unarchive In The Box of 4.3168 keyboard_arrow_down
- 4 of 3384 - Upper Bushings
- 2 of 3383 - Lower Front Bushings
- 1 of 3382 - Lower Rear Driver Side Bushings
- 1 of 3499 - Lower Rear Passenger Side Bushings
- 3 of 15.10.424.39 - Metal Sleeves - .875" OD x .625" ID x 3.275" LG
- 2 of 9.11114 - Grease
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.


The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.


Product Reviews for Ford Ranger | Front Control Arm Bushing Replacement Kit
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 4.3168
starstarstarstarstar" Great Product! "
Im a self taught shade tree mechanic. Having never before used urethane products I found the installation of the uppers just a bit more formal than the rubber products I was used too, but I just took my time and used the lube generously. The sway bar bushings were a snap - easy breezy. I will be a returning customer.
verified_user Verified Buyer - Evert Franklund - . Energy Suspension 4.3168 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Does part number 4.3168 cover both the upper and lower control arms?
- Answer:
- Yes this part 4.3168 does cover both left and right sides and both upper and lower control arms.
- Question:
- Does the 4.3168 come with adjustable bushings?
- Answer:
- the 4.3168 is an OE stock replacement, and will not be adjustable. The adjustable OE stock parts for your control arms would be the Cam bolts.
- Question:
- I only see part number 4.3168 which is for the 2003 ford ranger with coil springs. Will these fit the front torsion bar springs as well for the ranger?
- Answer:
- No, for the 2003 ford ranger with front torsion bar springs, you will need part number 4.3157.