unarchive In The Box of 3.5138 keyboard_arrow_down
- 2 of 5120 - Sway Bar Bushings
- 2 of 3282 - Bushings
- 2 of 8029 - Bushings
- 4 of 8030 - Bushings
- 4 of 112 - Metal Sleeves
- 1 of 9311108 - Grease Packet
add_shopping_cart Suggested Parts 2keyboard_arrow_down
3 - 5ML High Performance Grease by Energy
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
Polyurethane.
Price: $21.91
Warranty: Lifetime Warranty
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 3.5138 | Front Sway Bar Bushings - 24 mm | Chevrolet Corvette
- 5 Star (1)
-
-
- 50%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (1)
-
-
- 50%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 3.5138
starstarstarstarstar" Review 2 Years Later "
The best parts I have put on corvette for front-end control.
verified_user Verified Buyer - Steve Hamrick - . Energy Suspension 3.5138 - 5 out of 5starstarstarstar_borderstar_border" Good quality parts with good instructions "
I have installed the bushings onto my sway bar using the instructions. I would suggest that two notes be added to these instructions about using the supplied lubrication, one to actually show what and where the lubrication needs to be applied and the other note should be around handling of that lubrication, use of gloves and clean up with kerosene. It sticks to skin and wont wash off unless kerosene is used.\n
verified_user Verified Buyer - Anthony Walker - . Energy Suspension 3.5138 - 3 out of 5
