unarchive In The Box of 4.18113 keyboard_arrow_down
- Transmission crossmember mount to frame
- bushing set:
- 4 - 4087 bushing
- 2 - 15.10.132.39 (3/4"O.D. x 7/16" I.D. x 4.500 sleeve)
- Front end control arm bushing set:
- 2 - 3236 lower control arm pivot bushing, rear position
- 2 - "U" shell (use with 3236 bushing)
- 2 - 15.10.33.39 (7/8"O.D. x 5/8"I.D. x 3.187 sleeve)
- 2 - 3237 lower control arm pivot bushing, front position
- 2 - "O" shell (use with 3237 bushing)
- 2 - 15.10.34.39 (7/8"O.D. x 5/8"I.D. x 3.00 sleeve )
- 1 - 17110 installation instructions
- Rear end control arm bushing set:
- 2 - 3027 lower control arm pivot bushing, axle end
- 2 - 3076 lower control arm pivot bushing body end (oval
- shape)
- 4 - 15.10.171.39 (3/4"O.D. x .480"I.D. x 2.900
- sleeve)lower arms
- 2 - 3028 upper control arm pivot bushing, body end
- 2 - 3029 upper control arm pivot bushing axle end
- 4 - 15.10.170.39 (3/4"O.D. x .480"I.D. x 2.400
- sleeve)upper arms
- 2 - 3098 thrust washer use with 3029 bushing
- 2 - 3099 thrust washer use with 3028 bushing
- 2 - 3101 thrust washer use with 3027 bushing
- 2 - 3109 thrust washer use with 3076 bushing
- 1 - 17041 installation instructions
- use 17019 installation instructions
- Front spring isolator set:
- 2 - 6070 upper
- 2 - 6071 lower
- Rear spring isolator set:
- 2 - 6053 upper
- 2 - 6054 lower
- Front McPherson strut tower bushing set:
- 2 - 2215 bottom bushing
- 2 - 2214 top bushing
- 2 - 15.10.51.39 (7/8"O.D. x 5/8"I.D. x 2.125 sleeve)
- 1 - 17275 installation instructions
- Front Swaybar endlink set :
- 8 - 4806 endlink grommets
- 2 - 15.10.47.39 (9/16"O.D. x 3/8"I.D. x 4.500" sleeve)
- 8 - 15.03.01.39 (cupped washer)
- 2 - 15.05.06.39 (3/8"-16 x 8.5" bolt)
- 2 - 15.07.01.40 (3/8"-16 nut)
- Rack and pinion bushing set for stock height to 1-1/4"
- lowered vehicles):
- 4 - 10003 bushing
- 1 - 17094 installation instructions
- Offset rack and pinion bushing set for vehicles
- lowered more than 1-1/4": (these offset rack bushings
- help correct the bump steer caused by lowering the
- vehicle):
- 4 - 10020 bushing
- use 17094 installation instructions
- Tie-rod boot set:
- 2 - 13001 tie-rod boot
- Grease:
- 3 - 9.11101 grease tub
add_shopping_cart Suggested Parts 3keyboard_arrow_down
There are a number of different size sway bars in your vehicle. You'll need to measure yours to ensure you purchase the correct size.
3 - 5ML High Performance Grease by Energy
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension HyperFlex Package Kit
Thinking about changing a bushing? Why not replace them all? Energy Suspension Master Kits include the bushings you need to completely revamp your suspension. Positions and parts vary from vehicle to vehicle, but each package contains the bushings that Energy Suspension offers.
Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration and harshness), but most drivers prefer the boost in performance in spite of that. Replacing the entirety of your suspension bushings maximizes your handling and ensures it stays that way for a long time.
Replacing the Faulty Rubber
O.E. Manufacturer's use of soft rubber bushings when making a car. This is great for dampening noise and vibrations, but not so great for performance or longevity. Once the rubber fails, that quiet and smooth ride will fail as well. Rubber is prone to failure due to wear and tear, UV rays, road grimes, and vehicle oils.
Be sure to use Formula 5
This Package will come with plenty of Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. So be sure to use more than enough lubricant when upgrading your suspension bushings. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.