bushings alone, without installation!\nThe Poly bushing kit is much better quality at a fraction of the price, and a true direct fit replacement, no fabbing required. It fixed my problem, no more popping noise, and the overall ride quality feels better now too.\nAwesome product, You cant often say something is Cheaper and Better than stock!\n
verified_user Verified Buyer - David Becker - . Energy Suspension 3.4132 - 5 out of 5starstarstarstarstar" good "
Liked them, they fit, no problems.
verified_user Verified Buyer - david c murphy - . Energy Suspension 3.4132 - 5 out of 5starstarstarstarstar" great "
Had installed a week after receiving the parts and have not had any problems.
verified_user Verified Buyer - carman jones - . Energy Suspension 3.4132 - 5 out of 5compare_arrows Compare with Similar Parts
question_answer Customer Questions and Answers
- Question:
- Do you have a hardware kit for the body mount bushing kit?
- Answer:
- If you have the S10 Blazer 4 door: DHW002 would be the correct kit If you have the S10 Blazer 2 door: DHW023 would be the correct kit
- Question:
- Do I need to apply energy suspension lube to the body mount bushing or do I install without lubing part number 3.4132?
- Answer:
- You do not need to grease part number 3.4132 before installation.
- Question:
- Do you offer a hardware kit for 3.4132 for my 96 Olds Bravada?
- Answer:
- No, we do not offer a hardware kit for the 3.4132 for the 96 Olds Bravada.
- Question:
- Hey. Does this body mount bushing kit come with the big steel washers that go on the very bottom right under the bolt head? Mine are rusted completely out and have pulled through.
- Answer:
- If your hardware is unusable you would have to purchase it somewhere else.