4.18127 | Complete Suspension Bushing Kit | 15-16 Mustang, GT, V6

  • 4.18127 360image 1
  • 4.18127 Complete Suspension Bushing Kit - Mustang 15-16
  • 4.18127 Complete Suspension Bushing Kit - Mustang 15-16
  • 4.18127 Complete Suspension Bushing Kit - Mustang 15-16
  • 4.18127 Complete Suspension Bushing Kit - Mustang 15-16
  • 4.18127 Complete Suspension Bushing Kit - Mustang 15-16
  • 4.18127 360image large 1

Complete Suspension Bushing Kit - Mustang 15-16

Manufacturer: Energy Suspension
Part Number: 4.18127

:(?)
Black
Red
Price: $841.36

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Front Control Arm Bushing Set - Forward Position Only - 4.3170
  • 4 of 03P03575 - Front Position Outer
  • 2 of 03P03574 - Front Position Inner
  • 2 of 15P1068639 - Metal Sleeve (1.250 x .640 x 2.300)
  • 2 of 15P0206539 - Shell (2.837 x 2.250 x 2.300)
  • 1 of 17P17650 - Installation Instructions
  • Front Sway Bar Bushing Set - Mustang GT - 4.5199
  • 2 of 05P06025 - Sway Bar Bushing - 32mm (1.259 inch)
  • 2 of 15P0813242 - Shaft Collar
  • 1 of 17P17652 - Installation Instructions
  • Front Sway Bar Bushing Set - Mustang - 4.5200
  • 2 of 05P06024 - Sway Bar Bushing - 33.3mm (1.311 inch)
  • Rear Control Arm Bushing Set (must remove factory shells) - 4.3166
  • 4 of 03P03569 - Lower Control Arm Bushing - Outer
  • 2 of 03P03568 - Lower Control Arm Bushing - Inner
  • 2 of 15.10.515.39 - Metal Sleeve (1.125 x .640 x 2.563)
  • 2 of 08P08414 - Upper Control Arm Bushing - Outer
  • 2 of 15P0206339 - Shell (1.722 x 1.563 x 1.140)
  • 2 of 15P0206739 - Flanged Sleeve (2.125 O.A.L)
  • 2 of 08P08416 - Upper Control Arm Bushing - Inner
  • 2 of 15P0206139 - Shell (1.409 x 1.126 x 1.060)
  • 2 of 15.10.518.39 - Metal Sleeve (.875 x .500 x 1.565)
  • 2 of 08P08413 - Vertical Link Bushing - Upper
  • 2 of 15P0206339 - Shell (1.722 x 1.563 x 1.140)
  • 2 of 15P0206839 - Flanged Sleeve (1.820 O.A.L.)
  • 2 of 08P08412 - Vertical Link Bushing - Lower
  • 2 of 15P1070439 - Metal Sleeve (.875 x .563 x 1.480)
  • 2 of 15P0206139 - Shell (1.409 x 1.126 x 1.060)
  • 2 of 08P08411 - Rear Knuckle Bushing
  • 2 of 15P0206039 - Shell (1.926 x 1.643 x 1.190)
  • 2 of 15.10.673.39 - Metal Sleeve (1.000 x .563 x 1.650)
  • 1 of 17P17649 - Installation Instructions
  • Rear Sub Frame Bushing Set - 4.4122
  • 8 of 04P04358 - Sub Frame Bushing
  • 4 of 15P1070339 - Metal Sleeve (1.375 x .875 x 2.700)
  • 2 of 15.03.11.39 - Washer (3.00 x .563 x .125)
  • 1 of 17P17646 - Installation Instructions
  • Rear Differential Mount Bushing Set - 4.1139
  • 4 of 01P01337 - Differential Bushing
  • 2 of 15P1070138 - Metal Sleeve (1.500 x .563 x 2.750)
  • 2 of 15P1070238 - Metal Sleeve (1.500 x .563 x 2.625)
  • 2 of 15P0511540 - Bolt (M14 x 2.0 x 110mm)
  • 2 of 15P0511640 - Bolt (M14 x 2.0 x 130mm)
  • 2 of 15.07.37.40 - Flange Lock Nut (M14 x 2.0)
  • 4 of 15.03.138.39 - Washer (3.50 x .563 x .120)
  • 1 of 17P17677 - Installation Instructions
  • Rear Sway Bar Bushing Set - 4.5198
  • 2 of 05P06008 - Sway Bar Bushing - 22mm (0.866 Inch)
Suggested part for 4.18127: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
3 - 5ML High Performance Grease by Energy

Suggested part for 4.18127: 9.11104
9.11104 Formula 5 Prelube - 8oz. Tub Polyurethane Bushing Grease
8 ounce tub of High Performance Grease by Energy

  • Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

question_answer Ask us a Question

FitmentComplete Suspension Bushing Kit - Mustang 15-16 4.18127 fits these vehicles:
Details

4.18127 | Complete Suspension Bushing Kit | 15-16 Mustang, GT, V6

Includes:
  • Front Control Arm Bushings - 4.3170
  • Front Sway Bar Bushings Set 33.3mm - 4.5200
  • Rear Control Arm Bushings - 4.3166
  • Rear Sway Bar Bushing Set 22mm - 4.5198
  • Rear Differential Bushings - 4.1139
  • Subframe Mount Set - 4.4122

* 32mm (1.259 inch) Front Sway Bar Bushings included for the GT

Bushing Replacement Kit | 2015-2016 Mustang

This Complete Bushing Replacement Kit from Energy Suspension will replace the original rubber bushings in your '15-'16 Mustang or Mustang GT with premium polyurethane bushings. You will experience the benefits immediately including even tire wear, stable wheel alignment, better traction during a turn, and reduction of wheel hop.

...a performance replacement that will sharpen up your Mustang's handling and throttle response...
15-16 mustang polyuerthane bushing replacement kit

Upgrade your Mustang

Your Mustang is built for speed, but if you drive hard enough the rubber bushings that maintain wheel and drivetrain alignment can make controlling that speed difficult. Even brand new rubber bushings will flex and bend when your suspension travels. If you enjoy "spirited" driving or like to take a few laps at the Motor Sport Ranch in Cresson, TX every weekend then the original bushings on your Mustang are holding back the true potential of your pony.

If you're looking for a performance replacement that will sharpen up your Mustang's handling and throttle response then the American made Hyperflex Master Bushing Kit from Energy Suspension will upgrade the weakest points in your suspension with something that will perform better, for the life of your Mustang.

15-16 mustang gt front suspension bushings

Tighter Handling, Less Body Roll

Polyurethane front control arm bushings will hold your Mustang's front wheels at a steady camber angle during extreme turns that will bend the original rubber bushings out of shape and would allow the wheel to tilt, costing you traction and control.

The front sway bar bushings in this kit includes lateral locks and will actually produce the effect of a larger diameter performance sway bar for a fraction of the price. With these bushings and lateral locks installed you will notice less body roll and more grip from the front tires when cornering at high speed.

Better Traction, Instant Throttle Response

The rear control arm bushings and rear sway bar bushings in this kit will upgrade the handling of your Mustang, especially during a turn, by keeping the contact patch of your rear wheels flat on the road or track and reducing the body roll that the high lateral loads of high speed turning can produce.

Polyurethane rear subframe bushings create a sturdier platform for your rear suspension components and differential to attach to by connecting the subframe to the chassis more securely with bushings that won't change shape under pressure as easily as the original rubber. In addition the rear differential bushings will keep the power that your engine is sending to the rear wheels on track by holding the rear diff more securely instead of allowing it to jump. This means quicker take-offs, faster throttle response, and less wheel hop.

15-16 mustang polyurethane rear suspension bushings
lifetime warranty for bushing kit

Enhanced for Life

The bushings in this kit will resist the permanent shape change caused by the excessive wear of fast turns and hard launches that will eventually deform the original rubber bushings. We're so confident in the performance and longevity of these polyurethane bushings that Suspension.com backs them up with our exclusive lifetime warranty.

So, whether you spend your weekends attacking your personal best or tearing around sharp corners on back roads this complete bushing replacement kit will enhance your Mustang's throttle response and handling.

Energy Suspension 4.18127

Product Reviews for 4.18127 | Complete Suspension Bushing Kit | 15-16 Mustang, GT, V6

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 4.18127

5 out of 5 based on 1 user reviews. Write a Review

M
verified_user

starstarstarstarstar" Review 1 Year Later "

I have them for over a year now and they are doing a great job!\nThe car is better to handle.

verified_user Verified Buyer - - . Energy Suspension 4.18127 - 5 out of 5

question_answer Customer Questions and Answers


Question:
What is the durometer of the bushings in this kit?
Answer:
The durometer of Energy kit 4.18127 would be 80-88.