unarchive In The Box of 3.5222 keyboard_arrow_down
- 2 of 5353 sway bar bushings
- 2 of 220.127.116.11 brackets
- 4 of the 15.03.69.39 washers (.812OD x .406 ID x 1.00)
- 2 of the 15.12.79.01 Endlinks
- 8 of the 8078 end link bushings
add_shopping_cart Suggested Parts 3keyboard_arrow_down
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 3.5222 | Front Sway Bar Bushings and Endlink - 28 mm | Silverado
- 5 Star (6)
- 4 Star (2)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)
Energy Suspension 3.5222
starstarstarstarstar" Review 2 Years Later "
The front end bushings and end links are still in fantastic condition. I dont believe that there is any deterioration to the steering crispness....and cosmetically, they are still in perfect condition..!verified_user Verified Buyer - Colin Ritchie - . Energy Suspension 3.5222 - 5 out of 5
starstarstarstarstar_border" Quality product easy to install "
Just installed but appears to be a quality product. Be sure to grease around the bar bushings before installing, the channels are very small and will not transport grease easily dry.verified_user Verified Buyer - Michael Rupp - . Energy Suspension 3.5222 - 4 out of 5
starstarstarstarstar_border" Good Quality "
Only issue: the mounting holes on the sway bar bushing bracket needed to be elongated a little for the mounting holes on the frame of my 2004 Chev. Silverado. The mounting holes are narrower than the bracket slightly.verified_user Verified Buyer - Michael Simonet - . Energy Suspension 3.5222 - 4 out of 5
starstarstarstarstar" Very good "
Overall this is a very good product. Install was a breeze and I couldnt believe how well the truck responded with the new links and bushings. Over all Im very happy and wish I had swapped them out sooner.verified_user Verified Buyer - Chris Okie - . Energy Suspension 3.5222 - 5 out of 5