unarchive In The Box of 3.5163 keyboard_arrow_down
- 2 of 5288 - 30mm Sway Bar Bushings
- 1 of 9.11108 - Grease Packet
add_shopping_cart Suggested Parts 3keyboard_arrow_down
Dont forget to replace your endlinks at the same time you replace your sway bar bushings. Replacing both will ensure your sway bar work its' best!
3 - 5ML High Performance Grease by Energy
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 3.5163 | Front Sway Bar Bushing - 30 mm | Chevrolet Camaro 93-02
- 5 Star (2)
-
-
- 67%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (1)
-
-
- 33%
-
Energy Suspension 3.5163
starstar_borderstar_borderstar_borderstar_border" the website is deceiving, i thought i was buying bushings for an 11/16 "
See above. Editors Note: I looked at this order. The 3.5163 is for a 93-02 Firebird. He has a 69 Firebird. When ordering sway bar bushings make sure you know the diameter of the sway bar to insure fitment.
verified_user Verified Buyer - jim klein - . Energy Suspension 3.5163 - 1 out of 5starstarstarstarstar" Great fit! "
Better than those supplied by the manufacturer - the hole diameter matches the sway bar instead of being 3mm too small!
verified_user Verified Buyer - Steve Smith - . Energy Suspension 3.5163 - 5 out of 5starstarstarstarstar" Effective and sturdy item "
Noticeably enhances the stiffness of the overall handling of the vehicle, especially in respect to the front sway bar. I recommend this item, as it is an inexpensive way to boost your vehicles performance as well as being easy for any mechanic to install.
verified_user Verified Buyer - Jason Pavlovich - . Energy Suspension 3.5163 - 5 out of 5