unarchive In The Box of 4.5156 keyboard_arrow_down
- 2 of 5470 - Sway Bar Bushings
- 8 of Metal Washers
- 2 of Center Metal Spacers
- 8 of 8078 - Endlink Grommets
- 2 of Endlink Bolts
- 2 of Nylock Nuts
- 1 of 9.11108 - Grease Packet
add_shopping_cart Suggested Parts 3keyboard_arrow_down
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.
Whiteline Gold Color Plated - 3 Year Warranty
3 - 5ML High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 4.5156 | Front Sway Bar Bushings-Endlinks - 27 mm | Ford Ranger
- 5 Star (4)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 4.5156
starstarstarstarstar" Seems like a good product...really made a difference in my truck "
I installed the bushing in about two hours and had no problems. the truck handled much better. Good quality product at a fair price.
verified_user Verified Buyer - Buck Powers - . Energy Suspension 4.5156 - 5 out of 5starstarstarstarstar" Seems like a good product...really made a difference in my truck "
I installed the bushing in about two hours and had no problems. the truck handled much better. Good quality product at a fair price.
verified_user Verified Buyer - Buck Powers - . Energy Suspension 4.5156 - 5 out of 5starstarstarstarstar" Very satisfied! "
I had a clunky rattle in my front suspension on my 01 Ford Ranger. So I replaced the ball joints and bushings But the clunk remained. The only thing I didnt replace was the stabilizer bar bushings. I bought your 27mm urethane kit In "Red" cause it matches the truck, and installed them.it took me about a half hour and my test drive was noise free! Great product! I can expect years of rattle free Driving. Thank you
verified_user Verified Buyer - Brandon W. Shock - . Energy Suspension 4.5156 - 5 out of 5starstarstarstarstar" Very good product "
I am very satisfied
verified_user Verified Buyer - david williams - . Energy Suspension 4.5156 - 5 out of 5