unarchive In The Box of 3.5181 keyboard_arrow_down
- 2 of 5351 - Sway Bar Bushings
- 2 of Greaseable Brackets
- 8 of Endlink Grommets
- 8 of Metal Washers
- 2 of Metal Spacers
- 2 of Endlink Bolts
- 2 of Nylock Nuts
- 4 of Metal Washers
add_shopping_cart Suggested Parts 3keyboard_arrow_down
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.
Whiteline Gold Color Plated - 3 Year Warranty
3 - 5ML High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 3.5181 | Front Sway Bar Bushings-Endlinks - 30 mm | GMC Yukon
- 5 Star (8)
-
-
- 89%
-
- 4 Star (1)
-
-
- 11%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 3.5181
starstarstarstarstar" Review 2 Years Later "
Worked out great. Still holding up. Improved ride quality.
verified_user Verified Buyer - Peggy mulvey - . Energy Suspension 3.5181 - 5 out of 5starstarstarstarstar" good "
Good.
verified_user Verified Buyer - Sergey Korolev - . Energy Suspension 3.5181 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
Excellent parts, 35k miles later, still like new.
verified_user Verified Buyer - John K. smith - . Energy Suspension 3.5181 - 5 out of 5starstarstarstarstar" Huge difference "
After 15 years pretty much every bushing on my 97 K2500 Suburban 7.4 was worn out to the point of being useless. These sway bar bushings eliminated seemingly all front end roll during cornering. OK, an 8600 GVWR truck is never going to corner like a go-cart, but it is a huge improvement. Installation of the sway bar bushing is simple. Whether the installation of the end links is easy or not will depend on whether your bar lines up perfectly with the lower control arm-mine did not, so I wound up trimming them. Still, an easy install and great results.
verified_user Verified Buyer - Robert Dye - . Energy Suspension 3.5181 - 5 out of 5