4.3122 | Continental | Front Control Arm Bushing Replacement Kit

  • 4.3122 360image 1
  • 4.3122 Front Lower Control Arm Bushings
  • 4.3122 Front Lower Control Arm Bushings
  • 4.3122 Front Lower Control Arm Bushings
  • 4.3122 Front Lower Control Arm Bushings
  • 4.3122 Front Lower Control Arm Bushings
  • 4.3122 360image large 1

Front Lower Control Arm Bushings

Manufacturer: Energy Suspension
Part Number: 4.3122

:(?)
Black

:(?)
Free Lifetime Warranty Upgrade
Price: $54.30

check_box In Stock check_box Ships Immediately


  • 2 - 3165 Main Bushings
  • 2 - 3166 Ends for 3165
  • 2 - Center Metal Sleeves for 3165
  • 1 - Formula 5 Prelube Tube
  • 1 - Installation Instructions #17019
Suggested part for 4.3122: 4.7118
4.7118 Front Strut Rod Bushings
The front strut arm bushings are often replaced along with the front control arm bushings. The strut arm and control arm bushings are closely related, so if you're replacing one - you would want to replace the other as well.

  • Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

question_answer Ask us a Question

FitmentFront Lower Control Arm Bushings 4.3122 fits these vehicles:
Details
Polyurethane Front Lower Control Arm Bushings
On the front of vehicles, they make a dramatic improvement in the way they handle with quicker steering response and greater vehicle control.

4.3122 | Continental | Front Control Arm Bushing Replacement Kit

Polyurethane Front Lower Control Arm Bushings
  • Maintains proper alignment under extreme conditions on and off-road and during competition.
  • Improves vehicle handling, cornering and overall control
  • Full floating, for smoother operation.
  • Made of Energy's HYPER FLEX performance polyurethane to add performance and durability
Footnotes
  • One Set Will Cover the Left and Right Side
  • Must Reuse Existing Outer Metal Shells
  • Includes Lower Arm Bushings Only

HyperFlex Control Arm Bushings

A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.

Energy Suspension Control Arm Bushing
Energy Suspension Control Arm Bushing

The Faulty O.E.

As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.

Be sure to use Formula 5

A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif

question_answer Customer Questions and Answers


Question:
Can you please give me the dimensions for Part Number 4.3122.
Answer:
For part number 4.3122, the OD is 1.32 inches, the ID is 1.005 inches, and the length is 3.66 inches.